參數資料
型號： SC16IS740IPW
廠商： NXP Semiconductors N.V.
元件分類： 連接器件
英文描述： Single UART with I2C-bus-SPI interface, 64 bytes of transmit and receive FIFOs, IrDA SIR built-in support
封裝： SC16IS740IPW/Q900<SOT403-1 (TSSOP16)|<<http://www.nxp.com/packages/SOT403-1.html<1<Always Pb-free,;SC16IS740IPW<SOT403-1 (TSSOP16)|<<http://www.nxp.com/packages/SOT403-1.
文件頁數： 28/62頁
文件大小： 308K
代理商： SC16IS740IPW
SC16IS740_750_760_6
NXP B.V. 2008. All rights reserved.
Product data sheet
Rev. 06 — 13 May 2008
28 of 62
NXP Semiconductors
SC16IS740/750/760
Single UART with I
2
C-bus/SPI interface, 64-byte FIFOs, IrDA SIR
8.7 Modem Status Register (MSR)
This 8-bit register provides information about the current state of the control lines from the
modem, data set, or peripheral device to the host. It also indicates when a control input
from the modem changes state.
Table 18
shows Modem Status Register bit settings.
[1]
Only available on SC16IS750/SC16IS760.
Remark:
The primary inputs RI, CD, CTS, DSR are all active LOW.
Table 18.
Bit
7
Modem Status Register bits description
Symbol
Description
MSR[7]
CD
[1]
(active HIGH, logical 1). If GPIO6 is selected as CD modem pin
through IOControl register bit 1, the state of CD pin can be read from this
bit. This bit is the complement of the CD input. Reading IOState bit 6 does
not reflect the true state of CD pin.
MSR[6]
RI
[1]
(active HIGH, logical 1). If GPIO7 is selected as RI modem pin through
IOControl register bit 1, the state of RI pin can be read from this bit. This bit
is the complement of the RI input. Reading IOState bit 6 does not reflect the
true state of RI pin.
MSR[5]
DSR
[1]
(active HIGH, logical 1). If GPIO4 is selected as DSR modem pin
through IOControl register bit 1, the state of DSR pin can be read from this
bit. This bit is the complement of the DSR input. Reading IOState bit 4 does
not reflect the true state of DSR pin.
MSR[4]
CTS (active HIGH, logical 1). This bit is the complement of the CTS input.
MSR[3]
CD
[1]
. Indicates that CD input has changed state. Cleared on a read.
MSR[2]
RI
[1]
. Indicates that RI input has changed state from LOW to HIGH.
Cleared on a read.
MSR[1]
DSR
[1]
. Indicates that DSR input has changed state. Cleared on a read.
MSR[0]
CTS. Indicates that CTS input has changed state. Cleared on a read.
6
5
4
3
2
1
0
相關PDF資料
PDF描述
SC16IS750IBS Single UART with I2C-bus-SPI interface, 64 bytes of transmit and receive FIFOs, IrDA SIR built-in support
SC16IS750IPW Single UART with I2C-bus-SPI interface, 64 bytes of transmit and receive FIFOs, IrDA SIR built-in support
SC16IS760IBS Single UART with I2C-bus-SPI interface, 64 bytes of transmit and receive FIFOs, IrDA SIR built-in support
SC16IS760IPW Single UART with I2C-bus-SPI interface, 64 bytes of transmit and receive FIFOs, IrDA SIR built-in support
SC16IS741IPW Single UART with I2C-bus-SPI interface, 64 bytes of transmit and receive FIFOs, IrDA SIR built-in support
相關代理商/技術參數
參數描述
SC16IS740IPW,112 功能描述:UART 接口集成電路 UART SINGLE W/FIFO RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
SC16IS740IPW,128 功能描述:UART 接口集成電路 I2C/SPI-SLAVEBRIDGE RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
SC16IS740IPW/Q900, 功能描述:UART 接口集成電路 I2C/SPI-UART BRIDGE W/IRDA RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
SC16IS740IPW/Q900,128 制造商:NXP Semiconductors 功能描述:0
SC16IS740IPW112 制造商:NXP Semiconductors 功能描述:IC SINGLE UART FIFO 5MBPS 3.6V TSSOP-16 制造商:NXP Semiconductors 功能描述:IC UART FIFO 5MBPS 3.6V 16TSSOP
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*