參數資料
型號： R5F213J5TNNP
元件分類： 微控制器/微處理器
英文描述： MICROCONTROLLER, QCC40
封裝： 5 X 5 MM, 0.40 MM PITCH, QFN-40
文件頁數： 16/45頁
文件大小： 440K
代理商： R5F213J5TNNP
23
ATtiny4/5/9/10 [DATASHEET]
8127F–AVR–02/2013
7.
Power Management and Sleep Modes
The high performance and industry leading code efficiency makes the AVR microcontrollers an ideal choise for low
power applications. In addition, sleep modes enable the application to shut down unused modules in the MCU,
thereby saving power. The AVR provides various sleep modes allowing the user to tailor the power consumption to
the application’s requirements.
7.1
Sleep Modes
Figure 6-1 on page 17 presents the different clock systems and their distribution in ATtiny4/5/9/10. The figure is
helpful in selecting an appropriate sleep mode. Table 7-1 shows the different sleep modes and their wake up
sources.
Note:
1. The ADC is available in ATtiny5/10, only
2. For INT0, only level interrupt.
To enter any of the four sleep modes, the SE bits in SMCR must be written to logic one and a SLEEP instruction
must be executed. The SM2:0 bits in the SMCR register select which sleep mode (Idle, ADC Noise Reduction,
Standby or Power-down) will be activated by the SLEEP instruction. See Table 7-2 for a summary.
If an enabled interrupt occurs while the MCU is in a sleep mode, the MCU wakes up. The MCU is then halted for
four cycles in addition to the start-up time, executes the interrupt routine, and resumes execution from the instruc-
tion following SLEEP. The contents of the Register File and SRAM are unaltered when the device wakes up from
sleep. If a reset occurs during sleep mode, the MCU wakes up and executes from the Reset Vector.
Note that if a level triggered interrupt is used for wake-up the changed level must be held for some time to wake up
the MCU (and for the MCU to enter the interrupt service routine). See “External Interrupts” on page 36 for details.
7.1.1
Idle Mode
When bits SM2:0 are written to 000, the SLEEP instruction makes the MCU enter Idle mode, stopping the CPU but
allowing the analog comparator, timer/counter, watchdog, and the interrupt system to continue operating. This
sleep mode basically halts clk
CPU and clkNVM, while allowing the other clocks to run.
Idle mode enables the MCU to wake up from external triggered interrupts as well as internal ones like the timer
overflow. If wake-up from the analog comparator interrupt is not required, the analog comparator can be powered
reduce power consumption in idle mode. If the ADC is enabled (ATtiny5/10, only), a conversion starts automatically
when this mode is entered.
Table 7-1.
Active Clock Domains and Wake-up Sources in Different Sleep Modes
Sleep Mode
Active Clock Domains
Oscillators
Wake-up Sources
clk
CPU
clk
NVM
clk
IO
clk
ADC
Mai
n
Clock
So
urce
Enabl
ed
INT0
and
Pi
n
Chan
ge
ADC
Other
I/O
W
a
tchd
og
Interrupt
VLM
Interrupt
Idle
X
XXXX
ADC Noise Reduction
X
X (2)
XX
X
Standby
X
X (2)
X
Power-down
X (2)
X
相關PDF資料
PDF描述
R5F2L35ACDFP 8-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP52
R5F2L368ANFA 8-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP64
R5F2L3ACADFA 8-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP100
R5F2L388ANFP 8-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP80
R5F2L388ADFA 8-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP80
相關代理商/技術參數
參數描述
R5F213J5TNNP#W4 功能描述:MCU 24KB ROM 2KB RAM 40-QFN RoHS:是 類別:集成電路 (IC) >> 嵌入式 - 微控制器， 系列:R8C/3x/3JT 標準包裝:250 系列:80C 核心處理器:8051 芯體尺寸:8-位 速度:16MHz 連通性:EBI/EMI，I²C，UART/USART 外圍設備:POR，PWM，WDT 輸入/輸出數:40 程序存儲器容量:- 程序存儲器類型:ROMless EEPROM 大小:- RAM 容量:256 x 8 電壓 - 電源 (Vcc/Vdd):4.5 V ~ 5.5 V 數據轉換器:A/D 8x10b 振蕩器型:內部 工作溫度:-40°C ~ 85°C 封裝/外殼:68-LCC（J 形引線） 包裝:帶卷 (TR)
R5F213J6ANNP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:RENESAS MCU
R5F213J6CNNP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:RENESAS MCU
R5F213J6CNNP#U0 功能描述:MCU 1KB FLASH 32K ROM 36-QFN RoHS:是 類別:集成電路 (IC) >> 嵌入式 - 微控制器， 系列:R8C/3x/3JC 標準包裝:250 系列:LPC11Uxx 核心處理器:ARM? Cortex?-M0 芯體尺寸:32-位 速度:50MHz 連通性:I²C，Microwire，SPI，SSI，SSP，UART/USART，USB 外圍設備:欠壓檢測/復位，POR，WDT 輸入/輸出數:40 程序存儲器容量:96KB（96K x 8） 程序存儲器類型:閃存 EEPROM 大小:4K x 8 RAM 容量:10K x 8 電壓 - 電源 (Vcc/Vdd):1.8 V ~ 3.6 V 數據轉換器:A/D 8x10b 振蕩器型:內部 工作溫度:-40°C ~ 85°C 封裝/外殼:48-LQFP 包裝:托盤 其它名稱:568-9587
R5F213J6CNNP#W4 功能描述:MCU 32KB ROM 2.5KB RAM 36-QFN RoHS:是 類別:集成電路 (IC) >> 嵌入式 - 微控制器， 系列:R8C/3x/3JC 標準包裝:300 系列:78K0R/Ix3 核心處理器:78K/0R 芯體尺寸:16-位 速度:40MHz 連通性:3 線 SIO，I²C，LIN，UART/USART 外圍設備:DMA，LVD，POR，PWM，WDT 輸入/輸出數:27 程序存儲器容量:16KB（16K x 8） 程序存儲器類型:閃存 EEPROM 大小:- RAM 容量:1K x 8 電壓 - 電源 (Vcc/Vdd):2.7 V ~ 5.5 V 數據轉換器:A/D 8x10b 振蕩器型:內部 工作溫度:-40°C ~ 85°C 封裝/外殼:38-SSOP 包裝:托盤
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*