- 您現在的位置：買賣IC網 > PDF目錄375269 > ADV7189BKSTZ10F (Analog Devices, Inc.) Multiformat SDTV Video Decoder PDF資料下載
參數資料
| 型號： | ADV7189BKSTZ10F |
| 廠商： | Analog Devices, Inc. |
| 英文描述： | Multiformat SDTV Video Decoder |
| 中文描述： | 標清多格式視頻解碼器 |
| 文件頁數： | 48/104頁 |
| 文件大小： | 805K |
| 代理商： | ADV7189BKSTZ10F |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁第37頁第38頁第39頁第40頁第41頁第42頁第43頁第44頁第45頁第46頁第47頁當前第48頁第49頁第50頁第51頁第52頁第53頁第54頁第55頁第56頁第57頁第58頁第59頁第60頁第61頁第62頁第63頁第64頁第65頁第66頁第67頁第68頁第69頁第70頁第71頁第72頁第73頁第74頁第75頁第76頁第77頁第78頁第79頁第80頁第81頁第82頁第83頁第84頁第85頁第86頁第87頁第88頁第89頁第90頁第91頁第92頁第93頁第94頁第95頁第96頁第97頁第98頁第99頁第100頁第101頁第102頁第103頁第104頁
ADV7189B
SYNC PROCESSING
The ADV7189B has two additional sync processing blocks that
postprocess the raw synchronization information extracted from
the digitized input video. If desired, the blocks can be disabled via
the following two I
2
C bits.
Rev. B | Page 48 of 104
ENHSPLL Enable Hsync Processor, Address 0x01[6]
The Hsync processor is designed to filter incoming Hsyncs that
have been corrupted by noise, providing improved performance
for video signals with stable time bases but poor SNR.
Setting ENHSPLL to 0 disables the Hsync processor.
Setting ENHSPLL to 1 (default) enables the Hsync processor.
ENVSPROC Enable Vsync Processor, Address 0x01[3]
This block provides extra filtering of the detected Vsyncs to give
improved vertical lock.
Setting ENVSPROC to 0
disables the Vsync processor.
Setting ENVSPROC to 1 (default) enables the Vsync processor.
VBI DATA DECODE
The following low data rate VBI signals can be decoded by the
ADV7189B:
Wide screen signaling (WSS)
Copy generation management systems (CGMS)
Closed captioning (CC)
EDTV
Gemstar 1× and 2× compatible data recovery
The presence of any of the above signals is detected and, if
applicable, a parity check is performed. The result of this
testing is contained in a confidence bit in the VBI Info[7:0]
register. Users are encouraged to first examine the VBI Info
register before reading the corresponding data registers. All
VBI data decode bits are read-only.
All VBI data registers are double-buffered with the field sig-
nals. This means that data is extracted from the video lines
and appears in the appropriate I
2
C registers with the next
field transition. They are then static until the next field.
The user should start an I
2
C read sequence with VS by first
examining the VBI Info register. Then, depending on what data
was detected, the appropriate data registers should be read.
The data registers are filled with decoded VBI data even if their
corresponding detection bits are low; it is likely that bits within
the decoded data stream are wrong.
The closed captioning data (CCAP) is available in the I
2
C
registers, and is also inserted into the output video data
stream during horizontal blanking.
The Gemstar-compatible data is not available in the I
2
C
registers, and is inserted into the data stream only during
horizontal blanking.
WSSD Wide Screen Signaling Detected, Address 0x90[0]
Logic 1 for this bit indicates the data in the WSS1 and WSS2
registers is valid.
The WSSD bit goes high if the rising edge of the start bit is
detected within a time window, and if the polarity of the parity
bit matches the transmitted data.
When WSSD is 0, no WSS is detected and confidence in the
decoded data is low.
When WSSD is 1, WSS is detected and confidence in the
decoded data is high.
CCAPD Closed Caption Detected, Address 0x90[1]
Logic 1 for this bit indicates the data in the CCAP1 and CCAP2
registers is valid.
The CCAPD bit goes high if the rising edge of the start bit is
detected within a time window, and if the polarity of the parity
bit matches the transmitted data.
When CCAPD is 0, no CCAP signals are detected and
confidence in the decoded data is low.
When CCAPD is 1, the CCAP sequence is detected and
confidence in the decoded data is high.
EDTVD EDTV Sequence Detected, Address 0x90[2]
Logic 1 for this bit indicates the data in the EDTV1, 2, 3
registers is valid.
The EDTVD bit goes high if the rising edge of the start bit is
detected within a time window, and if the polarity of the parity
bit matches the transmitted data.
When EDTVD is 0, no EDTV sequence is detected. Confidence
in decoded data is low.
When EDTVD is 1, an EDTV sequence is detected. Confidence
in decoded data is high.
CGMSD CGMS-A Sequence Detected, Address 0x90[3]
Logic 1 for this bit indicates the data in the CGMS1, 2, 3
registers is valid. The CGMSD bit goes high if a valid CRC
checksum has been calculated from a received CGMS packet.
When CGMSD is 0, no CGMS transmission is detected and
confidence in the decoded data is low.
When CGMSD is 1, the CGMS sequence is decoded and
confidence in the decoded data is high.
相關PDF資料 |
PDF描述 |
|---|---|
| ADV7189 | Multiformat SDTV Video Decoder |
| ADV7189KST | Multiformat SDTV Video Decoder |
| ADV7195 | Multiformat Progressive Scan/HDTV Encoder with Three 11-Bit DACs and 10-Bit Data Input |
| ADV7195KST | Multiformat Progressive Scan/HDTV Encoder with Three 11-Bit DACs and 10-Bit Data Input |
| ADV7196 | Multiformat Progressive Scan/HDTV Encoder with Three 11-Bit DACs, 10-Bit Data Input, and Macrovision |
相關代理商/技術參數 |
參數描述 |
|---|---|
| ADV7189BKSTZ10F2 | 制造商:AD 制造商全稱:Analog Devices 功能描述:Multiformat SDTV Video Decoder |
| ADV7189BST | 制造商:Analog Devices 功能描述: |
| ADV7189KST | 制造商:Rochester Electronics LLC 功能描述:12BIT NTSC/PAL/SECAMVIDDECOD I.C. - Tape and Reel 制造商:Analog Devices 功能描述:IC VIDEO ENCODER |
| ADV7189XST | 制造商:Analog Devices 功能描述:54MHZ NTSC/PAL ENCODER(DNR+MACROVISON)IC - Bulk |
| ADV7189XST-X2 | 制造商:Analog Devices 功能描述:54MHZ NTSC/PAL ENCODER(DNR+MACROVISON)IC - Bulk |
發布緊急采購，3分鐘左右您將得到回復。