參數資料
型號： M37906M8C-XXXFP
元件分類： 微控制器/微處理器
英文描述： 16-BIT, MROM, 20 MHz, MICROCONTROLLER, PDSO42
封裝： 0.450 INCH, 0.80 MM PITCH, PLASTIC, SSOP-42
文件頁數： 86/99頁
文件大?。?/td> 1313K
代理商： M37906M8C-XXXFP
110
In Extended Operating Mode during TX_ARET operation (see section 5.2.4), the radio
transceiver switches to receive state if an acknowledgement of a previously transmitted
frame was requested. During this period, received frames are evaluated but not stored
in the Frame Buffer. This allows the radio transceiver to wait for an acknowledgement
frame and retry the frame transmission without writing the frame again.
A radio transceiver state change, except a transition to SLEEP state or a reset, does
not affect the Frame Buffer content. If the radio transceiver is taken into SLEEP, the
Frame Buffer is powered off and the stored data get lost.
7.4.2 Frame Content
The AT86RF212 supports an IEEE 802.15.4 compliant frame format as shown in Figure
Figure 7-11. AT86RF212 Frame Structure
Note:
1. Writing the FCS can be omitted if TX_AUTO_CRC_ON = 1 (register 0x04,
TRX_CTRL_1).
A frame comprises two sections, the radio transceiver internally generated SHR field
and the user accessible part stored in the Frame Buffer. The SHR contains the
preamble and the SFD field. The variable frame section contains the PHR and the
PSDU including the FCS, see section 6.3. To access the data, follow the procedures
described in section 4.3.2.
The frame length information (PHR field) and the PSDU are stored in the Frame Buffer.
During frame reception, the link quality indicator (LQI) value, the energy detection (ED)
value, and the status information (RX_STATUS) of a received frame are additionally
stored. The radio transceiver appends these values to the frame data during Frame
Buffer read access. For more information, see sections 6.8, 6.5, and 4.3.2, respectively.
If the SRAM read access is used to read an RX frame, the frame length field (PHR) can
be accessed at address 0. The SHR (except the SFD value used to generate the SHR)
cannot be read by the microcontroller.
For frame transmission, the PHR and the PSDU need to be stored in the Frame Buffer.
The maximum Frame Buffer size supported by the radio transceiver is 128 bytes. If the
TX_AUTO_CRC_ON bit is set in register 0x05 (PHY_TX_PWR), the FCS field of the
PSDU is replaced by the automatically calculated FCS during frame transmission.
There is no need to write the FCS field when using the automatic FCS generation.
To manipulate individual bytes of the Frame Buffer, a SRAM write access can be used.
For non IEEE 802.15.4 compliant frames, the minimum frame length supported by the
radio transceiver is 1 byte (Frame Length Field + 1 byte of data).
AT86RF212
8168C-MCU Wireless-02/10
相關PDF資料
PDF描述
M37906M4H-XXXSP 16-BIT, MROM, 20 MHz, MICROCONTROLLER, PDIP42
M37906M4C-XXXFP 16-BIT, MROM, 20 MHz, MICROCONTROLLER, PDSO42
M37906M8C-XXXFP 16-BIT, MROM, 20 MHz, MICROCONTROLLER, PDSO42
M37906M6C-XXXSP 16-BIT, MROM, 20 MHz, MICROCONTROLLER, PDIP42
M37906M4C-XXXFP 16-BIT, MROM, 20 MHz, MICROCONTROLLER, PDSO42
相關代理商/技術參數
參數描述
M37906M8C-XXXSP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:16-BIT CMOS MICROCOMPUTER
M37906T-PRB 功能描述:DEV POD PROBE FOR M37900T2-RPD-E RoHS:否 類別:編程器，開發系統 >> 配件 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program RoHS指令信息:IButton RoHS Compliance Plan 標準包裝:1 系列:- 附件類型:USB 至 1-Wire? RJ11 適配器 適用于相關產品:1-Wire? 設備 產品目錄頁面:1429 (CN2011-ZH PDF)
M37920FCCGP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER FLASH MEMORY VERSION
M37920FCCHP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER FLASH MEMORY VERSION
M37920FGCGP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER FLASH MEMORY VERSION
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*