參數資料
型號： AV80C52TXXX-20:D
廠商： ATMEL CORP
元件分類： 微控制器/微處理器
英文描述： 8-BIT, MROM, 20 MHz, MICROCONTROLLER, PQFP44
封裝： 1.40 MM HEIGHT, VQFP-44
文件頁數： 131/134頁
文件大小： 3805K
96
8068U–AVR–06/2013
XMEGA A3
Not recommended for new designs -
Use XMEGA A3U series
Problem fix/Workaround
Do not set the BOD level higher than VCC even if the BOD is not used.
11. DAC is nonlinear and inaccurate when reference is above 2.4V or VCC - 0.6V
Using the DAC with a reference voltage above 2.4V or VCC - 0.6V will give inaccurate out-
put when converting codes that give below 0.75V output:
– ±10 LSB for continuous mode
– ±200 LSB for Sample and Hold mode
Problem fix/Workaround
None.
12. DAC has increased INL or noise for some operating conditions
Some DAC configurations or operating condition will result in increased output error.
– Continous mode: ±5 LSB
– Sample and hold mode: ±15 LSB
– Sample and hold mode for reference above 2.0v: up to ±100 LSB
Problem fix/Workaround
None.
13. DAC refresh may be blocked in S/H mode
If the DAC is running in Sample and Hold (S/H) mode and conversion for one channel is
done at maximum rate (i.e. the DAC is always busy doing conversion for this channel), this
will block refresh signals to the second channel.
Problem fix/Workaround
When using the DAC in S/H mode, ensure that none of the channels is running at maximum
conversion rate, or ensure that the conversion rate of both channels is high enough to not
require refresh.
14. Conversion lost on DAC channel B in event triggered mode
If during dual channel operation channel 1 is set in auto trigged conversion mode, channel 1
conversions are occasionally lost. This means that not all data-values written to the
Channel 1 data register are converted.
Problem fix/Workaround
Keep the DAC conversion interval in the range 000-001 (1 and 3 CLK), and limit the Periph-
eral clock frequency so the conversion internal never is shorter than 1.5 s.
15. EEPROM page buffer always written when NVM DATA0 is written
If the EEPROM is memory mapped, writing to NVM DATA0 will corrupt data in the EEPROM
page buffer.
Problem fix/Workaround
Before writing to NVM DATA0, for example when doing software CRC or flash page buffer
write, check if EEPROM page buffer active loading flag (EELOAD) is set. Do not write NVM
DATA0 when EELOAD is set.
相關PDF資料
PDF描述
AT89C5131-TISIM 8-BIT, FLASH, 40 MHz, MICROCONTROLLER, PDSO28
AT89C51ED2-SLUIM 8-BIT, FLASH, 40 MHz, MICROCONTROLLER, PQCC44
ATTINY13V-12SI 8-BIT, FLASH, 12 MHz, RISC MICROCONTROLLER, PDSO8
ATAR892X-YYY-TKSI 4-BIT, MROM, 4 MHz, MICROCONTROLLER, PDSO20
AT75C221-CC-001 40 MHz, RISC PROCESSOR, PBGA256
相關代理商/技術參數
參數描述
AV810 功能描述:HOME THEATER PREMIUM SURGE 8 OUT 制造商:tripp lite 系列:- 零件狀態:有效 類型:Outlet Strip，Surge Protector 安裝類型:工作臺，地面，墻壁 電流 - 最大值:15A 使用地區:適用于北美地區 過載保護:斷路器 連接器 - AC 輸入:NEMA 5-15R 連接器 - AC 輸出:NEMA 5-15R 電壓 - 輸入:120V 外殼材料:塑料 受保護的介質線路:F 型同軸，RJ11 AC 插座:8 能量:3240J 電線長度:10'（3.05m） 認可:FCC，IC，UL 特性:- 重量:* 標準包裝:6
AV8100EVAL01 制造商:ST Ericsson 功能描述:DSI TO HDMI EVALUATION BOARD. USB CONTROLLED - Bulk 制造商:ST-Ericsson 功能描述:DSI TO HDMI EVALUATION BOARD. USB CONTROLLED - Bulk
AV8100F)R 功能描述:IC TRANSMITTER HDMI ANLG 56VFBGA 制造商:st-ericsson inc 系列:- 包裝:托盤 零件狀態:停產 類型:HDMI 發射器 應用:便攜式設備 安裝類型:表面貼裝 封裝/外殼:56-VFBGA 供應商器件封裝:56-VFBGA 標準包裝:4,860
AV8100F)RT 功能描述:IC TRANSMITTER HDMI ANLG 56VFBGA 制造商:st-ericsson inc 系列:- 包裝:帶卷（TR） 零件狀態:停產 類型:HDMI 發射器 應用:便攜式設備 安裝類型:表面貼裝 封裝/外殼:56-VFBGA 供應商器件封裝:56-VFBGA 標準包裝:2,500
AV83C151C-12 制造商:TEMIC 制造商全稱:TEMIC Semiconductors 功能描述:CMOS 0 to 36 MHz Single Chip 8-bit Microcontroller
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*