參數資料
型號: 24C02SC
廠商: Microchip Technology Inc.
英文描述: 2K 5.0V IIC serial EEPROMs(2.5V~5.5V,2K位,1M次擦寫周期,ISO7816標準)
中文描述: 2K 5.0V國際進口電壓(2.5V?5.5V的和2K位,100萬次擦寫周期,符合ISO7816標準串行EEPROM)
文件頁數: 93/170頁
文件大小: 4191K
代理商: 24C02SC
2003 Microchip Technology Inc.
Preliminary
DS40300C-page 91
PIC16F62X
14.0
SPECIAL FEATURES OF THE
CPU
Special circuits to deal with the needs of real-time
applications are what sets a microcontroller apart from
other processors. The PIC16F62X family has a host of
such features intended to maximize system reliability,
minimize cost through elimination of external
components, provide power saving Operating modes
and offer code protection.
These are:
1.
OSC selection
2.
RESET
3.
Power-on Reset (POR)
4.
Power-up Timer (PWRT)
5.
Oscillator Start-Up Timer (OST)
6.
Brown-out Reset (BOD)
7.
Interrupts
8.
Watchdog Timer (WDT)
9.
SLEEP
10. Code protection
11. ID Locations
12. In-circuit Serial Programming
The PIC16F62X has a Watchdog Timer which is
controlled by configuration bits. It runs off its own RC
oscillator for added reliability. There are two timers that
offer necessary delays on power-up. One is the
Oscillator Start-up Timer (OST), intended to keep the
chip in RESET until the crystal oscillator is stable. The
other is the Power-up Timer (PWRT), which provides a
fixed delay of 72 ms (nominal) on power-up only,
designed to keep the part in RESET while the power
supply stabilizes. There is also circuitry to RESET the
device if a Brown-out occurs, which provides at least a
72 ms RESET. With these three functions on-chip,
most applications need no external RESET circuitry.
The SLEEP mode is designed to offer a very low
current Power-down mode. The user can wake-up from
SLEEP through external RESET, Watchdog Timer
wake-up or through an interrupt. Several oscillator
options are also made available to allow the part to fit
the application. The ER oscillator option saves system
cost while the LP crystal option saves power. A set of
configuration bits are used to select various options.
14.1
Configuration Bits
The configuration bits can be programmed (read as '0')
or left unprogrammed (read as '1') to select various
device configurations. These bits are mapped in
program memory location 2007h.
The user will note that address 2007h is beyond
the user program memory space. In fact, it belongs
to the special configuration memory space (2000h –
3FFFh), which can be accessed only during
programming. See Programming Specification.
相關PDF資料
PDF描述
24C02A 2K 5.0V CMOS serial EEPROMs(2K位,5.0V,IIC串行EEPROM)
24C02C 2K 5.0V IIC serial EEPROMs(2K位,1M次擦寫周期,硬件寫保護,二線串行接口,EEPROM)
24C02C-EP 2K 5.0V I 2 C ⑩ Serial EEPROM
24C02C-ESN 2K 5.0V I 2 C ⑩ Serial EEPROM
24C02C-EST 2K 5.0V I 2 C ⑩ Serial EEPROM
相關代理商/技術參數
參數描述
24C02SC/S 制造商:未知廠家 制造商全稱:未知廠家 功能描述:SERIAL EEPROM|256X8|CMOS|DIE
24C02SC-/S 制造商:MICROCHIP 制造商全稱:Microchip Technology 功能描述:1K/2K 5.0V I2C Serial EEPROMs for Smart Cards
24C02SC/S08 制造商:未知廠家 制造商全稱:未知廠家 功能描述:SERIAL EEPROM|256X8|CMOS|DIE
24C02SC-/S08 制造商:MICROCHIP 制造商全稱:Microchip Technology 功能描述:1K/2K 5.0V I2C Serial EEPROMs for Smart Cards
24C02SC/W 制造商:未知廠家 制造商全稱:未知廠家 功能描述:SERIAL EEPROM|256X8|CMOS|WAFER