參數資料
型號： R5F213J5TNNP
元件分類： 微控制器/微處理器
英文描述： MICROCONTROLLER, QCC40
封裝： 5 X 5 MM, 0.40 MM PITCH, QFN-40
文件頁數： 3/45頁
文件大?。?/td> 440K
代理商： R5F213J5TNNP
11
ATtiny4/5/9/10 [DATASHEET]
8127F–AVR–02/2013
When using the SEI instruction to enable interrupts, the instruction following SEI will be executed before any pend-
ing interrupts, as shown in the following example.
Note:
4.7.1
Interrupt Response Time
The interrupt execution response for all the enabled AVR interrupts is four clock cycles minimum. After four clock
cycles the Program Vector address for the actual interrupt handling routine is executed. During this four clock cycle
period, the Program Counter is pushed onto the Stack. The vector is normally a jump to the interrupt routine, and
this jump takes three clock cycles. If an interrupt occurs during execution of a multi-cycle instruction, this instruction
is completed before the interrupt is served. If an interrupt occurs when the MCU is in sleep mode, the interrupt exe-
cution response time is increased by four clock cycles. This increase comes in addition to the start-up time from the
selected sleep mode.
A return from an interrupt handling routine takes four clock cycles. During these four clock cycles, the Program
Counter (two bytes) is popped back from the Stack, the Stack Pointer is incremented by two, and the I-bit in SREG
is set.
4.8
Register Description
4.8.1
CCP – Configuration Change Protection Register
Bits 7:0 – CCP[7:0] – Configuration Change Protection
In order to change the contents of a protected I/O register the CCP register must first be written with the correct
signature. After CCP is written the protected I/O registers may be written to during the next four CPU instruction
cycles. All interrupts are ignored during these cycles. After these cycles interrupts are automatically handled again
by the CPU, and any pending interrupts will be executed according to their priority.
When the protected I/O register signature is written, CCP[0] will read as one as long as the protected feature is
enabled, while CCP[7:1] will always read as zero.
Table 4-1 shows the signatures that are in recognised.
Assembly Code Example
sei
; set Global Interrupt Enable
sleep
; enter sleep, waiting for interrupt
; note: will enter sleep before any pending interrupt(s)
Bit
7
6
5432
10
CCP[7:0]
CCP
Read/Write
W
WWWW
WW
R/W
Initial Value
0
0000
00
Table 4-1.
Signatures Recognised by the Configuration Change Protection Register
Signature
Group
Description
0xD8
IOREG: CLKMSR, CLKPSR, WDTCSR
Protected I/O register
相關PDF資料
PDF描述
R5F2L35ACDFP 8-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP52
R5F2L368ANFA 8-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP64
R5F2L3ACADFA 8-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP100
R5F2L388ANFP 8-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP80
R5F2L388ADFA 8-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP80
相關代理商/技術參數
參數描述
R5F213J5TNNP#W4 功能描述:MCU 24KB ROM 2KB RAM 40-QFN RoHS:是 類別:集成電路 (IC) >> 嵌入式 - 微控制器， 系列:R8C/3x/3JT 標準包裝:250 系列:80C 核心處理器:8051 芯體尺寸:8-位 速度:16MHz 連通性:EBI/EMI，I²C，UART/USART 外圍設備:POR，PWM，WDT 輸入/輸出數:40 程序存儲器容量:- 程序存儲器類型:ROMless EEPROM 大小:- RAM 容量:256 x 8 電壓 - 電源 (Vcc/Vdd):4.5 V ~ 5.5 V 數據轉換器:A/D 8x10b 振蕩器型:內部 工作溫度:-40°C ~ 85°C 封裝/外殼:68-LCC（J 形引線） 包裝:帶卷 (TR)
R5F213J6ANNP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:RENESAS MCU
R5F213J6CNNP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:RENESAS MCU
R5F213J6CNNP#U0 功能描述:MCU 1KB FLASH 32K ROM 36-QFN RoHS:是 類別:集成電路 (IC) >> 嵌入式 - 微控制器， 系列:R8C/3x/3JC 標準包裝:250 系列:LPC11Uxx 核心處理器:ARM? Cortex?-M0 芯體尺寸:32-位 速度:50MHz 連通性:I²C，Microwire，SPI，SSI，SSP，UART/USART，USB 外圍設備:欠壓檢測/復位，POR，WDT 輸入/輸出數:40 程序存儲器容量:96KB（96K x 8） 程序存儲器類型:閃存 EEPROM 大小:4K x 8 RAM 容量:10K x 8 電壓 - 電源 (Vcc/Vdd):1.8 V ~ 3.6 V 數據轉換器:A/D 8x10b 振蕩器型:內部 工作溫度:-40°C ~ 85°C 封裝/外殼:48-LQFP 包裝:托盤 其它名稱:568-9587
R5F213J6CNNP#W4 功能描述:MCU 32KB ROM 2.5KB RAM 36-QFN RoHS:是 類別:集成電路 (IC) >> 嵌入式 - 微控制器， 系列:R8C/3x/3JC 標準包裝:300 系列:78K0R/Ix3 核心處理器:78K/0R 芯體尺寸:16-位 速度:40MHz 連通性:3 線 SIO，I²C，LIN，UART/USART 外圍設備:DMA，LVD，POR，PWM，WDT 輸入/輸出數:27 程序存儲器容量:16KB（16K x 8） 程序存儲器類型:閃存 EEPROM 大小:- RAM 容量:1K x 8 電壓 - 電源 (Vcc/Vdd):2.7 V ~ 5.5 V 數據轉換器:A/D 8x10b 振蕩器型:內部 工作溫度:-40°C ~ 85°C 封裝/外殼:38-SSOP 包裝:托盤
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*