參數資料
型號: LU3X54FTL-HS208-DB
英文描述: QUAD-FET for 10Base-T/100Base-TX/FX
中文描述: 四核10Base-T/100Base-TX/FX場效應管
文件頁數: 20/54頁
文件大?。?/td> 677K
代理商: LU3X54FTL-HS208-DB
LU3X54FT
QUAD-FET for 10Base-T/100Base-TX/FX
Data Sheet
July 2000
20
Lucent Technologies Inc.
93
92
90
89
TX_EN10/[D:A]/
SECURITY_10/100
I
Transmit Enable—10 Mbits/s Mode.
When driven high, this signal indicates
that there is valid data on TXD when the corresponding channel is in
10 Mbits/s serial mode.
Security for 10/100 Mbits/s Smart Mode.
When SMART_MODE_SELECT
is enabled, these pins are redefined to be the security input pins for both
10 Mbits/s and 100 Mbits/s. When security is activated, the LU3X54FT will
ignore the transmit data, and a fixed pattern is transmitted (all 1s for 10Base-T,
alternating 1, 0 for 100TX).
Security should not be asserted until after the entire preamble has been trans-
mitted. When in smart mode, the 10 Mbits/s transmit channels will be enabled
through the TX_EN100 inputs.
Transmit Enable—100 Mbits/s Mode.
When SMART_MODE_SELECT is not
enabled and TX_EN100 is driven high, this signal indicates that there is valid
data on TXD_100[3:0] when in 100 Mbits/s mode. If the individual channel is
not configured for 100 Mbits/s mode, this input will be ignored.
Transmit Enable—10/100 Mbits/s Smart Mode.
When
SMART_MODE_SELECT is asserted and TX_EN100 is driven high, this sig-
nal indicates that its channel’s input data is valid. The input data is selected by
the speed of the corresponding channel.
Shared Transmit Coding Error.
When asserted high, this signal causes the
encoder to intentionally corrupt the byte being transmitted across the MII
(00100 will be transmitted). This signal is not used in 10 Mbits/s mode.
Collision Detect for 10 Mbits/s Mode.
In half-duplex mode, this signal signi-
fies that a collision has occurred on the network. COL_10 is asserted high
whenever there is transmit and receive activity on the UTP media. COL_10 is
the logical AND of TX_EN and receive activity, and it is an asynchronous out-
put.
96
63
146
123
TX_EN100[D:A]/
TX_EN10/100
I
122
TX_ER
I
76
75
74
72
COL_10[D:A]
O
When SERIAL_SEL is high and in 10Base-T mode, this signal indicates that
the jabber timer has expired. When SMART_MODE_SELECT is asserted, the
LU3X54FT will internally OR together the COL_10 and COL_100 signals and
output them on the COL_100 pins.
Collision Detect for 100 Mbits/s Mode.
In half-duplex mode, this signal signi-
fies that a collision has occurred on the network. COL_100 is asserted high
whenever there is transmit and receive activity on the UTP media. COL_100 is
the logical AND of TX_EN and receive activity, and it is an asynchronous out-
put.
Collision Detect for 10/100 Mbits/s Smart Mode.
When SERIAL_SEL is
high and in 10Base-T mode, this signal indicates that the jabber timer has
expired. When SMART_MODE_SELECT is asserted, the LU3X54FT will inter-
nally OR together the COL_10 and COL_100 signals and output them on the
COL_100 pins.
100
67
150
127
COL_100[D:A]/
COL_10/100[D:A]
O
Pin Information
(continued)
Pin Descriptions
(continued)
When operating in bused MII mode, 100 Mbits/s data is bused to MII port A, and 10 Mbits/s data is bused to MII
port B.
Table 4. MII/Serial Interface Pins in Bused MII Mode
(continued)
Pin
Signal
Type
Description
相關PDF資料
PDF描述
LU3X54FT Quad-FET (Fast Ethernet Transceiver) for 10Base-T/100Base-TX/FX(應用于10基數-T和100基數-TX/FX的四快速以太網收發器)
LU5X34F Quad Gigabit Ethernet Transceiver
LU5X34F Quad Gigabit Ethernet Transceiver(千兆位以太網四收發器)
LUCL8551AAU Subscriber Line Interface Circuit
LUCL8551AP Subscriber Line Interface Circuit
相關代理商/技術參數
參數描述
LU3X54FTLHS208-DB 制造商:Alcatel-Lucent 功能描述:3X54FTLHS208-DB
LU400 制造商:MA-COM 制造商全稱:M/A-COM Technology Solutions, Inc. 功能描述:NEMA Cabinet Legs
LU400/D 制造商:OSRAM 功能描述:400W MOGUL BASED GENERAL LIGHTING HIGH PRESSURE SODIUM LAMP, COATED, DAYLIGHT, U
LU400/PLUS/ECO 制造商:OSRAM 功能描述:400W NON CYCLING, ENVIRONMENTALLY FRIENDLIER HIGH PRESSURE SODIUM LAMP, CLEAR, U
LU47 制造商:Thomas & Betts 功能描述:1-1/4 CONDUIT BODY,IRON,LU,F-7