參數資料
型號： DS2196
元件分類： 通信及網絡
英文描述： Ultraframer DS3/E3/DS2/E2/DS1/E1/DS0
中文描述： Ultraframer DS3/E3/DS2/E2/DS1/E1/DS0
文件頁數： 97/157頁
文件大?。?/td> 734K
代理商： DS2196
DS2196
97 of 157
ERCA: ERROR RATE CONTROL REGISTER FRAMER A (Address = 80 Hex)
ERCB: ERROR RATE CONTROL REGISTER FRAMER A (Address = 85 Hex)
(MSB)
WNOE
(LSB)
ER0
RNOE
TCBE
CE
ER3
ER2
ER1
SYMBOL
WNOE
POSITION
ERC.7
NAME AND DESCRIPTION
Write NOE Registers.
If the Host wishes to update to the
NOE registers, this bit must be toggled from a 0 to a 1 after
the Host has already loaded the prescribed error count into the
NOE registers. The toggling of this bit causes the error count
loaded into the NOE registers to be loaded into the error
insertion circuitry on the next clock cycle. Subsequent
updates require that the WNOE bit be set to 0 and then 1 once
again.
Read RNOEL Registers.
If the Host wishes to obtain the
latest count of the number of errors left to be inserted by the
error insertion function, then this bit must be toggled from a 0
to a 1. Subsequent reads require that the RNOE bit be set to 0
and then 1 once again. The Host must wait at least 972 ns
(1.5 clock periods) after toggling this bit to read the NOEL
registers. The Host may read the NOEL registers at any time
but they will contain either the count of errors left to be
inserted (after toggling the RNOE bit) or the count of the
number of errors that the Host has loaded (after writing to the
NOE registers).
TCHBLK Enable.
This bit determines whether the
TCHBLK signal should be used to “block” certain channels
from being corrupted. When TCBE is set high, then the error
insertion logic will not corrupt DS0 channels in which the
TCHBLK signal has be programmed high.
RNOE
ERC.6
TCBE
ERC.5
0 = all the error insertion logic to corrupt all DS0 channels
1 = allow the error insertion logic to only corrupt the DS0
channels determined by
the TCHBLK signal
Constant Errors.
When this bit is set high (and the ER0 to
ER3 bits are not set to 0000), the error insertion logic will
ignore the Number Of Error registers (NOE1A, NOE2A,
NOE1B, and NOE2B) and generate errors constantly at the
selected insertion rate. When CE is set to 0, the NOE
registers determine how many errors are to be inserted.
Error Rate Bit 3.
Refer to Table 16-1 for details.
Error Rate Bit 2.
Refer to Table 16-1 for details.
Error Rate Bit 1.
Refer to Table 16-1 for details.
Error Rate Bit 0.
Refer to Table 16-1 for details.
CE
ERC.4
ER3
ER2
ER1
ER0
ERC.3
ERC.2
ERC.1
ERC.0
相關PDF資料
PDF描述
DS2196L Ultraframer DS3/E3/DS2/E2/DS1/E1/DS0
DS2196LN Ultraframer DS3/E3/DS2/E2/DS1/E1/DS0
DS21Q43AT Ultraframer DS3/E3/DS2/E2/DS1/E1/DS0
DS21Q43ATN Ultraframer DS3/E3/DS2/E2/DS1/E1/DS0
DS21Q44 Ultraframer DS3/E3/DS2/E2/DS1/E1/DS0
相關代理商/技術參數
參數描述
DS2196L 制造商:DALLAS 制造商全稱:Dallas Semiconductor 功能描述:T1 Dual Framer LIU
DS2196LN 功能描述:網絡控制器與處理器 IC T1 Dual Framer LIU RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流（最大值）:595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS2196LN+ 功能描述:網絡控制器與處理器 IC T1 Dual Framer LIU RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流（最大值）:595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS219T 功能描述:烙鐵 DESOLDERING HEAD RoHS:否 制造商:Weller 產品:Soldering Stations 類型:Digital, Iron, Stand, Cleaner 瓦特:50 W 最大溫度:+ 850 F 電纜類型:US Cord Included
DS21E352 功能描述:網絡控制器與處理器 IC RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流（最大值）:595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*