211
4. TCF clear timing
TCF can be cleared by a compare match with OCRF.
5. Timer overflow flag (OVF) set timing
OVF is set to 1 when TCF overflows from H'FFFF to H'0000.
6. Compare match flag set timing
The compare match flag (CMFH or CMFL) is set to 1 when the TCF and OCRF values match.
The compare match signal is generated in the last state during which the values match (when TCF
is updated from the matching value to a new value). When TCF matches OCRF, the compare
match signal is not generated until the next counter clock.
7. Timer F operation modes
Timer F operation modes are shown in table 9-10.
Table 9-10 Timer F Operation Modes
Operation
Mode
Reset
Active
Sleep
Watch
Subactive Subsleep
Standby
Module
Standby
TCF
Reset
Functions
Functions
Functions/
Halted
*
Functions/
Halted
*
Functions/
Halted
*
Halted
Halted
OCRF
Reset
Functions
Held
Held
Functions
Held
Held
Held
TCRF
Reset
Functions
Held
Held
Functions
Held
Held
Held
TCSRF
Reset
Functions
Held
Held
Functions
Held
Held
Held
Note:
*
When
/4 is selected as the TCF internal clock in active mode or sleep mode, since
the system clock and internal clock are mutually asynchronous, synchronization is
maintained by a synchronization circuit. This results in a maximum count cycle error of
1/
(s). When the counter is operated in subactive mode, watch mode, or subsleep
mode,
/4 must be selected as the internal clock. The counter will not operate if any
other internal clock is selected.