參數資料
型號： M37560ME-XXXFP
廠商： Mitsubishi Electric Corporation
英文描述： SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
中文描述： 單芯片8位CMOS微機
文件頁數： 30/65頁
文件大?。?/td> 955K
代理商： M37560ME-XXXFP
SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
MITSUBISHI MICROCOMPUTERS
7560 Group
30
[Transmit Buffer/Receive Buffer Register (TB/
RB)] 0018
16
The transmit buffer register and the receive buffer register are lo-
cated at the same address. The transmit buffer register is write-
only and the receive buffer register is read-only. If a character bit
length is 7 bits, the MSB of data stored in the receive buffer regis-
ter is
“
0
”
.
[Serial I/O1 Status Register (SIO1STS)]
0019
16
The read-only serial I/O1 status register consists of seven flags
(bits 0 to 6) which indicate the operating status of the serial I/O1
function and various errors.
Three of the flags (bits 4 to 6) are valid only in UART mode.
The receive buffer full flag (bit 1) is cleared to
“
0
”
when the receive
buffer is read.
If there is an error, it is detected at the same time that data is
transferred from the receive shift register to the receive buffer reg-
ister, and the receive buffer full flag is set. A write to the serial I/O1
status register clears all the error flags OE, PE, FE, and SE (bit 3
to bit 6, respectively). Writing
“
0
”
to the serial I/O1 enable bit SIOE
(bit 7 of the Serial I/O1 Control Register) also clears all the status
flags, including the error flags.
All bits of the serial I/O1 status register are initialized to
“
0
”
at re-
set, but if the transmit enable bit (bit 4) of the serial I/O1 control
register has been set to
“
1
”
, the transmit shift register shift comple-
tion flag (bit 2) and the transmit buffer empty flag (bit 0) become
“
1
”
.
[Serial I/O1 Control Register (SIO1CON)]
001A
16
The serial I/O1 control register contains eight control bits for the
serial I/O1 function.
[UART Control Register (UARTCON)] 001B
16
The UART control register consists of four control bits (bits 0 to 3)
which are valid when asynchronous serial I/O is selected and set
the data format of an data transfer. One bit in this register (bit 4) is
always valid and sets the output structure of the P4
5
/T
X
D pin.
[Baud Rate Generator (BRG)] 001C
16
The baud rate generator determines the baud rate for serial trans-
fer.
The baud rate generator divides the frequency of the count source
by 1/(n + 1), where n is the value written to the baud rate genera-
tor.
I
Notes on serial I/O
When setting the transmit enable bit to
“
1
”
, the serial I/O1 transmit
interrupt request bit is automatically set to
“
1
”
. When not requiring
the interrupt occurrence synchronous with the transmission
enalbed, take the following sequence.
Set the serial I/O1 transmit interrupt enable bit to
“
0
”
(disabled).
Set the transmit enable bit to
“
1
”
.
Set the serial I/O1 transmit interrupt request bit to
“
0
”
after 1 or
more instructions have been executed.
Set the serial I/O1 transmit interrupt enable bit to
“
1
”
(enabled).
相關PDF資料
PDF描述
M37560ME-XXXGP SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37560MF-XXXFP CAP 68UF 100VDC FILM POWER
M37630E4FP Connector
M37630M4T-XXXFP SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37630M4T-XXXFS SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
相關代理商/技術參數
參數描述
M37560ME-XXXGP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37560MF 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37560MF-324GP 制造商:Renesas Electronics Corporation 功能描述:
M37560MF-330GP 制造商:Renesas Electronics Corporation 功能描述:
M37560MFA-XXXFP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*