
MB90M405 Series
DS07-13718-3E
51
*6 : Corresponds to pins FIP0 to FIP59.
Note : VCC in the standard signifies VDD-FIP
= VCC-CPU. Also, use the 3 pins on the left at the same power level.
Here, VSS signifies VSS-IO
= VSS-CPU. Please connect this pin to GND as well.
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
2.
Recommended Operating Conditions
(VSS-IO
= VSS-CPU = AVSS = 0.0 V)
Note : VCC in the standard signifies VDD-FIP
= VCC-CPU. Also, use the 3 pins on the left at the same power level.
Here, Vss signifies VSS-IO
= VSS-CPU. Please connect this pin to GND as well.
WARNING: The recommended operating conditions are required in order to ensure the normal operation of
the semiconductor device. All of the device's electrical characteristics are warranted when the
device is operated within these ranges.
Always use semiconductor devices within their recommended operating condition ranges.
Operation outside these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented
on the data sheet. Users considering application outside the listed conditions are advised to contact
their representatives beforehand.
Parameter
Symbol
Values
Unit
Remarks
Min
Max
Power Voltage
VCC-CPU
3.0
3.6
V
During normal operation
VDD-FIP
3.0
3.6
V
During normal operation
VCC
2.5
3.6
V
Save stop operation status
Input “H ” Volt-
age
VHIS
0.8 VCC
VCC
+ 0.3
V
CMOS hysteresis input pin except I2C
VHIS2
0.8 VCC
VSS
+ 5.0
V
I2C CMOS hysteresis input pin (5 V voltage resistant)
VHIM
VCC
0.3
VCC
+ 0.3
V
MD pin input
Input “ L” Volt-
age
VILS
VSS
0.3
0.2 VCC
V
CMOS hysteresis input pin except I2C
VILS2
VSS
0.3
0.2 VCC
VI2C CMOS hysteresis input pin (5 V voltage resistant)
VILM
VSS
0.3
VSS
+ 0.3
V
MD pin input
Operating
Temperature
Ta
40
+85
°C