參數資料
型號: UPD72850AGK-9EU
廠商: NEC Corp.
元件分類: 圓形連接器
英文描述: Circular Connector; No. of Contacts:56; Series:MS27467; Body Material:Aluminum; Connecting Termination:Crimp; Connector Shell Size:25; Circular Contact Gender:Pin; Circular Shell Style:Straight Plug; Insert Arrangement:25-4 RoHS Compliant: No
中文描述: IEEE1394連接400Mbps的物理層
文件頁數: 33/48頁
文件大?。?/td> 290K
代理商: UPD72850AGK-9EU
Data Sheet S14452EJ1V0DS00
33
μ
PD72850A
5. CABLE PHY PACKET
The node on the serial bus transmits and receives the PHY packet to control the bus.
The PHY packet is composed of 2 quadlets (64-bit); the second quadlet (32-bit) contains the inverse value of the
first quadlet.
The PHY packet is transmitted at a transfer rate of S100. All of the PHY packets received from the serial bus are
transmitted to the Link.
Though the PHY packet from the
μ
PD72850A is transmitted to the Link, the PHY packet which was transmitted
from the Link of the node is not transmitted to the Link.
There are four types of PHY packets, as follows:
Self_ID packet
Link-on packet
PHY configuration packet
Extended PHY packet
The Self_ID packet transmitted automatically by the
μ
PD72850A is also transmitted to the Link of a local node.
The
μ
PD72850A PHY packet Receive from the serial bus operates similar to the PHY packet transmitted by the
Link (when the packet transmission to the Link is executed).
5.1 Self_ID Packet
During the Self_ID phase of the initialization or when the Ping packet responds, the
μ
PD72850A transmits the
Self_ID packet.
Figure 5-1. Self_ID Packet Format
10
phy_ID
0
L
gap_cnt
sp
rsv
c
pwr
p0
p1
p2
i
m
Logical Inverse of the first quadlet
Table 5-1. Self_ID Packet
Field
Description
phy_ID
Physical ID of the node.
L
Logical product of Link_active and LPS in the PHY register.
gap_cnt
Gap_count value in the PHY register.
sp
Physpeed 10 (corresponds to 98.304, 196.608, 393.216 Mbps).
c
C bit values in the PHY register.
pwr
pwr value in the PHY register.
000: The node does not need the power supply. No power repeat.
001: Obtains power supply for the node. Can supply 15W or more.
010: Obtains power supply for the node. Can supply 30W or more.
011: Obtains power supply for the node. Can supply 45W or more.
100: The node consumes 3W maximum power.
110: The node consumes 3W maximum power. At least 3W are necessary to enable Link.
111: The node consumes 3W maximum power. At least 7W are necessary to enable Link.
i
It shows that the node issued Bus Reset and the bus was reset.
m
Read as 0.
rsv
Read as 00.
相關PDF資料
PDF描述
uPD750066CU 4-BIT SINGLE-CHIP MICROCONTROLLERS
uPD750068GT 4-BIT SINGLE-CHIP MICROCONTROLLERS
uPD750068GTA 4-BIT SINGLE-CHIP MICROCONTROLLERS
uPD750066GTA CONNECTOR ACCESSORY
UPD750064 4-BIT SINGLE-CHIP MICROCONTROLLERS
相關代理商/技術參數
參數描述
UPD74HC04C 制造商:Panasonic Industrial Company 功能描述:IC
UPD750068GT-396 制造商:Renesas Electronics Corporation 功能描述:
UPD7507C189 制造商:Panasonic Industrial Company 功能描述:IC
UPD7508CU265 制造商:Panasonic Industrial Company 功能描述:IC
UPD75208 制造商:Panasonic Industrial Company 功能描述:IC