參數資料
型號: BX80532RC2400B
廠商: INTEL CORP
元件分類: 微控制器/微處理器
英文描述: 32-BIT, 2400 MHz, MICROPROCESSOR
文件頁數: 88/99頁
文件大?。?/td> 4142K
代理商: BX80532RC2400B
Datasheet
89
Features
addition, a thermal solution that is significantly under-designed may not be capable of cooling the
processor even when the TCC is active continuously. Refer to the Intel
Pentium 4 Processor
with 512-KB L2 Cache on 0.13 Micron Process Thermal Design Guide for information on
designing a thermal solution.
The duty cycle for the TCC, when activated by the Thermal Monitor, is factory configured and
cannot be modified. The Thermal Monitor does not require any additional hardware, software
drivers, or interrupt handling routines.
The TCC may also be activated via On-Demand mode. If bit 4 of the ACPI Thermal Monitor
Control Register is written to a 1 the TCC will be activated immediately, independent of the
processor temperature. When using On-Demand mode to activate the TCC, the duty cycle of the
clock modulation is programmable via bits 3:1 of the same ACPI Thermal Monitor Control
Register. In automatic mode, the duty cycle is fixed, however in On-Demand mode, the duty cycle
can be programmed from 12.5% on/ 87.5% off, to 87.5% on/12.5% off in 12.5% increments. On-
Demand mode may be used while Automatic mode is enabled. However, if the system tries to
enable the TCC via On-Demand mode while automatic mode is enabled and a high temperature
condition exists, the duty cycle of the automatic mode will override the duty cycle selected by the
On-Demand mode.
An external signal, PROCHOT# (processor hot) is asserted when the processor detects that its
temperature is at the thermal trip point. Bus snooping and interrupt latching are also active while
the TCC is active. The temperature at which the thermal control circuit activates is not user
configurable and is not software visible.
Besides the thermal sensor and TCC, the Thermal Monitor feature also includes one ACPI register,
performance monitoring logic, bits in three model specific registers (MSR), and one I/O pin
(PROCHOT#). All are available to monitor and control the state of the Thermal Monitor feature.
Thermal Monitor can be configured to generate an interrupt upon the assertion or de-assertion of
PROCHOT#.
If automatic mode is disabled, the processor will be operating out of specification. Regardless of
enabling of the automatic or On-Demand modes, in the event of a catastrophic cooling failure, the
processor will automatically shut down when the silicon has reached a temperature of
approximately 135 °C. At this point the system bus signal THERMTRIP# will go active and stay
active until RESET# has been initiated. THERMTRIP# activation is independent of processor
activity and does not generate any bus cycles. If THERMTRIP# is asserted, processor core voltage
(VCC) must be removed within the time frame defined in Table 19.
相關PDF資料
PDF描述
BU-61559D1-230W 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQIP78
BU-61559D1-230 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQIP78
BU-61559D1-260Y 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQIP78
BU-61559D1-340Q 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQIP78
BU-61559D1-660Q 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQIP78
相關代理商/技術參數
參數描述
BX80532RC2500B 制造商:Intel 功能描述:MPU CELERON PROCESSOR 0.13UM 2.5GHZ 478-PIN FCPGA2 - Boxed Product (Development Kits)
BX80532RC2600B 制造商:Intel 功能描述:MPU CELERON PROCESSOR 0.13UM 2.6GHZ - Boxed Product (Development Kits)
BX80532RC2800B 制造商:Intel 功能描述:MPU CELERON PROCESSOR 0.13UM 2.8GHZ - Boxed Product (Development Kits)
BX80536NC1700EJ 制造商:Intel 功能描述:MPU CELERON PROCESSOR 390 RISC 64-BIT 90NM 1.7GHZ 1.05V - Boxed Product (Development Kits)
BX80537T5500 S L9SH 制造商:Intel 功能描述:MPU Core?2 Duo Processor T5500 64-Bit 65nm 1.66GHz 1.05V 478-Pin FCPGA6