REV. 1.0.3 TRG[7:0]: Trigger Level Register These bits are used to program desir" />
參數資料
型號: XR19L402IL48-F
廠商: Exar Corporation
文件頁數: 30/49頁
文件大小: 0K
描述: IC UART/TXRX RS485 48QFN
標準包裝: 260
特點: *
通道數: 2,DUART
FIFO's: 64 字節
規程: RS485
電源電壓: 3.3V,5V
帶自動流量控制功能:
帶IrDA 編碼器/解碼器:
帶故障啟動位檢測功能:
帶調制解調器控制功能:
帶CMOS:
安裝類型: 表面貼裝
封裝/外殼: 48-VFQFN 裸露焊盤
供應商設備封裝: 48-QFN-EP(7x7)
包裝: 托盤
XR19L402
36
TWO CHANNEL INTEGRATED UART AND RS-485 TRANSCEIVER
REV. 1.0.3
TRG[7:0]: Trigger Level Register
These bits are used to program desired trigger levels when trigger Table-D is selected. FCTR bit-7 selects
between programming the RX Trigger Level (a logic 0) and the TX Trigger Level (a logic 1).
4.17
RX/TX FIFO Level Count Register (FC) - Read-Only
This register is accessible when LCR = 0xBF. Note that this register is not identical to the FIFO Level Count
Register which is located in the general register set when FCTR bit-6 = 1 (Scratchpad Register Swap). It is
suggested to read the FIFO Level Count Register at the Scratchpad Register location when FCTR bit-6 = 1.
FC[7:0]: RX/TX FIFO Level Count
Receive/Transmit FIFO Level Count. Number of characters in Receiver FIFO (FCTR[7] = 0) or Transmitter
FIFO (FCTR[7] = 1) can be read via this register. Reading this register is not recommended when transmitting
or receiving data.
4.18
Feature Control Register (FCTR) - Read/Write
FCTR[1:0]: Reserved
For normal operation, these bits should remain a logic 0.
FCTR[2]: IrDa RX Inversion
Logic 0 = Select RX input as encoded IrDa data (Idle state will be LOW).
Logic 1 = Select RX input as inverted encoded IrDa data (Idle state will be HIGH).
FCTR[3]: Auto Half-Duplex Direction Control
This bit overrides the HALF/FULL# pin to enable half-duplex mode or full-duplex mode.
Logic 0 = Full-duplex mode. In this mode, the transmit interrupt is generated when the transmit holding
register becomes empty and the transmit shift register is shifting data out.
Logic 1 = Auto half-duplex mode. In this mode, the direction of the RS-485 transceiver is internally controlled
by the RTS# signal. Also, the transmit interrupt generation is delayed until the transmitter shift register
becomes empty.
FCTR[5:4]: Transmit/Receive Trigger Table Select
See
TABLE 14: TRIGGER TABLE SELECT
BIT-5
BIT-4
TABLE
0
Table-A (TX/RX)
0
1
Table-B (TX/RX)
1
0
Table-C (TX/RX)
1
Table-D (TX/RX)
Table 10 for more details.
FCTR[6]: Scratchpad Swap
Logic 0 = Scratch Pad register is selected as general read and write register. ST16C550 compatible mode.
Logic 1 = FIFO Level Count register (Read-Only), Enhanced Mode Select Register (Write-Only). Number of
characters in transmit or receive FIFO can be read via scratch pad register when this bit is set. Enhanced
Mode Select Register is selected when it is written into.
FCTR
相關PDF資料
PDF描述
XR20M1170IL24TR-F IC UART FIFO I2C/SPI 64B 24QFN
XR20M1172IG28-F IC UART FIFO I2C/SPI 64B 28TSSOP
XR20M1280IL40-F IC UART I2C/SPI 128 BYTE 40QFN
XR20V2170IL40-F IC UART/TXRX I2C/SPI RS232 40QFN
XR20V2172IL64-F IC UART/TXRX I2C/SPI RS232 64QFN
相關代理商/技術參數
參數描述
XR1AEX2NV1XX 制造商:Eaton Corporation 功能描述:SWITCH, ROCKER, SPST, 18A, 125VAC, BLACK, Contact Configuration:SPST, Switch Ope 制造商:Eaton Corporation 功能描述:SWITCH, ROCKER, SPST, 18A, 125VAC, BLACK, Contact Configuration:SPST, Switch Operation:Off-On, Contact Current Max:18A, Contact Voltage AC Nom:125V, Switch Mounting:Panel, Actuator / Cap Color:Red, Illumination Color:Red , RoHS Compliant: Yes
XR1AEX3NV1XX 制造商:Eaton Corporation 功能描述:SWITCH, ROCKER, SPST, 18A, 125VAC, BLACK, Contact Configuration:SPST, Switch Ope
XR1AEX4NV1XX 制造商:Eaton Corporation 功能描述:SWITCH, ROCKER, SPST, 18A, 125VAC, BLACK, Contact Configuration:SPST, Switch Operation:Off-On, Contact Current Max:18A, Contact Voltage AC Nom:125V, Switch Mounting:Panel, Actuator / Cap Color:Amber, Illumination Color:Amber , RoHS Compliant: Yes
XR1BG33NV1XX 制造商:Eaton Corporation 功能描述:SWITCH, ROCKER, SPDT, 18A, 125VAC, BLACK, Contact Configuration:SPDT, Switch Ope
XR1BG44NV1XX 制造商:Eaton Corporation 功能描述:SWITCH, ROCKER, SPDT, 18A, 125VAC, BLACK, Contact Configuration:SPDT, Switch Operation:On-Off-On, Contact Current Max:18A, Contact Voltage AC Nom:125V, Switch Mounting:Panel, Actuator / Cap Color:Amber, Illumination Color:Amber , RoHS Compliant: Yes