SPI/I2C UART with 128-Word FIFOs in WLP MAX3108 37 Maxim Integrated Line Control" />
參數資料
型號： MAX3108EWA+T
廠商： Maxim Integrated Products
文件頁數： 31/56頁
文件大?。?/td> 0K
描述： IC UART
產品培訓模塊： Obsolescence Mitigation Program
標準包裝： 2,500
系列： *
SPI/I2C UART with 128-Word FIFOs in WLP
MAX3108
37
Maxim Integrated
Line Control Register (LCR)
Bit 7: RTSbit
The RTSbit bit provides direct control of the RTS output logic state. If RTSbit is logic 1, then RTS is logic 1; if it is logic
0, then RTS is logic 0. RTSbit only works when CLKSource[7]: CLKtoRTS is set low.
Bit 6: TxBreak
Set the TxBreak bit high to generate a line break whereby the TX output is held low. TX remains low until TxBreak is
set low.
Bit 5: ForceParity
The ForceParity bit enables forced parity that overrides normal parity generation. Set both the LCR[3]: ParityEn and
ForceParity bits high to use forced parity. In forced-parity mode, the parity bit is forced high by the transmitter if the
LCR[4]: EvenParity bit is low. The parity bit is forced low if EvenParity is high. Forced parity mode enables the transmit-
ter to control the address/data bit in 9-bit multidrop communication.
Bit 4: EvenParity
Set the EvenParity bit high to enable even parity for both the transmitter and receiver. If EvenParity is set low, odd par-
ity is used.
Bit 3: ParityEn
Set the ParityEn bit high to enable the use of a parity bit on the TX and RX interfaces. Set the ParityEn bit low to disable
parity usage.
If ParityEn is set low, then no parity bit is generated by the transmitter or expected by the receiver. If ParityEn is set
high, the transmitter generates the parity bit whose polarity is defined in LCR[4]: EvenParity, and the receiver checks
the parity bit according to the same polarity.
Bit 2: StopBits
The StopBits bit defines the number of stop bits and depends on the length of the word programmed in LCR[1:0]
(Table 1). For example, when StopBits is set high and the word length is 5, the transmitter generates a word with a
stop bit length equal to 1.5 baud periods. Under these conditions, the receiver recognizes a stop bit length greater
than a one-bit duration.
Bits 1 and 0: Lengthx
The Lengthx bits configure the length of the words that the transmitter generates and the receiver checks for at the
asynchronous TX and RX interfaces (Table 2).
Table 1. StopBits Truth Table
Table 2. Lengthx Truth Table
ADDRESS:
0x0B
MODE:
R/W
BIT
7
6
5
4
3
2
1
0
NAME
RTSbit
TxBreak
ForceParity
EvenParity
ParityEn
StopBits
Length1
Length0
RESET
0
1
0
1
StopBits
WORD LENGTH
STOP BIT LENGTH
0
5, 6, 7, 8
1
5
1–1.5
1
6, 7, 8
2
Length1
Length0
WORD LENGTH
0
5
0
1
6
1
0
7
1
8
相關PDF資料
PDF描述
MAX3109ETJ+ SEMICONDUCTOR OTHER
MAX310CPE IC VIDEO MULTIPLEXER 8X1 16DIP
MAX3110EENI+G36 IC UART SPI COMPAT 28-DIP
MAX3120CUA+ IC TXRX INFRARED IRDA 8-UMAX
MAX3120EUA IC TXRX 3V IRDA IR 3V 8-UMAX
相關代理商/技術參數
參數描述
MAX3109ETJ+ 功能描述:UART 接口集成電路 Dual Serial UART with 128-Word FIFOs RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
MAX3109ETJ+T 功能描述:UART 接口集成電路 Dual Serial UART with 128-Word FIFOs RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
MAX310C/D 功能描述:多路器開關 IC RoHS:否 制造商:Texas Instruments 通道數量:1 開關數量:4 開啟電阻（最大值）:7 Ohms 開啟時間（最大值）: 關閉時間（最大值）: 傳播延遲時間:0.25 ns 工作電源電壓:2.3 V to 3.6 V 工作電源電流: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:UQFN-16
MAX310CPE 功能描述:多路器開關 IC RoHS:否 制造商:Texas Instruments 通道數量:1 開關數量:4 開啟電阻（最大值）:7 Ohms 開啟時間（最大值）: 關閉時間（最大值）: 傳播延遲時間:0.25 ns 工作電源電壓:2.3 V to 3.6 V 工作電源電流: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:UQFN-16
MAX310CPE+ 功能描述:多路器開關 IC 8:1 Unbuffered RF Video MUX RoHS:否 制造商:Texas Instruments 通道數量:1 開關數量:4 開啟電阻（最大值）:7 Ohms 開啟時間（最大值）: 關閉時間（最大值）: 傳播延遲時間:0.25 ns 工作電源電壓:2.3 V to 3.6 V 工作電源電流: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:UQFN-16
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*