參數資料
型號： IDT82V3011PVG8
廠商： IDT, Integrated Device Technology Inc
文件頁數： 7/31頁
文件大?。?/td> 0K
描述： IC PLL WAN T1/E1/OC3 SGL 56-SSOP
標準包裝： 1,000
類型： 時鐘/頻率發生器
PLL： 是
主要目的： 電信
輸入： 時鐘
輸出： CMOS，LVDS，TTL
電路數： 1
比率 - 輸入:輸出： 1:12
差分 - 輸入:輸出： 無/是
頻率 - 最大： 32.768MHz
電源電壓： 3 V ~ 3.6 V
工作溫度： -40°C ~ 85°C
安裝類型： 表面貼裝
封裝/外殼： 56-BSSOP（0.295"，7.50mm 寬）
供應商設備封裝： 56-SSOP
包裝： 帶卷 (TR)
其它名稱： 82V3011PVG8
Functional Description
15
May 24, 2006
IDT82V3011
T1/E1/OC3 WAN PLL WITH SINGLE REFERENCE INPUT
2.10
POWER SUPPLY FILTERING TECHNIQUES
To achieve optimum jitter performance, power supply filtering is
required to minimize supply noise modulation of the output clocks. The
common sources of power supply noise are switching power supplies
and the high switching noise from the outputs to the internal PLL. The
82V3011 provides separate power pins: VDDA and VDDD. VDDA pins are
for the internal analog PLL, and VDDD pins are for the core logic as well
as I/O driver circuits.
To minimize switching power supply noise generated by the
switching regulator, the power supply output should be filtered with
sufficient bulk capacity to minimize ripple and 0.1 uF (0402 case size,
ceramic) capacitors to filter out the switching transients.
For the 82V3011, the decoupling for VDDA and VDDD are handled
individually. VDDD and VDDA should be individually connected to the
power supply plane through vias, and bypass capacitors should be used
for each pin. Figure - 10 illustrates how bypass capacitor and ferrite
bead should be connected to each power pin.
The analog power supply VDDA should have low impedance. This
can be achieved by using one 10 uF (1210 case size, ceramic) and at
least two 0.1 uF (0402 case size, ceramic) capacitors in parallel. The 0.1
uF (0402 case size, ceramic) capacitors must be placed next to the
VDDA pins and as close as possible. Note that the 10 uF capacitor must
be of 1210 case size, and it must be ceramic for lowest possible ESR
(Effective Series Resistance). The 0.1 uF should be of case size 0402,
which offers the lowest ESL (Effective Series Inductance) to achieve low
impedance towards the high speed range.
For VDDD, at least three 0.1 uF (0402 case size, ceramic) and one 10
uF (1210 case size, ceramic) capacitors are recommended. The 0.1 uF
capacitors should be placed as close to the VDDD pins as possible.
Please refer to evaluation board schematic for details.
Figure - 10 IDT82V3011 Power Decoupling Scheme
SLF7028T-100M1R1
10
F
0.1
F
0.1
F
37
48
3.3 V
SLF7028T-100M1R1
10
F
0.1
F
0.1
F
13
19
0.1
F
26
3.3 V
IDT82V3011
V
DDA
V
DDA
V
DDD
V
DDD
V
DDD
V
SS
V
SS
V
SS
V
SS
V
SS
12
18
27
38
47
相關PDF資料
PDF描述
VE-BN4-MY-S CONVERTER MOD DC/DC 48V 50W
VE-BN3-MY-S CONVERTER MOD DC/DC 24V 50W
VE-B2H-MW-F2 CONVERTER MOD DC/DC 52V 100W
SI5319C-C-GM IC CLOCK MULT/ATTENUATOR 36QFN
VE-B24-MW-F4 CONVERTER MOD DC/DC 48V 100W
相關代理商/技術參數
參數描述
IDT82V3012 制造商:IDT 制造商全稱:Integrated Device Technology 功能描述:T1/E1/OC3 WAN PLL WITH DUAL REFERENCE INPUTS
IDT82V3012PV 制造商:Integrated Device Technology Inc 功能描述:
IDT82V3012PVG 功能描述:IC PLL WAN T1/E1/OC3 DUAL 56SSOP RoHS:是 類別:集成電路 (IC) >> 時鐘/計時 - 專用 系列:- 標準包裝:1 系列:- 類型:時鐘/頻率發生器，多路復用器 PLL:是 主要目的:存儲器，RDRAM 輸入:晶體 輸出:LVCMOS 電路數:1 比率 - 輸入:輸出:1:2 差分 - 輸入:輸出:無/是 頻率 - 最大:400MHz 電源電壓:3 V ~ 3.6 V 工作溫度:0°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:16-TSSOP（0.173"，4.40mm 寬） 供應商設備封裝:16-TSSOP 包裝:Digi-Reel® 其它名稱:296-6719-6
IDT82V3012PVG8 功能描述:IC PLL WAN T1/E1/OC3 DUAL 56SSOP RoHS:是 類別:集成電路 (IC) >> 時鐘/計時 - 專用 系列:- 標準包裝:1,500 系列:- 類型:時鐘緩沖器/驅動器 PLL:是 主要目的:- 輸入:- 輸出:- 電路數:- 比率 - 輸入:輸出:- 差分 - 輸入:輸出:- 頻率 - 最大:- 電源電壓:3.3V 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:28-SSOP（0.209"，5.30mm 寬） 供應商設備封裝:28-SSOP 包裝:帶卷 (TR) 其它名稱:93786AFT
IDT82V3155 制造商:IDT 制造商全稱:Integrated Device Technology 功能描述:ENHANCED T1/E1/OC3 WAN PLL WITH DUAL REFERENCE INPUTS
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*