參數資料
型號： XRT75VL00D
廠商： Exar Corporation
英文描述： E3/DS3/STS-1 LINE INTERFACE UNIT WITH SONET DESYNCHRONIZER
中文描述： E3/DS3/STS-1線路接口單元與SONET DESYNCHRONIZER
文件頁數： 38/92頁
文件大小： 836K
代理商： XRT75VL00D
XRT75VL00D
REV. 1.0.3
E3/DS3/STS-1 LINE INTERFACE UNIT WITH SONET DESYNCHRONIZER
38
0x01
R/W
D0
DMOIE
Writing a “1” to this bit field enables the DMO inter-
rupt and triggers an interrupt when the transmitter
driver fails. Writing a “0” disables the interrupt.
0
D1
RLOSIE
Writing a “1” to this bit field enables the RLOS inter-
rupt and triggers an interrupt when the RLOS condi-
tion occurs. Writing a “0” disables the interrupt.
0
D2
RLOLIE
Writing a “1” to this bit field enables the RLOL inter-
rupt and triggers an interrupt when RLOL condition
occurs. Writing a “0” disables the interrupt.
0
D3
FLIE
Writing a “1” to this bit field enables the FL interrupt
and triggers an interrupt when the FIFO Limit of the
Jitter Attenuator is within 2 bits of overflow/underflow
condition. Writing a “0” disables the interrupt.
NOTE:
This bit field is ignored when the Jitter
Attenuator is disabled.
0
D4
PRBSIE
Writing a “1” to this bit enables the PRBS bit error
interrupt.
0
D5
CNT_SATIE
Writing a “1” to this bit enables the PRBS error-
counter saturation interrupt. When the PRBS error
counter reaches 0xFFFF, an interrupt will be gener-
ated.
0
0x02
Reset
Upon
Read
D0
DMOIS
This bit is set to “1” every time a DMO status change
has occurred since the last cleared interrupt.This bit
is cleared when read.
0
D1
RLOSIS
This bit is set to “1” every time a RLOS status change
has occurred since the last cleared interrupt. This bit
is cleared when read.
0
D2
RLOLIS
This bit is set to “1” every time a RLOL status change
has occurred since the last cleared interrupt. This bit
is cleared when read.
0
D3
FLIS
This bit is set to “1” every time a FIFO Limit status
change has occurred since the last cleared interrupt.
This bit is cleared when read.
0
D4
PRBSIS
This bit is set to “1” when a PRBS bit error
is
detected. This bit is cleared when read.
0
D5
CNT_SATIS
This bit is set to “1” when the PRBS error counter has
saturated (0xFFFF). This bit is cleared when read.
0
TABLE 16: REGISTER MAP DESCRIPTION
ADDRESS
(HEX)
TYPE
BIT LOCATION
SYMBOL
DESCRIPTION
DEFAULT
VALUE(BIN)
相關PDF資料
PDF描述
XRT83SL34IV QUAD T1/E1/J1 SH TRANSCEIVER WITH CLOCK RECOVERY AND JITTER ATTENUATOR
XRT83SL34 QUAD T1/E1/J1 SH TRANSCEIVER WITH CLOCK RECOVERY AND JITTER ATTENUATOR
XS2F-A422-90-A 4 CONTACT(S), POLYBUTYLENE TEREPHTHALATE, FEMALE, CIRCULAR CONNECTOR, CLAMP, SOCKET
XS2F-A422-A90-A 4 CONTACT(S), POLYBUTYLENE TEREPHTHALATE, FEMALE, CIRCULAR CONNECTOR, CLAMP, SOCKET
XS2F-A422-AB0-A 4 CONTACT(S), POLYBUTYLENE TEREPHTHALATE, FEMALE, CIRCULAR CONNECTOR, CLAMP, SOCKET
相關代理商/技術參數
參數描述
XRT75VL00D_08 制造商:EXAR 制造商全稱:EXAR 功能描述:E3/DS3/STS-1 LINE INTERFACE UNIT WITH SONET
XRT75VL00D1V-F 制造商:Exar Corporation 功能描述:
XRT75VL00DES 功能描述:時鐘合成器/抖動清除器 1CHT3/E3/STS1LIU+ DESYNC 3.3V DRV VER RoHS:否 制造商:Skyworks Solutions, Inc. 輸出端數量: 輸出電平: 最大輸出頻率: 輸入電平: 最大輸入頻率:6.1 GHz 電源電壓-最大:3.3 V 電源電壓-最小:2.7 V 封裝 / 箱體:TSSOP-28 封裝:Reel
XRT75VL00DIV 功能描述:時鐘合成器/抖動清除器 3.3V 1 CH E3/DS3/STS W/SONET DE-SYNCH RoHS:否 制造商:Skyworks Solutions, Inc. 輸出端數量: 輸出電平: 最大輸出頻率: 輸入電平: 最大輸入頻率:6.1 GHz 電源電壓-最大:3.3 V 電源電壓-最小:2.7 V 封裝 / 箱體:TSSOP-28 封裝:Reel
XRT75VL00DIV-F 功能描述:時鐘合成器/抖動清除器 3.3V 1 CH E3/DS3/STS W/SONET DE-SYNCH RoHS:否 制造商:Skyworks Solutions, Inc. 輸出端數量: 輸出電平: 最大輸出頻率: 輸入電平: 最大輸入頻率:6.1 GHz 電源電壓-最大:3.3 V 電源電壓-最小:2.7 V 封裝 / 箱體:TSSOP-28 封裝:Reel
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*