Questions in the Configuration Utility
5-13
Table 5.6
Selections for Custom LED Settings for Write Device Slot Status Flags
Question
Explanation
Answers to the following questions permit the designer to change the LED settings for the Write
Device Slot Status Flags. These questions appear in the configuration utility only if the designer has
answered the previous question “Do you want to override the LED patterns that display drive status”
with a “
yes
” response.
Table 5.5
shows the default settings for both the one and two-LED options.
In this section, you will need to issue responses for each of the states 0 through 12.
Please specify one of:
0
- for off
1
- for slow blink
2
- for fast blink
3
- for on
State 0 - Default/Nothing to Report:
Off/0
Off/0
-
Enter new settings per the choices above after the “dash”.
The format of your answers should be:
Two-LED option:
LED1[space]LED2
Example:
3 3
One-LED option:
LED1
Example:
0
State 1 - Ready for
Insertion/Removal:
On/3
On/3
-
Enter new settings after the dash (-), per the choices above.
State 2- Prepare for Operation:
Off/0
Slow/1
-
Enter new settings after the dash (-), per the choices above.
State 3 - Device Faulty:
On/3
Off/0
-
Enter new settings after the dash (-), per the choices above.
State 4 - Device Rebuilding:
Off/0
Fast/2
-
Enter new settings after the dash (-), per the choices above.
State 5 - In Failed Array:
Fast/2
On/3
-
Enter new settings after the dash (-), per the choices above.
State 6 - In Critical Array:
Slow/1
Off/0
-
Enter new settings after the dash (-), per the choices above.
State 7 - Parity Check Operation:
On/3
Off/0
-
Enter new settings after the dash (-), per the choices above.
State 8 - Predicted Fault Failure:
Fast/2
Off/0
-
Enter new settings after the dash (-), per the choices above.
State 9 - No Drive Inserted
(Unconfigured Drive):
On/3
Fast/2
-
Enter new settings after the dash (-), per the choices above.
State 10 - Hot Spare:
Fast/2
Fast/2
-
Enter new settings after the dash (-), per the choices above.
State 11 - Rebuild Stopped:
Off/0
On/3
-
Enter new settings after the dash (-), per the choices above.
State 12 - Identify Slot:
Slow/1
Fast/2
-
Enter new settings after the dash (-), per the choices above.