參數資料
型號: ADV7180
廠商: Analog Devices, Inc.
英文描述: 10-Bit, 4 x Oversampling SDTV Video Decoder
中文描述: 10位,4個采樣標清視頻解碼器
文件頁數: 71/112頁
文件大?。?/td> 1320K
代理商: ADV7180
ADV7180
Letterbox Detection
Incoming video signals may conform to different aspect ratios
(16:9 wide screen or 4:3 standard). For certain transmissions in
the wide-screen format, a digital sequence (WSS) is transmitted
with the video signal. If a WSS sequence is provided, the aspect
ratio of the video can be derived from the digitally decoded bits
that WSS contains.
In the absence of a WSS sequence, letterbox detection can be
used to find wide-screen signals. The detection algorithm
examines the active video content of lines at the start and end of
a field. If black lines are detected, this may indicate that the
currently shown picture is in wide-screen format.
The active video content (luminance magnitude) over a line of
video is summed together. At the end of a line, this accumulated
value is compared with a threshold, and a decision is made as to
whether or not a particular line is black. The threshold value
needed may depend on the type of input signal; some control is
provided via LB_TH[4:0].
Detection at the Start of a Field
The ADV7180 expects a section of at least six consecutive black
lines of video at the top of a field. Once those lines are detected,
Register LB_LCT[7:0] reports the number of black lines that
were actually found. By default, the ADV7180 starts looking for
those black lines in sync with the beginning of active video, for
example, immediately after the last VBI video line. LB_SL[3:0]
allows the user to set the start of letterbox detection from the
beginning of a frame on a line-by-line basis. The detection
window closes in the middle of the field.
Detection at the End of a Field
The ADV7180 expects at least six continuous lines of black video
at the bottom of a field before reporting the number of lines
actually found via the LB_LCB[7:0] value. The activity window
for letterbox detection (end of field) starts in the middle of an
active field. Its end is programmable via LB_EL[3:0].
Detection at the Midrange
Some transmissions of wide-screen video include subtitles
within the lower black box. If the ADV7180 finds at least two
black lines followed by some more nonblack video, for example,
the subtitle followed by the remainder of the bottom black
block, it reports a midcount via LB_LCM[7:0]. If no subtitles are
found, LB_LCM[7:0] reports the same number as LB_LCB[7:0].
There is a 2-field delay in reporting any line count parameter.
Rev. A | Page 71 of 112
There is no letterbox detected bit. Read the LB_LCT[7:0] and
LB_LCB[7:0] register values to determine whether or not the
letterbox-type video is present in software.
LB_LCT[7:0], Letterbox Line Count Top, Address 0x9B
[7:0]; LB_LCM[7:0], Letterbox Line Count Mid,
Address 0x9C [7:0]; LB_LCB[7:0], Letterbox Line Count
Bottom, Address 0x9D [7:0]
Table 94. LB_LCx Access Information
Signal Name
LB_LCT[7:0]
LB_LCM[7:0]
LB_LCB[7:0]
Address
0x9B
0x9C
0x9D
LB_TH[4:0], Letterbox Threshold Control,
Address 0xDC [4:0]
Table 95. LB_TH Function
LB_TH[4:0]
01100 (default)
01101 to 10000
Description
Default threshold for detection of black lines.
Increase threshold (need larger active video
content before identifying nonblack lines).
Decrease threshold (even small noise levels
can cause the detection of nonblack lines).
00000 to 01011
LB_SL[3:0], Letterbox Start Line, Address 0xDD [7:4]
The LB_SL[3:0] bits are set at 0100 by default. For an NTSC
signal, this window is from Line 23 to Line 286.
By changing the bits to 0101, the detection window starts on
Line 24 and ends on Line 287.
LB_EL[3:0], Letterbox End Line, Address 0xDD [3:0]
The LB_EL[3:0] bits are set at 1101 by default. This means that the
letterbox detection window ends with the last active video line.
For an NTSC signal, this window is from Line 262 to Line 525.
By changing the bits to 1100, the detection window starts on
Line 261 and ends on Line 254.
相關PDF資料
PDF描述
ADV7180BCPZ 10-Bit, 4 x Oversampling SDTV Video Decoder
ADV7180BSTZ 10-Bit, 4 x Oversampling SDTV Video Decoder
ADV7181 Multiformat SDTV Video Decoder
ADV7181B Multiformat SDTV Video Decoder
ADV7181BBCPZ Multiformat SDTV Video Decoder
相關代理商/技術參數
參數描述
ADV7180_12 制造商:AD 制造商全稱:Analog Devices 功能描述:10-Bit, 4?? Oversampling SDTV Video Decoder
ADV7180BCP32Z 制造商:Analog Devices 功能描述:10-BIT, 4? OVERSAMPLING SDTV VIDEO DECODER - Trays
ADV7180BCP32Z-RL 制造商:Analog Devices 功能描述:IC
ADV7180BCPZ 功能描述:IC VIDEO DECODER SDTV 40-LFCSP RoHS:是 類別:集成電路 (IC) >> 線性 - 視頻處理 系列:- 標準包裝:250 系列:- 類型:電平移位器 應用:LCD 電視機/監控器 安裝類型:表面貼裝 封裝/外殼:28-WFQFN 裸露焊盤 供應商設備封裝:28-WQFN(4x4)裸露焊盤 包裝:帶卷 (TR) 其它名稱:296-32523-2TPS65198RUYT-ND
ADV7180BCPZ 制造商:Analog Devices 功能描述:IC VIDEO DECODER 10BIT 57.27MSPS LFCSP40