參數資料
型號： T491C474M035AS
廠商： KEMET Corporation
英文描述： Surface Mount Capacitors
中文描述： 表面貼裝電容
文件頁數： 14/100頁
文件大小： 4351K
代理商： T491C474M035AS
KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
SOLID TANTALUM CHIP CAPACITORS
12
TANTALUM MnO
2
COMPONENT PERFORMANCE CHARACTERISTICS
(con’t.)
20. Surge Current
All conventional reliability testing is conducted
under steady-state DC voltage. Experience indi-
cates that AC ripple, within the limits prescribed,
has little effect on failure rate. Heavy surge cur-
rents are possible in some applications, howev-
er. Circuit impedance may be very low (below the
recommended 0.1 ohm/volt) or there may be dri-
ving inductance to cause voltage “ringing.” Surge
current may appear during turn-on of equipment,
for example. Failure rate under current-surge
conditions may not be predictable from conven-
tional life test data.
Capacitors are capable of withstanding a 4 ±1
second charge of rated voltage (±2%) through a
total circuit resistance (excluding the capacitor) of
1 ±0.2 ohms at +25°C, followed by a 4 ±1 second
discharge to a voltage below 1% of the rated volt-
age. This cycle is repeated consecutively three
(3) times. Post test performance:
a. Capacitance — within ±5% of initial value
b. DC Leakage — within initial limit
c. Dissipation Factor — within initial limit
100% production surge current testing is per-
formed on all Tantalum Chip series for case sizes
C, D, E, X, U, V. The total test circuit resistance
is
≤
0.5 ohms. The applied voltage is 75% of
rated voltage for all series except the T495 and
T510 which are surged at 100% of rated voltage.
Four surge cycles are applied. Parts not capable
of surviving this test are removed at subsequent
electrical screening. See T493 Series on page 22
for specific surge options.
21. Storage Life Test
2,000 hours, +125 C, Unbiased, Mounted
Post Test Performance:
a. Capacitance — within ±10% of initial value
b. DC Leakage — within initial limit
c. Dissipation Factor — within initial limit
d. ESR — within initial limit
e. Physical — no degradation of function
22. Standard Life Test
2,000 hours, +85 C, Rated Voltage, Mounted
Post Test Performance:
a. Capacitance — within ±10% of initial value
b. DC Leakage — within 125% of initial limit
c. Dissipation Factor — within initial limit
d. ESR — within initial limit
e. Physical — no degradation of function
23. High Temperature Life Test
2,000 hours, +125 C, 2/3 Rated Voltage,
Mounted
Post Test Performance:
a. Capacitance — within ±10% of initial value
b. DC Leakage — within 125% of initial limit
c. Dissipation Factor — within initial limit
d. ESR — within initial limit
e. Physical — no degradation of function
MECHANICAL
24. Resistance to Solvents
Mil-Std-202, Method 215
Post Test Performance:
a. Capacitance — within ±10% of initial value
b. DC Leakage — within initial limit
c. Dissipation Factor -— within initial limit
d. Physical — no degradation of case, termi-
nals or marking.
25. Fungus
Mil-Std-810, Method 508
26. Flammability
UL94 VO Classification
Encapsulant materials meet this
classification.
27. Resistance to Soldering Heat
Wave Solder
+260 ±5 C, 10 Seconds
Infrared Reflow
+230 ±5 C, 30 Seconds
Vapor Phase Reflow
+215 ±5 C, 2 minutes
Post Test Performance:
a. Capacitance — within ±10% of Initial Value
b. DC Leakage — within Initial Limit
c. Dissipation Factor — within Initial Limit
28. Solderability
Mil-Std-202, Method 208
ANSI/J-STD-002, Test B
Applies to Solder and Tin Coated terminations
only. Does not apply to optional gold-plated ter-
minations.
29. Vibration
Mil-Std-202, Method 204, Condition D,
10 Hz to 2,000 Hz, 20G Peak
Post Test Performance:
a. Capacitance — within ± 10% of initial value
b. DC Leakage — within initial limit
c. Dissipation Factor — within initial limit
30. Shock
Mil-Std-202, Method 213, Condition I,
100 G Peak
Post Test Performance:
a. Capacitance — within ±10% of initial value
b. DC Leakage — within initial limit
c. Dissipation Factor — within initial limit
31. Terminal Strength
Pull Force
One Pound (454 grams), 30 Seconds
相關PDF資料
PDF描述
T491C474M035AT Surface Mount Capacitors
T491D104K035AG Surface Mount Capacitors
T491D104K035AH Surface Mount Capacitors
T491D104K035AS Surface Mount Capacitors
T491D104K035AT Surface Mount Capacitors
相關代理商/技術參數
參數描述
T491C474M035AT 制造商:KEMET 制造商全稱:Kemet Corporation 功能描述:Surface Mount Capacitors
T491C474M050AT 功能描述:鉭質電容器-固體SMD 50volts 0.47uF 20% RoHS:否 制造商:AVX 電容:100 uF 電壓額定值:20 V ESR: 容差:10 % 外殼代碼 - in:2917 外殼代碼 - mm:7343 高度:4.1 mm 制造商庫存號:E Case 工作溫度范圍:- 55 C to + 125 C 系列:TBM 產品:Tantalum Solid Low ESR Commercial Grade 封裝:Bulk
T491C474M050AT4394 制造商:KEMET Corporation 功能描述:.470UF 50.0V - Boxed Product (Development Kits)
T491C474M050ZT 功能描述:鉭質電容器-固體SMD .470UF 50.0V RoHS:否 制造商:AVX 電容:100 uF 電壓額定值:20 V ESR: 容差:10 % 外殼代碼 - in:2917 外殼代碼 - mm:7343 高度:4.1 mm 制造商庫存號:E Case 工作溫度范圍:- 55 C to + 125 C 系列:TBM 產品:Tantalum Solid Low ESR Commercial Grade 封裝:Bulk
T491C474M050ZT7280 制造商:KEMET Corporation 功能描述:Cap Tant Solid 0.47uF 50V C CASE 20% (6 X 3.2 X 2.5mm) SMD 6032-28 125
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*