![](http://datasheet.mmic.net.cn/140000/TLV5614IYZR_datasheet_5021001/TLV5614IYZR_1.png)
www.ti.com
FEATURES
APPLICATIONS
BUMPEDDIE
(BOTTOMVIEW)
SCLK
DV
DD
PD
DIN
LDAC
CS
FS
DGND
REFINAB
AV
DD
OUTA
OUTD
OUTB
OUTC
REFINCD
AGND
15
16
1
2
34
5
6
10
9
8
7
11
12
13
14
DESCRIPTION
SBAS401 – DECEMBER 2006
12-Bit, Quad Channel, 2.7V to 5.5V, DAC in
Bumped Die (Wafer Chip Scale) Package—Pb-Free/Green
Battery-Powered Test Instruments
Four 12-Bit D/A Converters
Digital Offset and Gain Adjustment
Programmable Settling Time of Either 3s or
Industrial Process Controls
9
s Typ
Machine and Motion Control Devices
TMS320DSP Family, (Q)SPI, and
Communications
Microwire Compatible Serial Interface
Arbitrary Waveform Generation
Internal Power-On Reset
Low Power Consumption:
–
8mW, Slow Mode; 5V Supply
–
3.6mW, Slow Mode; 3V Supply
Reference Input Buffer
Voltage Output Range . . . 2x Reference Input
Voltage
Monotonic Over Temperature
Dual 2.7V to 5.5V Supply (Separate Digital and
Analog Supplies)
Hardware Power-Down (10nA)
Software Power-Down (10nA)
Simultaneous Update
The TLV5614IYZ is a quadruple, 12-bit, voltage output digital-to-analog converter (DAC) with a flexible 4-wire
serial interface. The serial interface allows glueless interface to TMS320, SPI, QSPI, and Microwire serial ports.
The TLV5614IYZ is programmed with a 16-bit serial word comprised of a DAC address, individual DAC control
bits, and a 12-bit DAC value. The device has provision for two supplies: one digital supply for the serial interface
(via pins DVDD and DGND), and one for the DACs, reference buffers, and output buffers (via pins AVDD and
AGND). Each supply is independent of the other, and can be any value between 2.7V and 5.5V. The dual
supplies allow a typical application where the DAC is controlled via a microprocessor operating on a 3V supply
(also used on pins DVDD and DGND) with the DACs operating on a 5V supply. Of course, the digital and analog
supplies can also be tied together.
The resistor string output voltage is buffered by a 2x gain rail-to-rail output buffer. The buffer features a
Class-AB output stage to improve stability and reduce settling time. A rail-to-rail output stage and a power-down
mode makes it ideal for single voltage, battery-based applications. The DAC settling time is programmable,
allowing the designer to optimize speed versus power dissipation. Settling time is chosen by the control bits
within the 16-bit serial input string. A high-impedance buffer is integrated on the REFINAB and REFINCD
terminals to reduce the need for a low source impedance drive to the terminal. REFINAB and REFINCD allow
DACs A and B to have a different reference voltage than DACs C and D.
The TLV5614IYZ is built with a CMOS process and is available in a 16-terminal bumped die (wafer chip scale)
package. It is characterized for operation from –40
°C to +85°C in a wire-bonded, small outline (SOIC) package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
TMS320 is a trademark of Texas Instruments, Inc.
SPI is a trademark of Motorola, Inc.
Microwire is a trademark of National Semiconductor Corporation.
MCS is a registered trademark of National Semiconductor Corporation.
All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Copyright 2006, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.