參數資料
型號: UPD72042BGT
廠商: NEC Corp.
英文描述: LSI DEVICES FOR Inter Equipment BusTM (IEBusTM) PROTOCOL CONTROL
中文描述: LSI器件間設備BusTM(IEBusTM)協議控制
文件頁數: 20/92頁
文件大?。?/td> 541K
代理商: UPD72042BGT
μ
PD72042A, 72042B
20
DATA SHEET S13990EJ2V0DS00
(3) Reading a lock address (control bits: 4H, 5H)
When a lock address read operation (4H, 5H) is specified, the address (12 bits) of the master unit that
issued the lock instruction is read in one-byte form, as shown below.
Fig. 2-3 Lock Address Format
MSB
LSB
Control bits : 4H
Control bits : 5H
Low-order 8 bits
Undefined
High-order 4 bits
(4) Locking and unlocking (control bits: Locking (3H, AH, BH), unlocking (6H))
The lock function is used to enable the transfer a message using more than one communication frame.
When locked, a unit cannot receive data from other than the unit that requested the lock.
Locking and unlocking are performed as follows:
1
Locking
The master unit can lock the slave unit by specifying the lock with the corresponding control bits (3H, AH,
BH). In this case, when the transmission or reception of acknowledge bit 0 for the data-length field has been
completed, but the communication frame is then terminated before transmission or reception of as many data
bytes as are specified by the data-length bits is completed, the slave unit is locked. At this time, the bit
indicating the lock status (bit 2) in the slave status byte is set to 1.
2
Unlocking
The master unit can unlock a locked slave unit when the control bits specify locking (3H, AH, or BH) or
unlocking (6H). The slave unit is unlocked once as many data bytes as are specified by the data-length bits
have been transmitted or received within one communication frame. At this time, the bit indicating the lock
status (bit 2) in the slave status byte is reset to 0.
For broadcast, locking or unlocking is not performed.
Caution When a locked unit is to be unlocked by the unit itself, hardware reset or software reset must
be performed. (The lock status can be checked by referring to the contents of the LOR2 register.)
相關PDF資料
PDF描述
UPD72042A LSI DEVICES FOR Inter Equipment BusTM (IEBusTM) PROTOCOL CONTROL
UPD72042AGT LSI DEVICES FOR Inter Equipment BusTM (IEBusTM) PROTOCOL CONTROL
UPD72042B LSI DEVICES FOR Inter Equipment BusTM (IEBusTM) PROTOCOL CONTROL
UPD72065GC Floppy Disk Controller
UPD72065BGC-3B6 RTS Series - Econoline Unregulated DC-DC Converters; Input Voltage (Vdc): 24V; Output Voltage (Vdc): 15V; Power: 2W; Assembly; High Power Density; Optional Continuous Short Circuit Protected; Efficiency to 85%
相關代理商/技術參數
參數描述
UPD72042BGT-A 制造商:Renesas Electronics 功能描述:LSI Device 16-Pin SOP 制造商:Renesas Electronics 功能描述:LSI Device 16-Pin SOP Cut Tape
UPD72042GT(A) 制造商:Renesas Electronics Corporation 功能描述:
UPD720902AF5-667-JF2-E3-A 功能描述:IC ADVANCED MEMORY BUFFER D1 RoHS:是 類別:集成電路 (IC) >> 接口 - 專用 系列:* 標準包裝:90 系列:- 應用:PCI 至 PCI 橋 接口:PCI 電源電壓:3 V ~ 3.6 V 封裝/外殼:257-LFBGA 供應商設備封裝:257-BGA MICROSTAR(16x16) 包裝:托盤 安裝類型:表面貼裝 產品目錄頁面:882 (CN2011-ZH PDF) 其它名稱:296-19316
UPD72255YF1-GA5-A 制造商:Renesas Electronics Corporation 功能描述:
UPD7225G 制造商:Panasonic Industrial Company 功能描述:IC