參數資料
型號： SAA567X
廠商： NXP Semiconductors N.V.
英文描述： Enhanced TV microcontrollers with On-Screen Display (OSD)
中文描述： 與微控制器在強化電視屏幕顯示（OSD）
文件頁數： 25/116頁
文件大小： 532K
代理商： SAA567X
2002 May 06
25
Philips Semiconductors
Objective specification
Enhanced TV microcontrollers with
On-Screen Display (OSD)
SAA567x; SAA569x
Timer/counter Control Register (TCON)
TF1
Timer 1 overflow flag:
Set by hardware on Timer/counter overflow. Cleared by
hardware when processor vectors to interrupt routine.
Timer 1 run control bit:
Set/cleared by software to turn Timer/counter on/off.
Timer 0 overflow flag:
Set by hardware on Timer/counter overflow. Cleared by
hardware when processor vectors to interrupt routine.
Timer 0 run control bit:
Set/cleared by software to turn Timer/counter on/off.
Interrupt 1 edge flag.
Both edges generate flag. Set by hardware when external
interrupt edge detected. Cleared by hardware when interrupt processed.
Interrupt 1 type control bit:
Set/cleared by software to specify edge/low level
triggered external interrupts.
Interrupt 0 Edge l flag:
Set by hardware when external interrupt edge detected.
Cleared by hardware when interrupt processed.
Interrupt 0 type flag:
Set/cleared by software to specify falling edge/low level
triggered external interrupts.
TR1
TF0
TR0
IE1
IT1
IE0
IT0
Timer/counter2 Control Register (T2CON)
TF2
Timer 2 overflow flag:
Cleared by software. TF2 will not be set when either
baud rate generation mode or clock out mode.
Timer 2 External Flag:
Set on a negative transition on T2EX and EXEN2 = 1. In
Auto-reload mode it is toggled on an under or overflow. Cleared by software.
Receive clock 0 flag:
When set, causes the UART to use Timer 2 overflow
pulses. RCLK0 = 0 causes Timer 1 overflow pulses to be used.
Transmit clock 0 flag:
When set, causes the UART to use Timer 2 overflow
pulses. TCLK0 = 0 causes Timer 1 overflow pulses to be used.
Timer 2 external enable flag:
when set, allows a capture or reload to occur,
together with an interrupt, as a result of a negative transition on input T2EX if in
capture mode or Auto-reload mode with DCEN reset. If in Auto-reload mode and
DCEN is set, this bit has no influence. In the other modes, EXF2 is set and an
interrupt is generated on a HIGH-to-LOW transition on T2EX pin. In all modes,
EXEN2 = 0 causes Timer 2 to ignore events at T2EX.
START/STOP control bit:
a logic 1 starts Timer 2
Counter Timer selection bit:
a logic 1 selects the counter for Timer 2
Capture/Reload flag:
selection of mode capture or reload
EXF2
RCLK0
TCLK0
EXEN2
TR2
C/T2
CP/RL2
14-bit PWM MSB Register (TDACH)
TPWE
TD13 to TD8
activate this 14-bit PWM (logic 1)
6 MSBs of 14-bit number to be output by the 14-bit PWM
14-bit PWM LSB Register (TDACL)
TD7 to TD0
8 LSBs of 14-bit number to be output by the 14-bit PWM
Timer 0 High byte (TH0)
TH07 to TH00
8 MSBs of Timer 0 16-bit counter
BITS
FUNCTION
相關PDF資料
PDF描述
SAA5695HL Enhanced TV microcontrollers with On-Screen Display (OSD)
SAA569x Enhanced TV microcontrollers with On-Screen Display (OSD)
SAA5677HL Enhanced TV microcontrollers with On-Screen Display (OSD)
SAA5700GP Chinese Character System Teletext CCST decoder
SAA5700 Chinese Character System Teletext CCST decoder
相關代理商/技術參數
參數描述
SAA5695HL 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Enhanced TV microcontrollers with On-Screen Display (OSD)
SAA5697HL 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Enhanced TV microcontrollers with On-Screen Display (OSD)
SAA569X 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Enhanced TV microcontrollers with On-Screen Display (OSD)
SAA5700 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Chinese Character System Teletext CCST decoder
SAA5700GP 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Chinese Character System Teletext CCST decoder
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*