參數資料
型號: M37517F8HP
元件分類: 微控制器/微處理器
英文描述: 8-BIT, FLASH, 4 MHz, MICROCONTROLLER, PQFP48
封裝: 7 X 7 MM, 0.50 MM PITCH, PLASTIC, LQFP-48
文件頁數: 51/100頁
文件大?。?/td> 899K
代理商: M37517F8HP
Rev.1.01
Aug 02, 2004
page 52 of 96
7517 Group
Fig. 57 Ceramic resonator circuit
Fig. 58 External clock input circuit
Oscillation Control
(1) Stop mode
If the STP instruction is executed, the internal clock
φ stops at an
“H” level, and high-speed on-chip oscillation clock or XIN and XCIN
oscillation stops. When the oscillation stabilizing time set after
STP instruction released bit is “0”, the prescaler 12 is set to “FF16
and timer 1 is set to “0116”. When the oscillation stabilizing time
set after STP instruction released bit is “1”, set the sufficient time
for oscillation of used oscillator to stabilize since nothing is set to
the prescaler 12 and timer 1.
Either high-speed on-chip oscillation clock, or XIN or XCIN divided
by 16 is input to the prescaler 12 as count source. Oscillator re-
starts when an external interrupt is received, but the internal clock
φ is not supplied to the CPU (remains at “H”) until timer 1
underflows. The internal clock
φ is supplied for the first time, when
timer 1 underflows. This ensures time for the clock oscillation us-
ing the ceramic resonators to be stabilized. When the oscillator is
____________
restarted by reset, apply “L” level to the RESET pin until the oscil-
lation is stable since a wait time will not be generated.
In case of using high-speed on-chip oscillation clock as main
clock, the oscillation stabilizing time does not almost need.
(2) Wait mode
If the WIT instruction is executed, the internal clock
φ stops at an
“H” level, but the oscillator does not stop. The internal clock
φ re-
starts at reset or when an interrupt is received. Since the oscillator
does not stop, normal operation can be started immediately after
the clock is restarted.
To ensure that the interrupts will be received to release the STP or
WIT state, their interrupt enable bits must be set to “1” before ex-
ecuting of the STP or WIT instruction.
When releasing the STP state, the prescaler 12 and timer 1 will
start counting the high-speed on-chip oscillation clock or XIN di-
vided by 16. Accordingly, set the timer 1 interrupt enable bit to “0”
before executing the STP instruction.
sNote
When using XIN-XOUT oscillation by using an external resonator, in
case of using the oscillation stabilizing time set after STP instruc-
tion released bit set to “1”, evaluate time to stabilize oscillation of
the used oscillator and set the value to the timer 1 and prescaler
12.
Fig.59 On-chip oscillation circuit and 32kHz CR oscillation
circuit
XCIN
XCOUT
XIN
XOUT
CIN
COUT
CCIN
CCOUT
Rf
Rd
XCIN
XCOUT
XIN
XOUT
CCIN
CCOUT
Rf
Rd
Open
External oscillation
circuit
Vcc
Vss
XIN
XOUT
XCIN
XCOUT
82k
120pF
Open
相關PDF資料
PDF描述
M37532RSS 8-BIT, 6 MHz, MICROCONTROLLER
M37544G2GP 8-BIT, OTPROM, 8 MHz, MICROCONTROLLER, PQFP32
M37544M2-XXXSP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PDIP32
M37544M2-XXXSP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PDIP32
M37544M2-XXXGP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PQFP32
相關代理商/技術參數
參數描述
M37530T-PTC 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:Converter for Connecting 42-pin 1.778mm-pitch SDIP to a 40-pin Narrow-pitch Connector (for 7531, 7540, 7542 and 7544 Groups)
M37530T-PTCB 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:Converter for Connecting 40-pin Narrow-pitch Connector to 32-pin 0.8mm-pitch LQFP (for 7531, 7532, 7534, 7540, 7542 and 7544 Groups)
M37530T-PTCC 功能描述:DEV 42-PIN RSS/MCU TO 32-PIN 1.7 RoHS:否 類別:編程器,開發系統 >> 配件 系列:- 標準包裝:1 系列:- 附件類型:適配器板 適用于相關產品:RCB230,RCB231,RCB212 配用:26790D-ND - RCB BREAKOUT BOARD RS232 CABLE
M37531E4FP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37531E4FP#U0 制造商:Renesas Electronics Corporation 功能描述:MITSUBISHI 8 BIT OTP MCU