![](http://datasheet.mmic.net.cn/340000/82562G_datasheet_16452411/82562G_1.png)
82562G 10/100 Mbps Platform LAN
Connect (PLC)
Networking Silicon
Datasheet
Product Features
1
This device is lead-free. That is, lead has not been intentionally added, but lead may still exist
as an impurity at <1000 ppm. The Material Declaration Data Sheet, which includes lead
impurity levels and the concentration of other Restriction on Hazardous Substances (RoHS)-
banned materials, is available at:
ftp://download.intel.com/design/packtech/material_content_IC_Package.pdf#pagemode=bookmarks
In addition, this device has been tested and conforms to the same parametric specifications as
previous versions of the device.
For more information regarding lead-free products from Intel Corporation, contact your Intel
Field Sales representative.
Additional Features
■
The 82562G PLC supports drop-in replacement with the 82562ET. If it is not used as a drop-
in replacement, strapping options enable new operating modes:
—LED support for three logic configurations.
—LAN disable function using one pin.
—Increased transmit strength.
■
The receive BER performance increases the margin for cable length.
■
Return Loss performance is improved.
■
IEEE 802.3 10BASE-T/100BASE-TX
compliant physical layer interface
■
IEEE 802.3u Auto-Negotiation support
■
Digital Adaptive Equalization control
■
Link status interrupt capability
■
XOR tree mode support
■
3-port LED support (speed, link and
activity)
■
10BASE-T auto-polarity correction
■
LAN Connect Interface
■
Diagnostic loopback mode
■
1:1 transmit transformer ratio support
■
Low power (less than 300 mW in active
transmit mode)
■
Reduced power in “unplugged mode” (less
than 50 mW)
■
Automatic detection of “unplugged mode”
■
3.3 V device
■
Lead-free
1
48-pin Shrink Small Outline
Package for both leaded and lead-free
designs. (Devices that are lead-free are
marked with a circled “e3” and have the
product code prefix: LUxxxxxx).
Revision 1.3
April 2005