參數資料
型號： KSZ8862-16MQL-FX
廠商： Micrel Inc
文件頁數： 114/125頁
文件大?。?/td> 0K
描述： IC SWITCH ETH 2P 16BIT 128PQFP
標準包裝： 66
系列： KSZ8862
控制器類型： 以太網開關控制器
接口： PCI
安裝類型： 表面貼裝
封裝/外殼： 128-BFQFP
供應商設備封裝： 128-PQFP（14x20）
包裝： 托盤
產品目錄頁面： 1081 (CN2011-ZH PDF)
配用： 576-1638-ND - BOARD EVALUATION KSZ8862-10FL
576-1637-ND - BOARD EVALUATION KSZ8862-100FX
其它名稱： 576-3271
Micrel, Inc.
KSZ8862-16/32MQL
April 2007
89
M9999-040407-3.0
Bit
Default
R/W
Description
1
0
RW
Tag Removal
1 = when packets are output on the port, the switch removes 802.1p/q tags from packets with
802.1p/q tags when received. The switch will not modify packets received without tags.
0 = disable tag removal.
0
RW
TX Multiple Queues Select Enable
1 = the port output queue is split into four priority queues.
0 = single output queue on the port. There is no priority differentiation even though packets are
classified into high or low priority.
Bank 48 Port 1 Control Register 2 (0x02): P1CR2
This register contains the global per port control for the switch function.
Bit
Default
R/W
Description
15
0
RW
Reserved
14
0
RW
Ingress VLAN Filtering
1= the switch discards packets whose VID port membership in VLAN table bits [18:16] does not
include the ingress port VID.
0 = no ingress VLAN filtering.
13
0
RW
Discard Non PVID Packets
1 = the switch discards packets whose VID does not match the ingress port default VID.
0 = no packets are discarded.
12
0
RW
Force Flow Control
1 = always enable flow control on the port, regardless of AN result.
0 = the flow control is enabled based on AN result.
11
0
RW
Back Pressure Enable
1 = enable port’s half-duplex back pressure.
0 = disable port’s half-duplex back pressure.
10
1
RW
Transmit Enable
1 = enable packet transmission on the port.
0 = disable packet transmission on the port.
9
1
RW
Receive Enable
1 = enable packet reception on the port.
0 = disable packet reception on the port.
8
0
RW
Learning Disable
1 = disable switch address learning capability.
0 = enable switch address learning.
7
0
RW
Sniffer Port
1 = port is designated as a sniffer port and transmits packets that are monitored.
0 = port is a normal port.
6
0
RW
Receive Sniff
1 = all packets received on the port are marked as “monitored packets” and forwarded to the
designated “sniffer port.”
0 = no receive monitoring.
5
0
RW
Transmit Sniff
1 = all packets transmitted on the port are marked as “monitored packets” and forwarded to the
designated “sniffer port.”
0 = no transmit monitoring.
4
0
RW
Reserved
相關PDF資料
PDF描述
PIC16LF726-E/SO IC PIC MCU FLASH 8KX14 28-SOIC
0731010340 BNC JACK VERTICAL PCB 75 OHM
V300A5C400BF CONVERTER MOD DC/DC 5V 400W
V300A5C400BL3 CONVERTER MOD DC/DC 5V 400W
PIC16LC620A-04/SS IC MCU OTP 512X14 COMP 20SSOP
相關代理商/技術參數
參數描述
KSZ8862-32MQL 功能描述:以太網 IC 2-Port Ethernet Switch/Repeater + Generic (32-bit) bus interface. Fiber Capabilities on Port-1(Lead Free) RoHS:否 制造商:Micrel 產品:Ethernet Switches 收發器數量:2 數據速率:10 Mb/s, 100 Mb/s 電源電壓-最大:1.25 V, 3.45 V 電源電壓-最小:1.15 V, 3.15 V 最大工作溫度:+ 85 C 封裝 / 箱體:QFN-64 封裝:Tray
KSZ8862-32MQL-FX 功能描述:以太網 IC 2-Port Ethernet Switch/Repeater + Generic (32-bit) bus interface. Fiber Capabilities on Port-1(Lead Free) RoHS:否 制造商:Micrel 產品:Ethernet Switches 收發器數量:2 數據速率:10 Mb/s, 100 Mb/s 電源電壓-最大:1.25 V, 3.45 V 電源電壓-最小:1.15 V, 3.15 V 最大工作溫度:+ 85 C 封裝 / 箱體:QFN-64 封裝:Tray
KSZ8862-MQL 制造商:MICREL 制造商全稱:Micrel Semiconductor 功能描述:2-Port Ethernet Switch with Non-PCI Interface and Fiber Support
KSZ8863FLL 功能描述:以太網 IC 3-Port 10/100 Ethernet Switch with 1x FX Port and 1x TX Port (Lead Free) RoHS:否 制造商:Micrel 產品:Ethernet Switches 收發器數量:2 數據速率:10 Mb/s, 100 Mb/s 電源電壓-最大:1.25 V, 3.45 V 電源電壓-最小:1.15 V, 3.15 V 最大工作溫度:+ 85 C 封裝 / 箱體:QFN-64 封裝:Tray
KSZ8863FLL-EVAL 功能描述:以太網開發工具 3-Port 10/100 Ethernet Switch with 1x FX Port and 1x TX Port - Evaluation Board RoHS:否 制造商:Micrel 產品:Evaluation Boards 類型:Ethernet Transceivers 工具用于評估:KSZ8873RLL 接口類型:RMII 工作電源電壓:
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*