參數資料
型號： 73S1217F-68MR/F/PE
廠商： Maxim Integrated Products
文件頁數： 92/140頁
文件大小： 0K
描述： IC SOC SMART CARD READER 68QFN
標準包裝： 2,500
系列： *
DS_1217F_002
73S1217F Data Sheet
Rev. 1.2
55
A 32-bit RTC counter is clocked by a selectable clock (1/2, 1, 2 second) to measure time. A trimming
function is provided such that a trim value is accumulated in a 24-bit accumulator at the same rate as the
RTC counter. The trim value is sign magnitude number. When the accumulator reaches overflow, it will
advance the counter one additional count if the trim value is positive, or prevent the counter from
advancing one count if the trim value is negative. This mechanism allows the RTC counter to be adjusted
to keep accurate time with a minimum 0.5 second resolution. When using the high speed oscillator, the
RTC counter wants to have an extra count added every 9375 seconds to keep the RTC counter at the
proper time. If the one second RTC counter rate is used, the RTC Trim value should be set to 0x6FD
(1789 decimal). This value is derived by taking the resolution of the 24 bit accumulator (2 ^ 24 =
16777216) and dividing this by 9375. This means the RTC accumulator will overflow every 9375 seconds
and will cause the RTC counter to advance by 2 when the accumulator overflow occurs, thus bringing the
RTC count to the proper time.
In addition to the basic software watchdog timer included in the 80515 MPU, an independent, robust,
fixed-duration, hardware watchdog timer (WDT) is included with the 73S1217F RTC. The Watch Dog
timer will give the MPU second to respond to the RTC Interrupt. If the processor does not perform an
RTC Interrupt service, a full RESET will be performed. The RTC interrupt is connected to the core
interrupt “external interrupt 5” signal. The RTC interrupt must be enabled to obtain the watchdog timer
function. Note: if the power down mode doesn’t want the watchdog to wake up the MPU, the RTC
interrupt should be masked before entering the power down mode.
Real Time Clock Control Register (RTCCtl) : 0x FFB0
0x00
Table 54: The RTCCtl Register
MSB
LSB
–
RTCLD CTSEL.1 CTSEL.0 RINT.2
RINT.1
RINT.0
Bit
Symbol
Function
RTCCtl.7
–
RTCCtl.6
–
RTCCtl.5
RTCLD
When set, RTC parameters (RTC Count, RTC Accumulator, and RTC
Trim) are loaded at the next 32kHz clock positive edge.
RTCCtl.4
CTSEL.1
Selects the time value that is counted by the real time clock:
0x – 1 second (default)
10 – second
11 – 2 seconds
RTCCtl.3
CTSEL.0
RTCCtl.2
RINT.2
RTC interrupt internal selection bits: (listed as bits 2,1,0)
100 – 0.5 second
0xx – 1 second (default)
101 – 2 seconds
110 – 4 seconds
111 – 8 seconds
RTCCtl.1
RINT.1
RTCCtl.0
RINT.0
相關PDF資料
PDF描述
73S8010C-ILR/F IC SMART CARD INTERFACE 28-SOIC
73S8010R-ILR/F IC SMART CARD INTERFACE 28-SOIC
73S8014R-IL/F IC SMART CARD 7816 EMV 20-SOIC
73S8014RN-ILR/F IC SMART CARD 7816 EMV 20-SOIC
73S8023C-IMR/F IC SMART CARD INTERFACE 32-QFN
相關代理商/技術參數
參數描述
73S1217F-EB 功能描述:開發板和工具包 - 8051 73S1217F Eval Brd (Usb Cable, Doc. Cd) RoHS:否 制造商:Silicon Labs 產品:Development Kits 工具用于評估:C8051F960, Si7005 核心: 接口類型:USB 工作電源電壓:
73S1217F-EB-Lite 功能描述:開發板和工具包 - 8051 73S1217F EVB Lite w/Plug & Play/Usb RoHS:否 制造商:Silicon Labs 產品:Development Kits 工具用于評估:C8051F960, Si7005 核心: 接口類型:USB 工作電源電壓:
73S1217F-IMR/F 制造商:TERIDIAN 制造商全稱:TERIDIAN 功能描述:Bus-Powered 80515 System-on-Chip with USB, ISO 7816 / EMV, PINpad and More
73S13B 制造商:QUARTZCOM 制造商全稱:QUARTZCOM the communications company 功能描述:-20 ~ +70 °C commercia l application -30 ~ +75 °C on request
73S5040G01X0A 制造商:NEX Computers 功能描述:INTEL 40GB SSD - Bulk
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*