參數資料
型號： XRT75R12DIB
廠商： EXAR CORP
元件分類： 數字傳輸電路
英文描述： TWELVE CHANNEL E3/DS3/STS-1 LINE INTERFACE UNIT WITH SONET DESYNCHRONIZER
中文描述： DATACOM, PCM TRANSCEIVER, PBGA420
封裝： 35 X 35 MM, TBGA-420
文件頁數： 78/131頁
文件大?。?/td> 717K
代理商： XRT75R12DIB
XRT75R12D
REV. P1.0.1
TWELVE CHANNEL E3/DS3/STS-1 LINE INTERFACE UNIT WITH SONET DESYNCHRONIZER
PRELIMINARY
73
1
Receive LOS
Defect Condition
Declared
R/O
Receive LOS (Loss of Signal) Defect Condition Declared:
This READ-ONLY bit-field indicates whether or not the Receive Sec-
tion (within Channel_n) is currently declaring the LOS defect condition.
The Receive Section (of Channel_n) will declare the LOS defect condi-
tion, if any one of the following conditions is met.
If the Digital LOS Detector declares the LOS defect condition (for
DS3 or STS-1 applications)
If the Analog LOS Detector declares the LOS defect condition (for
DS3 or STS-1 applications)
If the ITU-T G.775 LOS Detector declares the LOS defect condition
(for E3 applications).
0 - Indicates that the Receive Section of Channel_n is NOT currently
declaring the LOS Defect Condition.
1 - Indicates that the Receive Section of Channel_n is currently declar-
ing the LOS Defect condition.
0
Transmit DMO
Condition Declared
R/O
Transmit DMO (Drive Monitor Output) Condition Declared:
This READ-ONLY bit-field indicates whether or not the Transmit Sec-
tion of Channel_n is currently declaring the DMO Alarm condition.
As configured, the Transmit Section will either internally (via the
TTIP_n and TRING_n ) or externally (via the MTIP_n and MRING_n)
check the Transmit Output DS3/E3/STS-1 Line signal for bipolar
pulses. If the Transmit Section were to detect no bipolar for 128 con-
secutive bit-periods, then it will declare the Transmit DMO Alarm condi-
tion. This particular alarm can be used to check for fault conditions on
the Transmit Output Line Signal path.
The Transmit Section will clear the Transmit DMO Alarm condition
upon detecting bipolar activity on the Transmit Output Line signal.
0 - Indicates that the Transmit Section of Channel_n is NOT currently
declaring the Transmit DMO Alarm condition.
1 - Indicates that the Transmit Section of Channel_n is currently
declaring the Transmit DMO Alarm condition.
B
IT
N
UMBER
N
AME
T
YPE
D
ESCRIPTION
相關PDF資料
PDF描述
XRT75R12 TWELVE CHANNEL E3/DS3/STS-1 LINE INTERFACE UNIT WITH JITTER ATTENUATOR
XRT75R12IB TWELVE CHANNEL E3/DS3/STS-1 LINE INTERFACE UNIT WITH JITTER ATTENUATOR
XRT75VL00 E3/DS3/STS-1 LINE INTERFACE UNIT WITH JITTER ATTENUATOR
XRT75VL00IV E3/DS3/STS-1 LINE INTERFACE UNIT WITH JITTER ATTENUATOR
XRT79L71 1 - CHANNEL DS3/E3 ATM UNI/PPP COMBO IC
相關代理商/技術參數
參數描述
XRT75R12DIB-F 功能描述:網絡控制器與處理器 IC 12 Channel 3.3V-5V temp -45 to 85C RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流（最大值）:595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
XRT75R12DIB-L 功能描述:LIN 收發器 Synch RoHS:否 制造商:NXP Semiconductors 工作電源電壓: 電源電流: 最大工作溫度: 封裝 / 箱體:SO-8
XRT75R12ES 功能描述:時鐘合成器/抖動清除器 12CH T3/E3/STS1LIUJA 3.3V W/REDUNDANCY RoHS:否 制造商:Skyworks Solutions, Inc. 輸出端數量: 輸出電平: 最大輸出頻率: 輸入電平: 最大輸入頻率:6.1 GHz 電源電壓-最大:3.3 V 電源電壓-最小:2.7 V 封裝 / 箱體:TSSOP-28 封裝:Reel
XRT75R12IB 功能描述:外圍驅動器與原件 - PCI 12CH E3/DS3/STS W/JITTER R3 TECH RoHS:否 制造商:PLX Technology 工作電源電壓: 最大工作溫度: 安裝風格:SMD/SMT 封裝 / 箱體:FCBGA-1156 封裝:Tray
XRT75R12IB-F 功能描述:外圍驅動器與原件 - PCI 12 Channel 3.3V-5V temp -45 to 85C RoHS:否 制造商:PLX Technology 工作電源電壓: 最大工作溫度: 安裝風格:SMD/SMT 封裝 / 箱體:FCBGA-1156 封裝:Tray
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*