
Am30LV0064D
41
Revision B+2 (February 1999)
Physical Dimensions
Added the FBE040 drawing.
Revision B+3 (March 8, 1999)
Ordering Information
Changed nomenclature for the FBE040 FBGA pack-
age to WG.
Revision B+4 (April 21, 1999)
Physical Dimensions
Corrected the BSC length and width dimensions in the
FBE040 drawing for the ball grid array.
Revision B+5 (June 17, 1999)
Global
Deleted references to K40 ordering part number and
commercial temperature range.
Distinctive Characteristics
Endurance is now 10,000 cycles. Added bullets for in-
dustrial range and 100% good blocks.
AC Characteristics
Changed t
WH
to 20 ns. Added note for t
REA
.
Revision C (May 19, 2000)
Global
Changed the data sheet designation from “advance in-
formation” to “preliminary.” Only minor parameter
changes, if any, may occur. Changes to speed, pack-
age, and temperature range combinations may also
appear in future data sheet revisions.
Connection Diagrams
Changed NC to RFU (reserved for future use) on the
following: pin 6 on standard TSOP-II, pin 39 on re-
verse TSOP-II, and ball E1 on FBGA.
Pin Configuration
Added definition of RFU.
Functional Pin Description
Address Latch Enable (ALE): Added ALE signal
equirement for address sequence.
Read Data, Gapless Read, Read Spare Area, and
Input Data and Page Program figures
Added CE# don’t care areas to waveforms. Added
notes to figures.
Page Program description
In second paragraph, modified statement on partial
page programming.
Program Operations Flow Chart figure
Added address pointed command box below Start
box.
AC Characteristics
Normal Operation table: Modified note 2.
Physical Dimensions
Replaced figures with more detailed illustrations.
Revision C+1 (June 23, 2000)
Ordering Information
Corrected valid combination and package marking for
FBGA package.
Revision C+2 (August 14, 2000)
DC Characteristics table
Added
V
CC
= V
CCQ
as test conditions for V
OL
and V
OH
.
AC Characteristics
Command, Address, and Data Input table:
Changed
t
WP
from 25 to 30 ns, and t
WH
from 20 to 15 ns.
Revision C+3 (October 6, 2000)
Global
Removed “Preliminary” status from data sheet.
DC Characteristics table
Deleted RESET# as a test condition for I
SB2
; the device
does not have that input.
Trademarks
Copyright 2000 Advanced Micro Devices, Inc. All rights reserved.
AMD, the AMD logo, and combinations thereof are registered trademarks of Advanced Micro Devices, Inc.
ExpressFlash is a trademark of Advanced Micro Devices, Inc.
Product names used in this publication are for identification purposes only and may be trademarks of their respective companies.