700
32072H–AVR32–10/2012
AT32UC3A3
27.8.2.11
Endpoint n Status Register
Register Name:
UESTAn, n in [0..7]
Access Type:
Read-Only 0x0100
Offset:
0x0130 + (n * 0x04)
Reset Value:
0x00000100
BYCT: Byte Count
This field is set with the byte count of the FIFO.
For IN endpoints, incremented after each byte written by the software into the endpoint and decremented after each byte sent to
the host.
For OUT endpoints, incremented after each byte received from the host and decremented after each byte read by the software
from the endpoint.
This field may be updated one clock cycle after the RWALL bit changes, so the user should not poll this field as an interrupt bit.
CFGOK: Configuration OK Status
This bit is updated when the ALLOC bit is written to one.
This bit is set if the endpoint n number of banks (EPBK) and size (EPSIZE) are correct compared to the maximal allowed
number of banks and size for this endpoint and to the maximal FIFO size (i.e. the DPRAM size).
If this bit is cleared, the user shall rewrite correct values to the EPBK and EPSIZE fields in the UECFGn register.
CTRLDIR: Control Direction
This bit is set after a SETUP packet to indicate that the following packet is an IN packet.
This bit is cleared after a SETUP packet to indicate that the following packet is an OUT packet.
Writing a zero or a one to this bit has no effect.
RWALL: Read/Write Allowed
This bit is set for IN endpoints when the current bank is not full, i.e., the user can write further data into the FIFO.
This bit is set for OUT endpoints when the current bank is not empty, i.e., the user can read further data from the FIFO.
This bit is never set if STALLRQ is one or in case of error.
This bit is cleared otherwise.
This bit shall not be used for control endpoints.
31
30
29
28
27
26
25
24
-
BYCT
23
22
21
20
19
18
17
16
BYCT
-
CFGOK
CTRLDIR
RWALL
15
14
13
12
11
10
9
8
CURRBK
NBUSYBK
-
ERRORTRANS
DTSEQ
76
543
21
0
SHORT
PACKET
STALLEDI/
CRCERRI
OVERFI
NAKINI/
HBISOFLUSHI
NAKOUTI/
HBISOINERRI
RXSTPI/
UNDERFI
RXOUTI
TXINI