參數資料
型號： ADUC7128BSTZ126-RL
廠商： Analog Devices Inc
文件頁數： 47/92頁
文件大?。?/td> 0K
描述： IC DAS MCU ARM7 ADC/DDS 64-LQFP
產品培訓模塊： ARM7 Applications & Tools
Intro to ARM7 Core & Microconverters
Process Control
Direct Digital Synthesis Tutorial Series (1 of 7): Introduction
標準包裝： 1
系列： MicroConverter® ADuC7xxx
核心處理器： ARM7
芯體尺寸： 16/32-位
速度： 41.78MHz
連通性： I²C，SPI，UART/USART
外圍設備： PLA，POR，PWM，PSM，溫度傳感器，WDT
輸入/輸出數： 28
程序存儲器容量： 126KB（63K x 16）
程序存儲器類型： 閃存
RAM 容量： 8K x 8
電壓 - 電源 (Vcc/Vdd)： 3 V ~ 3.6 V
數據轉換器： A/D 10x12b; D/A 1x10b
振蕩器型： 內部
工作溫度： -40°C ~ 125°C
封裝/外殼： 64-LQFP
包裝： 標準包裝
配用： EVAL-ADUC7128QSPZ-ND - KIT DEV FOR ADUC7128
其它名稱： ADUC7128BSTZ126-RLDKR
ADuC7128/ADuC7129
Rev. 0 | Page 51 of 92
DIGITAL PERIPHERALS
PWM GENERAL OVERVIEW
The ADuC7128/ADuC7129 integrate a six channel PWM inter-
face. The PWM outputs can be configured to drive an H-bridge
or can be used as standard PWM outputs. On power up, the PWM
outputs default to H-bridge mode. This ensures that the motor
is turned off by default. In standard PWM mode, the outputs
are arranged as three pairs of PWM pins. Users have control
over the period of each pair of outputs and over the duty cycle
of each individual output.
Table 63. PWM MMRs
Name
Description
PWMCON1
PWM Control
PWM1COM1
Compare Register 1 for PWM Outputs 1 and 2
PWM1COM2
Compare Register 2 for PWM Outputs 1 and 2
PWM1COM3
Compare Register 3 for PWM Outputs 1 and 2
PWM1LEN
Frequency Control for PWM Outputs 1 and 2
PWM2COM1
Compare Register 1 for PWM Outputs 3 and 4
PWM2COM2
Compare Register 2 for PWM Outputs 3 and 4
PWM2COM3
Compare Register 3 for PWM Outputs 3 and 4
PWM2LEN
Frequency Control for PWM Outputs 3 and 4
PWM3COM1
Compare Register 1 for PWM Outputs 5 and 6
PWM3COM2
Compare Register 2 for PWM Outputs 5 and 6
PWM3COM3
Compare Register 3 for PWM Outputs 5 and 6
PWM3LEN
Frequency Control for PWM Outputs 5 and 6
PWMCON2
PWM Convert Start Control
PWMICLR
PWM Interrupt Clear
In all modes, the PWMxCOMx MMRs controls the point at
which the PWM outputs change state. An example of the first pair
of PWM outputs (PWM1 and PWM2) is shown in Figure 49.
HIGH SIDE
(PWM1)
LOW SIDE
(PWM2)
PWM1COM3
PWM1COM2
PWM1COM1
PWM1LEN
0
60
20
-0
44
Figure 49. PWM Timing
The PWM clock is selectable via PWMCON1 with one of the
following values: UCLK/2, 4, 8, 16, 32, 64, 128, or 256. The
length of a PWM period is defined by PWMxLEN.
The PWM waveforms are set by the count value of the 16-bit
timer and the compare registers contents as shown with the
PWM1 and PWM2 waveforms above.
The low-side waveform, PWM2, goes high when the timer
count reaches PWM1LEN, and it goes low when the timer
count reaches the value held in PWM1COM3 or when the
high-side waveform PWM1 goes low.
The high-side waveform, PWM1, goes high when the timer
count reaches the value held in PWM1COM1, and it goes low
when the timer count reaches the value held in PWM1COM2.
Table 64. PWMCON1 MMR Bit Designations
Bit
Name
Description
14
SYNC
Enables PWM Synchronization.
Set to 1 by the user so that all PWM counters are reset on the next clock edge after the detection of a high-to-low
transition on the SYNC pin.
Cleared by user to ignore transitions on the SYNC pin.
13
PWM6INV
Set to 1 by the user to invert PWM6.
Cleared by user to use PWM6 in normal mode.
12
PWM4NV
Set to 1 by the user to invert PWM4.
Cleared by user to use PWM4 in normal mode.
11
PWM2INV
Set to 1 by the user to invert PWM2.
Cleared by user to use PWM2 in normal mode.
10
PWMTRIP
Set to 1 by the user to enable PWM trip interrupt. When the PWMTRIP input is low, the PWMEN bit is cleared and an
interrupt is generated.
Cleared by user to disable the PWMTRIP interrupt.
9
ENA
If HOFF = 0 and HMODE = 1.
Set to 1 by the user to enable PWM outputs.
Cleared by user to disable PWM outputs.
If HOFF = 1 and HMODE = 1, see Table 65.
If not in H-Bridge mode, this bit has no effect.
8
PWMCP2
PWM Clock Prescaler Bits.
7
PWMCP1
Sets UCLK divider.
相關PDF資料
PDF描述
VI-BTJ-IX CONVERTER MOD DC/DC 36V 75W
VI-BTJ-IW CONVERTER MOD DC/DC 36V 100W
VI-BTH-IX CONVERTER MOD DC/DC 52V 75W
AT91SAM7X256B-CU-999 IC MCU ARM 256KB FLASH 100TFBGA
VI-BT4-IW CONVERTER MOD DC/DC 48V 100W
相關代理商/技術參數
參數描述
ADUC7128BSTZ126-RL2 制造商:AD 制造商全稱:Analog Devices 功能描述:Precision Analog Microcontroller ARM7TDMI MCU with 12-Bit ADC and DDS DAC
ADUC7129 制造商:AD 制造商全稱:Analog Devices 功能描述:Precision Analog Microcontroller ARM7TDMI MCU with 12-Bit ADC and DDS DAC
ADUC7129BSTZ126 功能描述:IC DAS MCU ARM7 ADC/DDS 80-LQFP RoHS:是 類別:集成電路 (IC) >> 嵌入式 - 微控制器， 系列:MicroConverter® ADuC7xxx 標準包裝:38 系列:Encore!® XP® 核心處理器:eZ8 芯體尺寸:8-位 速度:5MHz 連通性:IrDA，UART/USART 外圍設備:欠壓檢測/復位，LED，POR，PWM，WDT 輸入/輸出數:16 程序存儲器容量:4KB（4K x 8） 程序存儲器類型:閃存 EEPROM 大小:- RAM 容量:1K x 8 電壓 - 電源 (Vcc/Vdd):2.7 V ~ 3.6 V 數據轉換器:- 振蕩器型:內部 工作溫度:-40°C ~ 105°C 封裝/外殼:20-SOIC（0.295"，7.50mm 寬） 包裝:管件 其它名稱:269-4116Z8F0413SH005EG-ND
ADUC7129BSTZ1262 制造商:AD 制造商全稱:Analog Devices 功能描述:Precision Analog Microcontroller ARM7TDMI MCU with 12-Bit ADC and DDS DAC
ADUC7129BSTZ126-RL 功能描述:IC DAS MCU ARM7 ADC/DDS 80-LQFP RoHS:是 類別:集成電路 (IC) >> 嵌入式 - 微控制器， 系列:MicroConverter® ADuC7xxx 產品培訓模塊:Graphics LCD System and PIC24 Interface Asynchronous Stimulus 標準包裝:27 系列:PIC® 24H 核心處理器:PIC 芯體尺寸:16-位 速度:40 MIP 連通性:I²C，SPI，UART/USART 外圍設備:欠壓檢測/復位，POR，PWM，WDT 輸入/輸出數:21 程序存儲器容量:12KB（4K x 24） 程序存儲器類型:閃存 EEPROM 大小:- RAM 容量:1K x 8 電壓 - 電源 (Vcc/Vdd):3 V ~ 3.6 V 數據轉換器:A/D 10x10b/12b 振蕩器型:內部 工作溫度:-40°C ~ 85°C 封裝/外殼:28-SOIC（0.295"，7.50mm 寬） 包裝:管件 產品目錄頁面:648 (CN2011-ZH PDF) 配用:AC164339-ND - MODULE SKT FOR PM3 28SOICDV164033-ND - KIT START EXPLORER 16 MPLAB ICD2
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*