參數資料
型號： DSP56366UM
廠商： 飛思卡爾半導體(中國)有限公司
元件分類： 數字信號處理
英文描述： 24-Bit Audio Digital Signal Processor
中文描述： 24位音頻數字信號處理器
文件頁數： 13/110頁
文件大小： 1273K
代理商： DSP56366UM
DSP56366 Technical Data, Rev. 3.1
Freescale Semiconductor
2-9
2.7
Parallel Host Interface (HDI08)
The HDI08 provides a fast, 8-bit, parallel data port that may be connected directly to the host bus. The
HDI08 supports a variety of standard buses and can be directly connected to a number of industry standard
microcomputers, microprocessors, DSPs, and DMA hardware.
Table 2-9 Host Interface
Signal Name
Type
State during
Reset
Signal Description
H0–H7
Input/
output
GPIO
disconnected
Host Data—
When HDI08 is programmed to interface a nonmultiplexed host
bus and the HI function is selected, these signals are lines 0–7 of the
bidirectional, tri-state data bus.
HAD0–HAD7
Input/
output
GPIO
disconnected
Host Address/Data—
When HDI08 is programmed to interface a
multiplexed host bus and the HI function is selected, these signals are lines
0–7 of the address/data bidirectional, multiplexed, tri-state bus.
PB0–PB7
Input, output, or
disconnected
GPIO
disconnected
Port B 0–7
—When the HDI08 is configured as GPIO, these signals are
individually programmable as input, output, or internally disconnected.
The default state after reset for these signals is GPIO disconnected.
These inputs are 5 V tolerant.
HA0
Input
GPIO
disconnected
Host Address Input 0
—When the HDI08 is programmed to interface a
nonmultiplexed host bus and the HI function is selected, this signal is line 0
of the host address input bus.
HAS/HAS
Input
GPIO
disconnected
Host Address Strobe—
When HDI08 is programmed to interface a
multiplexed host bus and the HI function is selected, this signal is the host
address strobe (HAS) Schmitt-trigger input. The polarity of the address
strobe is programmable, but is configured active-low (HAS) following reset.
PB8
Input, output, or
disconnected
GPIO
disconnected
Port B 8
—When the HDI08 is configured as GPIO, this signal is individually
programmed as input, output, or internally disconnected.
The default state after reset for this signal is GPIO disconnected.
This input is 5 V tolerant.
HA1
Input
GPIO
disconnected
Host Address Input 1
—When the HDI08 is programmed to interface a
nonmultiplexed host bus and the HI function is selected, this signal is line 1
of the host address (HA1) input bus.
HA8
Input
GPIO
disconnected
Host Address 8
—When HDI08 is programmed to interface a multiplexed
host bus and the HI function is selected, this signal is line 8 of the host
address (HA8) input bus.
PB9
Input, output, or
disconnected
GPIO
disconnected
Port B 9
—When the HDI08 is configured as GPIO, this signal is individually
programmed as input, output, or internally disconnected.
The default state after reset for this signal is GPIO disconnected.
This input is 5 V tolerant.
相關PDF資料
PDF描述
DSP56367P 24-Bit Audio Digital Signal Processor
DSP56367UM 24-Bit Audio Digital Signal Processor
DSP56600 Implementing Viterbi Decoders Using the VSL Instruction on DSP Families
DSP56852E 16-bit Digital Signal Controllers
DSP56852VFE 16-bit Digital Signal Controllers
相關代理商/技術參數
參數描述
DSP56367 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Optoelectronic
DSP56367P 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:24-Bit Audio Digital Signal Processor
DSP56367UM 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:24-Bit Audio Digital Signal Processor
DSP56371 制造商:MOTOROLA 制造商全稱:Motorola, Inc 功能描述:high density CMOS device
DSP56371AF180 制造商:Freescale Semiconductor 功能描述:
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*