參數資料
型號: AS5130-ASST-500
廠商: ams
文件頁數: 25/33頁
文件大?。?/td> 4323K
描述: IC ENCODER ROTORY 8-BIT 16-SSOP
標準包裝: 500
傳感范圍: 32mT ~ 75mT
類型: 線性,旋轉編碼器 - 可編程
電源電壓: 4.5 V ~ 5.5 V
電流 - 電源: 24mA
輸出類型: 模擬,比率
特點: 可編程
工作溫度: -40°C ~ 125°C
封裝/外殼: *
供應商設備封裝: *
包裝: *
www.austriamicrosystems.com/AS5130
Revision 1.12
24 - 41
AS5130
Datasheet - Detailed Description
7.8.3   Polling Mode
Target of this mode is a reduction of the average power consumption. In this mode, the IC supply is pulsed, thereby reducing the average power
consumption to a fraction. The actual angle information and multi turn count value is not lost; polling mode is especially suited for battery
powered applications. The IC is furthermore capable of generating a WAKE signal as soon as the magnets position has changed, but only if the
supply of the IC is powered-on again. By means of the WAKE signal, the systems power consumption can be further decreased, if certain
modules are activated on demand.
Figure 18. External Circuitry for Polling Mode
The voltage at pin 16 (DVDD) determines whether polling mode is activated or not. Any voltage above 3.6V activates the polling functionality.
This voltage must always be present at DVDD in order to hold the information in the registers.
The procedure is as follows:
1. Initial startup: The circuit starts up with invalid trim values, which are read back from the storage registers; the command rst_otp
(command 19  10011) must be sent to read out valid trim values from the OTP.
2. These values are copied to the storage registers if OTP<8> (Wake enable) is set (must be set for polling mode).
3. The values of AGC counter, actual angle, multi turn counter, hysteresis setting, wake threshold and gain setting are continuously
updated in the storage registers.
4. The actual angle is stored as a reference by sending command STORE REF (command 3  00011). without this reference angle, a
WAKE is generated at every startup.
5. The update of the storage registers is stopped if VDD drops below 4.45V and then the information is stored (DVDD) at the next startup
(VDD on), the values are read back from the storage registers and the measured angle is compared with the stored reference angle; if
the difference between both exceeds the threshold, a WAKE pulse is generated.
DVDD
WAKE
t_on
t_off
t_wakeup
100n
+5V
>1.5K
VDD
VSS
相關PDF資料
PDF描述
AS5132-HSST-500 IC ENCODER ROTARY 20-SSOP
AS5134-ZSST-500 IC ENCODER RPTARY 20-SSOP
AS5140H-ASST IC ENCODER ROTARY 10BIT 16-SSOP
AS5145B-HSST-500 IC ENCODER ROTARY MAGN 16-SSOP
AS5510-DWLT IC ENCODER MAGNETIC LIN 6-WLCSP
相關代理商/技術參數
參數描述
AS5130ASSU 制造商:AMS 功能描述:IC MAGNETIC ROTARY ENCODER 8BIT SSOP-16 制造商:AMS 功能描述:IC, MAGNETIC ROTARY ENCODER 8BIT SSOP-16; IC Function:Encoder IC; Brief Features:360 Contactless Angular Position Encoding, Two Digital 8-bit Absolute Output; Supply Voltage Min:3V; Supply Voltage Max:5.5V; No. of Pins:16 ;RoHS Compliant: Yes
AS5130-ASSU 功能描述:IC ENCODER ROTARY 8-BIT 16-SSOP RoHS:是 類別:傳感器,轉換器 >> 磁性 - 霍爾效應,數字式開關,線性,羅盤 (IC) 系列:- 標準包裝:1 系列:- 傳感范圍:20mT ~ 80mT 類型:旋轉 電源電壓:4.5 V ~ 5.5 V 電流 - 電源:15mA 電流 - 輸出(最大):- 輸出類型:數字式,PWM,8.5 位串行 特點:可編程 工作溫度:-40°C ~ 150°C 封裝/外殼:20-SSOP(0.209",5.30mm 寬) 供應商設備封裝:20-SSOP 包裝:Digi-Reel® 其它名稱:AS5132-HSST-500DKR
AS5130ATST 制造商:AMSCO 制造商全稱:austriamicrosystems AG 功能描述:8 Bit Programmable Magnetic Rotary Encoder with Motion Detection & Multiturn
AS5130ATSU 制造商:AMSCO 制造商全稱:austriamicrosystems AG 功能描述:8 Bit Programmable Magnetic Rotary Encoder with Motion Detection & Multiturn
AS5130-SS_EK_DB 功能描述:AS5130 - Magnetic, Rotary Position Sensor Evaluation Board 制造商:ams 系列:- 零件狀態:有效 傳感器類型:磁性,旋轉位置 感應范圍:360° 接口:串行 靈敏度:- 電壓 - 電源:4.5 V ~ 5.5 V 嵌入式:- 所含物品:板 使用的 IC/零件:AS5130 標準包裝:1