參數資料
型號： BX80532PC2200D
廠商： INTEL CORP
元件分類： 微控制器/微處理器
英文描述： 32-BIT, 2200 MHz, MICROPROCESSOR, XMA
封裝： BOXED PROCESSOR
文件頁數： 7/88頁
文件大小： 1502K
代理商： BX80532PC2200D
Intel Pentium 4 Processor on 0.13 Micron Process Datasheet
15
Electrical Specifications
Electrical Specifications
2
2.1
System Bus and GTLREF
Most Pentium 4 processor on 0.13 micron process system bus signals use Assisted Gunning
Transceiver Logic (AGTL+) signalling technology. As with the P6 family of microprocessors, this
signalling technology provides improved noise margins and reduced ringing through low voltage
swings and controlled edge rates. Like the Pentium 4 processor in the 478-pin package, the
termination voltage level for the Pentium 4 processor on 0.13 micron process AGTL+ signals is
VCC, which is the operating voltage of the processor core. The use of a termination voltage that is
determined by the processor core allows better voltage scaling on the system bus for the Pentium 4
processor on 0.13 micron process. Because of the speed improvements to data and address bus,
signal integrity and platform design methods have become more critical than with previous
processor families. Design guidelines for the Pentium 4 processor on 0.13 micron process system
bus are detailed in the appropriate platform design guide (refer to Table 1-1).
The AGTL+ inputs require a reference voltage (GTLREF) that is used by the receivers to determine
if a signal is a logical 0 or a logical 1. GTLREF must be generated on the system board.
Termination resistors are provided on the processor silicon and are terminated to its core voltage
(VCC). The Intel 875P chipset, Intel 865G/865GV/865PE/865P chipsets, Intel 850 chipset, and
the Intel 845 chipset also provide on-die termination. This eliminates the need to terminate the
bus on the system board for most AGTL+ signals. However, some AGTL+ signals do not include
on-die termination and must be terminated on the system board. For more information, refer to the
appropriate platform design guide.
The AGTL+ bus depends on incident wave switching. Therefore, timing calculations for AGTL+
signals are based on flight time as opposed to capacitive deratings. Analog signal simulation of the
system bus, including trace lengths, is highly recommended when designing a system. For more
information, refer to the appropriate platform design guide.
2.2
Power and Ground Pins
For clean on-chip power distribution, the Pentium 4 processor on 0.13 micron process has 85 VCC
(power) and 180 VSS (ground) inputs. All power pins must be connected to VCC, while all VSS
pins must be connected to a system ground plane.The processor VCC pins must be supplied with
the voltage defined by the VID (Voltage ID) pins and the loadline specifications (see Figure 2-4).
相關PDF資料
PDF描述
BU-61588F0-100W 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQFP72
BU-61588F3-482L 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQFP72
BU-61588F3-592S 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQFP72
BU-61588G0-200Z 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQFP72
BU-61588G0-500 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQFP72
相關代理商/技術參數
參數描述
BX80532PC2400D 制造商:Intel 功能描述:MPU PENTIUM 4 NETBURST 64-BIT 0.13UM 2.4GHZ - Boxed Product (Development Kits)
BX80532PC2500D 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Microprocessor
BX80532PC2600D 制造商:Intel 功能描述:P4 Socket 478 2.6GHz with Fan
BX80532PE2266D 制造商:Intel 功能描述:MPU PENTIUM 4 PROCESSOR NETBURST 64-BIT 0.13UM 2.26GHZ 478- - Boxed Product (Development Kits)
BX80532PE2400D 制造商:Intel 功能描述:MPU PENTIUM 4 NETBURST 64-BIT 0.13UM 2.4GHZ 478-PIN FCPGA2 - Boxed Product (Development Kits)
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*