參數資料
型號: DSPB56367AG150
廠商: Freescale Semiconductor
文件頁數: 5/100頁
文件大?。?/td> 0K
描述: IC DSP 24BIT 150MHZ 144-LQFP
標準包裝: 60
系列: DSP56K/Symphony
類型: 音頻處理器
接口: 主機接口,I²C,SAI,SPI
時鐘速率: 150MHz
非易失內存: ROM(240 kB)
芯片上RAM: 69kB
電壓 - 輸入/輸出: 3.30V
電壓 - 核心: 1.80V
工作溫度: -40°C ~ 95°C
安裝類型: 表面貼裝
封裝/外殼: 144-LQFP
供應商設備封裝: 144-LQFP(20x20)
包裝: 托盤
Parallel Host Interface (HDI08)
DSP56367 Technical Data, Rev. 2.1
2-8
Freescale Semiconductor
2.10
Parallel Host Interface (HDI08)
The HDI08 provides a fast, 8-bit, parallel data port that may be connected directly to the host bus. The
HDI08 supports a variety of standard buses and can be directly connected to a number of industry standard
microcomputers, microprocessors, DSPs, and DMA hardware.
Table 2-9 Host Interface
Signal Name
Type
State During
Reset
Signal Description
H0–H7
HAD0–HAD7
PB0–PB7
Input/
Output
Input/
Output
Input, Output, or
Disconnected
GPIO
Disconnected
Host Data—When HDI08 is programmed to interface a nonmultiplexed host
bus and the HI function is selected, these signals are lines 0–7 of the
bidirectional, tri-state data bus.
Host Address/Data—When HDI08 is programmed to interface a multiplexed
host bus and the HI function is selected, these signals are lines 0–7 of the
address/data bidirectional, multiplexed, tri-state bus.
Port B 0–7—When the HDI08 is configured as GPIO, these signals are
individually programmable as input, output, or internally disconnected.
The default state after reset for these signals is GPIO disconnected.
These inputs are 3.3V tolerant.
HA0
HAS/HAS
PB8
Input
Input, Output, or
Disconnected
GPIO
Disconnected
Host Address Input 0—When the HDI08 is programmed to interface a
nonmultiplexed host bus and the HI function is selected, this signal is line 0 of
the host address input bus.
Host Address Strobe—When HDI08 is programmed to interface a
multiplexed host bus and the HI function is selected, this signal is the host
address strobe (HAS) Schmitt-trigger input. The polarity of the address strobe
is programmable, but is configured active-low (HAS) following reset.
Port B 8—When the HDI08 is configured as GPIO, this signal is individually
programmed as input, output, or internally disconnected.
The default state after reset for this signal is GPIO disconnected.
This input is 3.3V tolerant.
HA1
HA8
PB9
Input
Input, Output, or
Disconnected
GPIO
Disconnected
Host Address Input 1—When the HDI08 is programmed to interface a
nonmultiplexed host bus and the HI function is selected, this signal is line 1 of
the host address (HA1) input bus.
Host Address 8—When HDI08 is programmed to interface a multiplexed host
bus and the HI function is selected, this signal is line 8 of the host address
(HA8) input bus.
Port B 9—When the HDI08 is configured as GPIO, this signal is individually
programmed as input, output, or internally disconnected.
The default state after reset for this signal is GPIO disconnected.
This input is 3.3V tolerant.
相關PDF資料
PDF描述
DSPB56371AF180 IC DSP 24BIT 180MHZ 80-LQFP
DSPB56374AEC IC DSP 24BIT 150MHZ 52-LQFP
DSPB56720CAG DSP 24BIT AUD 200MHZ 144-LQFP
DSPB56724AG DSP 24BIT AUD 250MHZ 144-LQFP
DSPIC30F2010T-20E/MM IC DSPIC MCU/DSP 12K 28QFN
相關代理商/技術參數
參數描述
DSPB56367PV150 功能描述:數字信號處理器和控制器 - DSP, DSC 150Mhz/ 150MIPS RoHS:否 制造商:Microchip Technology 核心:dsPIC 數據總線寬度:16 bit 程序存儲器大小:16 KB 數據 RAM 大小:2 KB 最大時鐘頻率:40 MHz 可編程輸入/輸出端數量:35 定時器數量:3 設備每秒兆指令數:50 MIPs 工作電源電壓:3.3 V 最大工作溫度:+ 85 C 封裝 / 箱體:TQFP-44 安裝風格:SMD/SMT
DSPB5636AG120 制造商:Freescale Semiconductor 功能描述:
DSPB56371AF150 功能描述:數字信號處理器和控制器 - DSP, DSC 150 MHZ VERSION DSPB371 RoHS:否 制造商:Microchip Technology 核心:dsPIC 數據總線寬度:16 bit 程序存儲器大小:16 KB 數據 RAM 大小:2 KB 最大時鐘頻率:40 MHz 可編程輸入/輸出端數量:35 定時器數量:3 設備每秒兆指令數:50 MIPs 工作電源電壓:3.3 V 最大工作溫度:+ 85 C 封裝 / 箱體:TQFP-44 安裝風格:SMD/SMT
DSPB56371AF180 功能描述:數字信號處理器和控制器 - DSP, DSC BLANK ROM VERSION 56371 RoHS:否 制造商:Microchip Technology 核心:dsPIC 數據總線寬度:16 bit 程序存儲器大小:16 KB 數據 RAM 大小:2 KB 最大時鐘頻率:40 MHz 可編程輸入/輸出端數量:35 定時器數量:3 設備每秒兆指令數:50 MIPs 工作電源電壓:3.3 V 最大工作溫度:+ 85 C 封裝 / 箱體:TQFP-44 安裝風格:SMD/SMT
DSPB56371AF180 制造商:Freescale Semiconductor 功能描述:Digital Signal Processor (DSP) IC