參數資料
型號： M34556M8H-XXXFP
元件分類： 微控制器/微處理器
英文描述： 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PDSO42
封裝： 0.450 INCH, 0.80 MM PITCH, PLASTIC, SSOP-42
文件頁數： 112/147頁
文件大?。?/td> 1087K
代理商： M34556M8H-XXXFP
Rev.3.02
Dec 22, 2006
page 65 of 142
REJ03B0025-0302
4556 Group
Watchdog timer
The watchdog timer function is valid after system is released
from reset. When not using the watchdog timer function, execute
the DWDT instruction and the WRST instruction continuously,
and clear the WEF flag to “0” to stop the watchdog timer function.
The watchdog timer function is valid after system is returned from
the power down state. When not using the watchdog timer func-
tion, execute the DWDT instruction and the WRST instruction
continuously every system is returned from the power down
state, and stop the watchdog timer function.
When the watchdog timer function and power down function are
used at the same time, execute the WRST instruction before sys-
tem enters into the power down state and initialize the flag
WDF1.
Multifunction
Be careful that the output of port D5 can be used even when INT
pin is selected.
The threshold value is different between port D5 and INT. Accord-
ingly, be careful when the input of both is used.
Be careful that the “H” output of port C can be used even when
output of CNTR pin are selected.
Program counter
Make sure that the PCH does not specify after the last page of
the built-in ROM.
15
16
17
Timer 2 and Timer LC count start timing and count time when
operation starts
Count starts from the rising edge (2) after the first falling edge of
the count source, after Timer 2 and Timer LC operations start (1).
Time to first underflow (3) is different from time among next un-
derflow (4) by the timing to start the timer and count source
operations after count starts.
Fig. 63 Timer count start timing and count time when opera-
tion starts (Timer 2 and Timer LC)
14
Fig. 62 Timer count start timing and count time when opera-
tion starts (Prescaler and Timer 1)
Prescaler and Timer 1 count start timing and count time when
operation starts
Count starts from the first rising edge of the count source (2) af-
ter Prescaler and Timer 1 operations start (1).
Time to first underflow (3) is shorter (for up to 1 period of the
count source) than time among next underflow (4) by the timing
to start the timer and count source operations after count starts.
When selecting CNTR input as the count source of Timer 1,
Timer 1 operates synchronizing with the falling edge of CNTR in-
put.
13
(1) Timer Start
Count Source
Timer Value
Timer Underflow signal
3
2
1
032
103
(4)
(3)
(2)
2
Count Source
Selecting CNTR input
falling edge
(1) Timer Start
Count Source
Timer Value
Timer Underflow Signal
3
2
1
032
103
(4)
(3)
(2)
相關PDF資料
PDF描述
M34556M4H-XXXFP 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PDSO42
M34559G6FP 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PQFP52
M34559G6-XXXFP 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PQFP52
M34570EDFP 4-BIT, OTPROM, 2 MHz, MICROCONTROLLER, PDSO36
M34570M4-XXXFP 4-BIT, MROM, 2 MHz, MICROCONTROLLER, PDSO36
相關代理商/技術參數
參數描述
M34556M8-XXXFP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
M34556MXH-XXXFP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
M34556MX-XXXFP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
M34559G6 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
M34559G6FP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*