參數資料
型號： DM9102DE
廠商： Electronic Theatre Controls, Inc.
英文描述： SINGLE CHIP FAST ETHEMET NIC CONTROLLER
中文描述： 單晶片快速以太網NIC控制器
文件頁數： 34/70頁
文件大小： 2245K
代理商： DM9102DE
34
Preliminary datasheet
Version: DM9102D-DS-P02
Jan. 14, 2005
Bit
15
Name
100BASE-T4
Default
0,RO/P
Description
100BASE-T4 Capable:
1=DM9102D is able to perform in 100BASE-T4 mode.
0=DM9102D is not able to perform in 100BASE-T4 mode.
100BASE-TX FULL DUPLEX CAPABLE:
0= DM9102D is not able to perform 100BASE-TX in Full Duplex mode.
100BASE-TX Half Duplex Capable:
1=DM9102D is able to perform 100BASE-TX in Half Duplex mode.
0=DM9102D is not able to perform 100BASE-TX in Half Duplex mode.
10BASE-T Full Duplex Capable:
1=DM9102D is able to perform 10BASE-T in Full Duplex mode.
0=DM9102D is not able to perform 10BASE-T in Full Duplex mode.
10BASE-T Half Duplex Capable:
1=DM9102D is able to perform 10BASE-T in Half Duplex mode.
0=DM9102D is not able to perform 10BASE-T in Half Duplex mode .
0000,RO Reserved:
Write as 0, ignore on read
1,RW
MII Frame Preamble Suppression:
1=PHY will accept management frames with preamble suppressed.
0=PHY will not accept management frames with preamble suppressed.
0,RO
Auto-negotiation Complete:
1=Auto-negotiation process is completed.
0=Auto-negotiation process is not completed.
0,RC/LH Remote Fault:
1= Remote fault condition detected (cleared on read or by a chip reset). Fault
criteria and detection method is DM9102D specific implementation. This bit
will set after the RF bit in the ANLPAR (bit 13, register address 05) is set
0= No remote fault condition detected
1,RO/P
Auto Configuration Ability:
1=DM9102D is able to perform Auto-negotiation
0=DM9102D is not able to perform Auto-negotiation
0,RC/LL
Link Status:
1=Valid link established (for either 10Mbps or 100Mbps operation)
0=Link not established
The link status bit is implemented with a latching function, so that the
occurrence of a link failure condition causes the Link Status bit to be cleared
and remain cleared until it is read via the management interface
0,RC/LH Jabber Detect:
1=Jabber condition detected
0=No jabber
This bit is implemented with a latching function. Jabber conditions will set this
bit unless it is cleared by a read to this register through a management
interface or a DM9102D reset. This bit works only in 10Mbps mode
1,RO/P
Extended Capability:
1=Extended register capability
0=Basic register capability only
14
100BASE-TX
Full Duplex
1,RO/P
13
100BASE-TX
Half Duplex
1,RO/P
12
10BASE-T
Full Duplex
1,RO/P
11
10BASE-T
Half Duplex
1,RO/P
10:7
Reserved
6
MF Preamble
Suppression
5
Auto-negotiation
Complete
4
Remote Fault
3
Auto-negotiation
Ability
2
Link Status
1
Jabber Detect
0
Extended
Capability
6.3.3 PHY Identifier Register #1 (PHYIDR1) – 2
相關PDF資料
PDF描述
DM9102 Single Chip Fast Ethernet NIC controller
DM9102A Single Chip Fast Ethernet NIC controller
DM9102AF Single Chip Fast Ethernet NIC controller
DM9102AT Single Chip Fast Ethernet NIC controller
DM9108APPLICATIONENGINEERINGNOTESONE DM9108 Application Engineering notes one
相關代理商/技術參數
參數描述
DM9102DEP 制造商:DAVICOM 功能描述:IC ENET CNTRL 10/100M PHY 1 制造商:DAVICOM 功能描述:IC ENET CNTRL 10/100M PHY 128LQFP 制造商:DAVICOM 功能描述:IC, ENET CNTRL, 10/100M PHY, 128LQFP 制造商:DAVICOM 功能描述:IC, ENET CNTRL, 10/100M PHY, 128LQFP; Data Rate:100Mbps; Ethernet Type:IEEE 802.3u; Supply Voltage Min:2.375V; Supply Voltage Max:2.625V; Digital IC Case Style:LQFP; No. of Pins:128; Interface Type:PCI; Operating Temperature Min:0C;;RoHS Compliant: Yes
DM9102H 制造商:DAVICOM 制造商全稱:DAVICOM 功能描述:Single Chip Fast Ethernet NIC Controller
DM9102HEP 制造商:DAVICOM 制造商全稱:DAVICOM 功能描述:Single Chip Fast Ethernet NIC Controller
DM9103 制造商:DAVICOM 制造商全稱:DAVICOM 功能描述:10/100 Mbps 3-port Ethernet Switch Controller with PCI Interface
DM9103EP 制造商:DAVICOM 制造商全稱:DAVICOM 功能描述:Three Port Ethernet Switch Controller with PCI Interface
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*