參數資料
型號： IDT82P20416DBFG
廠商： IDT, Integrated Device Technology Inc
文件頁數： 60/121頁
文件大小： 0K
描述： IC LIU T1/E1/J1 16CH SH 484BGA
標準包裝： 84
功能： 線路接口單元（LIU）
接口： E1，J1，T1
電路數： 16
電源電壓： 1.8V, 3.3V
功率（瓦特）： 3.10W
工作溫度： -40°C ~ 85°C
安裝類型： 表面貼裝
封裝/外殼： 484-LFBGA
供應商設備封裝： 484-CABGA（19x19）
包裝： 托盤
包括： AIS 警報檢測器和發生器，回送功能，PRBS 發生器 / 檢測器，遠程檢測器和發生器
IDT82P20416
16-CHANNEL SHORT HAUL T1/E1/J1 LINE INTERFACE UNIT
Functional Description
43
December 17, 2009
3.5.7.2 Remote Loopback
Remote Loopback can be configured manually or automatically.
Either manual Remote Loopback configuration or automatic Remote
Loopback configuration will enable Remote Loopback.
Manual Remote Loopback is enabled by the RLP bit (b1, LOOP,...).
Automatic Remote Loopback is enabled when the pattern detection
is assigned in the receive path (i.e., the PD_POS bit (b3, PD,...) is ‘0’)
and the AUTOLP bit (b3, LOOP,...) is ‘1’. The corresponding channel will
enter Remote Loopback when the activate IB code is detected in the
receive path for more than 5.1 sec.; and will return from Remote Loop-
back when the deactivate IB code is detected in the receive path for
more than 5.1 sec. Refer to section Inband Loopback (IB) Detection on
page 40 for details. When automatic Remote Loopback is active, setting
the AUTOLP bit (b3, LOOP,...) back to ‘0’ will also stop automatic
Remote Loopback. The setting of the PD_POS bit (b3, PD,...) should not
be changed during automatic Remote Loopback. The AUTOLP_S bit
(b7, STAT0,...) indicates the automatic Remote Loopback status.
In Remote Loopback mode, the data stream output from the RJA (if
enabled) is internally looped to the Waveform Shaper. The data stream
received from the line side is still output to the system side, while the
data stream input from the system side is covered by the Remote Loop-
back data and the status on TCLKn does not affect the Remote Loop-
back. However, the BPV/CV, EXZ, SLOS, AIS and pattern detection in
the transmit path still monitors the data stream input from the system
side.
In Remote Loopback mode, the priority of the diagnostic facilities in
the receive path is: pattern generation > AIS generation; the priority of
the diagnostic facilities in the transmit path is: pattern generation >
looped data. AIS generation is disabled in the transmit path. Refer to
Figure-26 Priority Of Diagnostic Facilities During Manual Remote Loopback
Tx path
BPV/CV, EXZ, SLOS,
AIS, pattern detection
Pattern generation
Auto AIS
generation
X
Rx path
LLOS, AIS
detection
AIS generation
BPV/CV, EXZ,
pattern detection
Pattern generation
Remote
Loopback
相關PDF資料
PDF描述
IDT82P20516DBFG IC LIU T1/E1/J1 16CH SH 484BGA
IDT82P2281PF TXRX T1/E1/J1 LONG/SHORT 80-TQFP
IDT82P2282PF TXRX T1/J1/E1 2CHAN 100-TQFP
IDT82P2284BB TXRX T1/J1/E1 4CHAN 208-PBGA
IDT82P2288BBG TXRX OCTAL T1/E1/J1 256-PBGA
相關代理商/技術參數
參數描述
IDT82P20416DBFG8 制造商:Integrated Device Technology Inc 功能描述:IC LIU T1/E1/J1 16CH SH 484BGA
IDT82P20416DBFGBLANK 制造商:IDT 制造商全稱:Integrated Device Technology 功能描述:16-Channel Short Haul T1/E1/J1 Line Interface Unit
IDT82P20516 制造商:IDT 制造商全稱:Integrated Device Technology 功能描述:16-Channel Short Haul E1 Line Interface Unit
IDT82P20516BFBLANK 制造商:IDT 制造商全稱:Integrated Device Technology 功能描述:16-Channel Short Haul E1 Line Interface Unit
IDT82P20516BFGBLANK 制造商:IDT 制造商全稱:Integrated Device Technology 功能描述:16-Channel Short Haul E1 Line Interface Unit
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*