參數資料
型號： TPS65013RGZ
廠商： Texas Instruments, Inc.
英文描述： POWER AND BATTERY MANAGEMENT IC FOR Li-ION POWERED SYSTEMS
中文描述： 電源和電池管理集成電路鋰離子供電系統
文件頁數： 44/52頁
文件大?。?/td> 844K
代理商： TPS65013RGZ
www.ti.com
LED1_ON Register (Address: 08h—Default Value: 00h)
LED1_PER Register (Address: 09h—Default Value: 00h)
TPS65013
SLVS517–AUGUST 2004
Bit 5 - Fast charge timer + taper timer enabled:
0 = fast charge timer disabled (default), CHSTATUS < 3 >= status of the taper detect comparator output.
1 = enables the fast charge timer and taper timer. CHSTATUS < 3 >= status of the taper timer.
Bit 4, Bit 3 - MSB/LSB Charge current:
Used to set the constant current in the current regulation phase.
Clears all the timers in the charger and forces a restart of the charge algorithm.
0 / 1 = This bit must be set and then reset via the serial interface.
B4:B3
11
10
01
00
CHARGE CURRENT RATE
Maximum current set by the external resistor at the ISET pin
75% of maximun
50% of maximun
25% of maximun
Bit 2 - USB 100 mA / 500 mA:
0 = sets the USB charging current to max 100 mA.
1 = sets the USB charging current to max 500 mA. B2 is ignored if B1 = 0.
Bit 1 - USB charge allowed:
0 = prevents any charging from the USB input.
1 = charging from the USB input is allowed.
Bit 0 - Charge enable:
0 = charging is not allowed.
1 = charger is free to charge from either of the two input sources. If both sources are present and valid, the
TPS65013 charges from the AC pin source.
LED1_ON
Bit name
Default
Read/write
B7
PG1
0
R/W
B6
B5
B4
B3
B2
B1
B0
LED1 ON6
0
R/W
LED1 ON5
0
R/W
LED1 ON4
0
R/W
LED1 ON3
0
R/W
LED1 ON2
0
R/W
LED1 ON1
0
R/W
LED1 ON 0
0
R/W
The LED1_ON and LED1_PER registers can be used to take control of the PG open-drain output normally
controlled by the charger.
Bit 7 - PG1: Control of the PG pin is determined by PG1 and PG2 according to the table under LED1_PER
register
Bit 6 - BIT 0 - LED1_ON<6:0> are used to program the on-time of the open-drain output transistor at the PG pin.
The minimum on-time is typically 10 ms and one LSB corresponds to a 10-ms step change in the on-time.
LED1_PER
Bit name
Default
Read/write
B7
PG2
0
R/W
B6
B5
B4
B3
B2
B1
B0
LED1 PER6
0
R/W
LED1 PER5
0
R/W
LED1 PER4
0
R/W
LED1 PER3
0
R/W
LED1 PER2
0
R/W
LED1 PER1
0
R/W
LED1 PER 0
0
R/W
44
相關PDF資料
PDF描述
TPS65020RHA POWER MANAGEMENT IC FOR LI-ION POWERED SYSTEMS
TPS65100RGE TRIPLE OUTPUT LCD SUPPLY WITH LINEAR REGULATOR AND VCOM BUFFER
TPS65105RGE TRIPLE OUTPUT LCD SUPPLY WITH LINEAR REGULATOR AND VCOM BUFFER
TPS65111 Triple Chargepump for LTPS LCD
TPS65110RGE LTPS LCD BIAS POWER SUPPLY TRIPLE CHARGE PUMP
相關代理商/技術參數
參數描述
TPS65013RGZR 功能描述:電池管理 Multi-Channel 1-cell Li-Ion RoHS:否 制造商:Texas Instruments 電池類型:Li-Ion 輸出電壓:5 V 輸出電流:4.5 A 工作電源電壓:3.9 V to 17 V 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:VQFN-24 封裝:Reel
TPS65013RGZRG4 功能描述:電池管理 Multi-Channel 1-cell Li-Ion RoHS:否 制造商:Texas Instruments 電池類型:Li-Ion 輸出電壓:5 V 輸出電流:4.5 A 工作電源電壓:3.9 V to 17 V 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:VQFN-24 封裝:Reel
TPS65013RGZT 功能描述:電池管理 Multi-Channel 1-cell Li-Ion RoHS:否 制造商:Texas Instruments 電池類型:Li-Ion 輸出電壓:5 V 輸出電流:4.5 A 工作電源電壓:3.9 V to 17 V 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:VQFN-24 封裝:Reel
TPS65013RGZT 制造商:Texas Instruments 功能描述:IC POWER/BATTERY MGMT 48-QFN 制造商:Texas Instruments 功能描述:IC, POWER/BATTERY MGMT 48-QFN 制造商:Texas Instruments 功能描述:IC, POWER/BATTERY MGMT 48-QFN; Battery Type:Li-Ion, Li-Polymer; No. of Pins:48; No. of Series Cells:1; Operating Temperature Min:-40C; Operating Temperature Max:85C; MSL:MSL 2 - 1 year; SVHC:No SVHC (19-Dec-2012); Base ;RoHS Compliant: Yes
TPS65013RGZTG4 功能描述:電池管理 Multi-Channel 1-cell Li-Ion RoHS:否 制造商:Texas Instruments 電池類型:Li-Ion 輸出電壓:5 V 輸出電流:4.5 A 工作電源電壓:3.9 V to 17 V 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:VQFN-24 封裝:Reel
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*