參數資料
型號: MC68HC912BL16VFU8
廠商: FREESCALE SEMICONDUCTOR INC
元件分類: 微控制器/微處理器
英文描述: 16-BIT, FLASH, 8 MHz, MICROCONTROLLER, PQFP64
封裝: QFP-64
文件頁數: 87/128頁
文件大?。?/td> 3326K
代理商: MC68HC912BL16VFU8
MC68HC912BL16TS/D
61
RTIF — Real-Time Interrupt Flag
This bit is cleared automatically by a write to this register with this bit set.
0 = Time-out has not yet occurred.
1 = Set when the time-out period is met.
CME — Clock Monitor Enable
Read and write anytime.
If FCME is set, this bit has no meaning nor effect.
0 = Clock monitor is disabled. Slow clocks and stop instruction may be used.
1 = Slow or stopped clocks (including the stop instruction) will cause a clock reset sequence.
FCME — Force Clock Monitor Enable
Write once in normal modes, anytime in special modes. Read anytime.
In normal modes, when this bit is set, the clock monitor function cannot be disabled until a reset occurs.
0 = Clock monitor follows the state of the CME bit.
1 = Slow or stopped clocks will cause a clock reset sequence.
In order to use both STOP and clock monitor, the CME bit should be cleared prior to executing a STOP
instruction and set after recovery from STOP. If you plan on using STOP always keep FCME = 0.
FCM — Force Clock Monitor Reset
Writes are not allowed in normal modes, anytime in special modes. Read anytime.
If DISR is set, this bit has no effect.
0 = Normal operation.
1 = Force a clock monitor reset (if clock monitor is enabled).
FCOP — Force COP Watchdog Reset
Writes are not allowed in normal modes; can be written anytime in special modes. Read anytime.
If DISR is set, this bit has no effect.
0 = Normal operation.
1 = Force a COP reset (if COP is enabled).
DISR — Disable Resets from COP Watchdog and Clock Monitor
Writes are not allowed in normal modes, anytime in special modes. Read anytime.
0 = Normal operation.
1 = Regardless of other control bit states, COP and clock monitor will not generate a system reset.
CR2, CR1, CR0 — COP Watchdog Timer Rate Select Bits
The COP system is driven by a constant frequency of E/213. (RTBYP in the RTICTL register allows all
but two stages of this divider to be bypassed for testing in special modes only.) These bits specify an
additional division factor to arrive at the COP time-out rate (the clock used for this module is the E clock).
Write once in normal modes, anytime in special modes. Read anytime.
RTIFLG — Real-Time Interrupt Flag Register
$0015
Bit 7
6
5
4
3
2
1
Bit 0
RTIF
0
RESET:
0
COPCTL — COP Control Register
$0016
Bit 7
6
5
4
3
2
1
Bit 0
CME
FCME
FCM
FCOP
DISR
CR2
CR1
CR0
RESET:
0
1
Normal
RESET:
0
1
0
1
Special
F
re
e
sc
a
le
S
e
m
ic
o
n
d
u
c
to
r,
I
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
n
c
..
.
相關PDF資料
PDF描述
MK74CG117AFT 90 MHz, OTHER CLOCK GENERATOR, PDSO48
MC68HC08AS32ACFU 8-BIT, MROM, 8.4 MHz, MICROCONTROLLER, PQFP64
MC68HRC98JL3ECFA 8-BIT, FLASH, 4 MHz, MICROCONTROLLER, PQFP48
MC68HRC98JL3EMDW 8-BIT, FLASH, 8 MHz, MICROCONTROLLER, PDSO28
MC68HC05C9AFN 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PQCC44
相關代理商/技術參數
參數描述
MC68HC916P1CAA16 功能描述:16位微控制器 - MCU 16B MCU 32K FLASH RoHS:否 制造商:Texas Instruments 核心:RISC 處理器系列:MSP430FR572x 數據總線寬度:16 bit 最大時鐘頻率:24 MHz 程序存儲器大小:8 KB 數據 RAM 大小:1 KB 片上 ADC:Yes 工作電源電壓:2 V to 3.6 V 工作溫度范圍:- 40 C to + 85 C 封裝 / 箱體:VQFN-40 安裝風格:SMD/SMT
MC68HC916P1CFU16 制造商:Rochester Electronics LLC 功能描述:16BIT W/32KB FLASH EEPRO - Bulk
MC68HC916P1VAA16 功能描述:IC MCU 32K FLASH 16MHZ 80-QFP RoHS:是 類別:集成電路 (IC) >> 嵌入式 - 微控制器, 系列:HC16 標準包裝:1 系列:AVR® ATmega 核心處理器:AVR 芯體尺寸:8-位 速度:16MHz 連通性:I²C,SPI,UART/USART 外圍設備:欠壓檢測/復位,POR,PWM,WDT 輸入/輸出數:32 程序存儲器容量:32KB(16K x 16) 程序存儲器類型:閃存 EEPROM 大小:1K x 8 RAM 容量:2K x 8 電壓 - 電源 (Vcc/Vdd):2.7 V ~ 5.5 V 數據轉換器:A/D 8x10b 振蕩器型:內部 工作溫度:-40°C ~ 125°C 封裝/外殼:44-TQFP 包裝:剪切帶 (CT) 其它名稱:ATMEGA324P-B15AZCT
MC68HC916P3CFU16 制造商:Rochester Electronics LLC 功能描述:16BIT MCU FOR GENERAL - Bulk
MC68HC98LJ12CFU 制造商:Rochester Electronics LLC 功能描述: 制造商:Freescale Semiconductor 功能描述: