參數資料
型號： 935268282151
廠商： NXP SEMICONDUCTORS
元件分類： 微控制器/微處理器
英文描述： 2 CHANNEL(S), 400M bps, SERIAL COMM CONTROLLER, PQFP64
封裝： 10 X 10 MM, 1.40 MM HEIGHT, PLASTIC, MS-026, SOT-314-2, LQFP-64
文件頁數： 32/42頁
文件大?。?/td> 218K
代理商： 935268282151
Philips Semiconductors
Preliminary data
PDI1394P23
2-port/1-port 400 Mbps physical layer interface
2001 Sep 06
38
The sequence of events for initialization of the PHY-LLC interface
when the interface is in the differentiated mode of operation (ISO
terminal is low) is as follows:
1. LPS reasserted. After the interface has been in the reset or
disabled state for at least the minimum TRESTORE time, the LLC
causes the interface to be initialized and restored to normal
operation by re-activating the LPS signal. (In the above diagram,
the interface is shown in the disabled state with SYSCLK
high-impedance inactive. However, the interface initialization
sequence described here is also executed if the interface is
merely reset but not yet disabled.)
2. SYSCLK activated. If the interface is disabled, the PHY
re-activates its SYSCLK output when it detects that LPS has
been reasserted. SYSCLK will be restored within 60 ns. The
PHY commences SYSCLK activity by driving the SYSCLK
output low for half a cycle. Thereafter, the SYSCLK output is a
50% duty cycle square wave with a frequency of 49.152 MHz
+100 ppm (period of 20.345 ns). Upon the first full cycle of
SYSCLK, the PHY drives the CTL and D terminals low for one
cycle. The LLC is also required to drive its CTL, D, and LREQ
outputs low during one of the first six cycles of SYSCLK (in the
above diagram, this is shown as occurring in the first SYSCLK
cycle).
3. Receive indicated. Upon the eighth SYSCLK cycle following
reassertion of LPS, the PHY asserts the Receive state on the
CTL lines and the data-on indication (all ones) on the D lines for
one or more cycles (because the interface is in the differentiated
mode of operation, the CTL and D lines will be in the
high-impedance state after the first cycle).
4. Initialization complete. The PHY asserts the Idle state on the
CTL lines and logic 0 on the D lines. This indicates that the
PHY-LLC interface initialization is complete and normal
operation may commence. The PHY will now accept requests
from the LLC via the LREQ line.
TCLK_ACTIVATE
CTL0
LPS
SV01815
ISO
SYSCLK
D0 – D7
LREQ
(high)
(c)
7 cycles
(b)
CTL1
(a)
Figure 25.
Interface Initialization, ISO High
The sequence of events for initialization of the PHY-LLC interface
when the interface is in the non-differentiated mode of operation
(ISO terminal is high) is as follows:
1. LPS reasserted. After the interface has been in the reset or
disabled state for at least the minimum TRESTORE time, the LLC
causes the interface to be initialized and restored to normal
operation by reasserting the LPS signal. (In the above diagram,
the interface is shown in the disabled state with SYSCLK low
inactive. However, the interface initialization sequence described
here is also executed if the interface is merely reset but not yet
disabled.)
2. SYSCLK activated. If the interface is disabled, the PHY
re-activates its SYSCLK output when it detects that LPS has
been reasserted. SYSCLK will be restored within 60 ns. The
SYSCLK output is a 50% duty cycle square wave with a
frequency of 49.152 MHz +100 ppm (period of 20.345 ns).
During the first seven cycles of SYSCLK, the PHY continues to
drive the CTL and D terminals low. The LLC is also required to
drive its CTL and D outputs low for one of the first six cycles of
SYSCLK but to otherwise place its CTL and D outputs in a
high-impedance state. The LLC continues to drive its LREQ
output low during this time.
3. Receive indicated. Upon the eighth SYSCLK cycle following
reassertion of LPS, the PHY asserts the Receive state on the
CTL lines and the data-on indication (all ones) on the D lines for
one or more cycles.
4. Initialization complete. The PHY asserts the Idle state on the
CTL lines and logic 0 on the D lines. This indicates that the
PHY-LLC interface initialization is complete and normal
operation may commence. The PHY will now accept requests
from the LLC via the LREQ line.
相關PDF資料
PDF描述
080155R0 TELEFON-AKKU
935268378118 LVC/LCX/Z SERIES, 2-INPUT NAND GATE, PDSO5
935268378125 LVC/LCX/Z SERIES, 2-INPUT NAND GATE, PDSO5
935268380115 LVC/LCX/Z SERIES, 2-INPUT AND GATE, PDSO5
935268380125 LVC/LCX/Z SERIES, 2-INPUT AND GATE, PDSO5
相關代理商/技術參數
參數描述
935268721125 制造商:NXP Semiconductors 功能描述:Buffer/Line Driver 1-CH Non-Inverting 3-ST CMOS 5-Pin TSSOP T/R
935269304128 制造商:ST-Ericsson 功能描述:IC AUDIO CODEC W/TCH SCRN 48LQFP
935269544557 制造商:NXP Semiconductors 功能描述:SUB ONLY TDA9587-2US1-V1.3
935269987557 制造商:NXP Semiconductors 功能描述:SUB ONLY TDA9587-1US1-V1.8 SUBBED TO 935269987557
935270713557 制造商:NXP Semiconductors 功能描述:SUB ONLY IC CHP
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*