2-MBIT SmartVoltage BOOT BLOCK FAMILY
E
28
SEE NEW DESIGN RECOMMENDATIONS
4.0
ELECTRICAL SPECIFICATIONS
4.1
Absolute Maximum Ratings*
Commercial Operating Temperature
During Read..............................
0 °C to +70 °C
During Block Erase
and Word/Byte Program............ 0 °C to +70 °C
Temperature Under Bias ....... –10 °C to +80 °C
Extended Operating Temperature
During Read.......................... –40 °C to +85 °C
During Block Erase
and Word/Byte Program........ –40 °C to +85 °C
Temperature Under Bias ....... –40 °C to +85 °C
Storage Temperature................. –65 °C to +125 °C
Voltage on Any Pin
(except V
CC
, V
PP
, A
9
and RP#)
with Respect to GND........... –2.0 V to +7.0 V
(2)
Voltage on Pin RP# or Pin A
9
with Respect to GND.......–2.0 V to +13.5 V
(2,3)
V
PP
Program Voltage with Respect
to GND during Block Erase
and Word/Byte Program..–2.0 V to +14.0 V
(2,3)
V
CC
Supply Voltage
with Respect to GND........... –2.0 V to +7.0 V
(2)
Output Short Circuit Current....................100 mA
(4)
NOTICE: This datasheet contains preliminary information on
new products in production. Do not finalize a design with
this information.
Revised information will be published when
the product is available. Verify with your local Intel Sales
office that you have the latest datasheet before finalizing a
design.
* WARNING: Stressing the device beyond the "Absolute
Maximum Ratings" may cause permanent damage. These
are stress ratings only. Operation beyond the "Operating
Conditions" is not recommended and extended exposure
beyond the "Operating Conditions" may effect device
reliability.
NOTES:
1.
Operating temperature is for commercial product
defined by this specification.
2.
Minimum DC voltage is
–0.5 V on input/output pins.
During transitions, this level may undershoot to –2.0 V
for periods
<20 ns. Maximum DC voltage on input/output pins is
V
CC
+ 0.5 V which, during transitions, may overshoot to
V
CC
+ 2.0 V for periods <20 ns.
3.
Maximum DC voltage on V
may overshoot to +14.0 V
for periods <20 ns.
Maximum DC voltage on RP# or A
9
may overshoot to 13.5 V for periods <20 ns.
4.
Output shorted for no more than one second.
No more
than one output shorted at a time.
4.2
Commercial Operating Conditions
Table 10. Commercial Temperature and V
CC
Operating Conditions
Symbol
Parameter
Notes
Min
Max
Units
T
A
Operating Temperature
0
+70
°C
V
CC
3.3 V V
CC
Supply Voltage (± 0.3 V)
3.0
3.6
Volts
5 V V
CC
Supply Voltage (10%)
1
4.50
5.50
Volts
5 V V
CC
Supply Voltage (5%)
2
4.75
5.25
Volts
NOTES:
1.
2.
10% V
CC
specifications apply to the 60 ns, 80 ns and 120 ns product versions in their standard test configuration.
5% V
CC
specifications apply to the 60 ns version in its high-speed test configuration.