參數資料
型號： TDA8007B
廠商： NXP Semiconductors N.V.
英文描述： IC LOGIC 1G02 SINGLE 2-INPUT POSITIVE-NOR GATE -40+85C SOT-23-5 3000/REEL
中文描述： 雙IC卡接口的多協議
文件頁數： 9/36頁
文件大?。?/td> 159K
代理商： TDA8007B
2000 Nov 09
9
Philips Semiconductors
Product specification
Double multiprotocol IC card interface
TDA8007B
Control registers
The TDA8007B has 2 complete analog interfaces which
can drive card 1 and card 2. The data to and from these
2 cards share the same ISO UART. The data to and from
athirdcard(card 3),externallyinterfaced(withaTDA8002
or TDA8003 for example), may also share the same
ISO UART.
Cards 1, 2 and 3 have dedicated registers for setting the
parameters of the ISO UART; Programmable Divider
Register (PDR), Guard Time Register (GTR), UART
Configuration Register 1 (UCR1), UART Configuration
Register 2 (UCR2) and Clock Configuration Register
(CCR).
Cards 1 and 2 also have dedicated registers for controlling
their power and clock configuration. The Power Control
Register (PCR) for card 3, is controlled externally. The
PCR is also used for writing or reading on the auxiliary
card contacts C4 and C8.
Card 1,2 or 3canbeselectedviatheCardSelectRegister
(CSR). When one card is selected, the corresponding
parameters are used by the ISO UART. The CSR also
contains one bit for resetting the ISO UART (active LOW).
This bit is reset after Power-on, and must be set to HIGH
before starting with any one of the cards. It may be reset
by software when necessary.
When the specific parameters of the cards have been
programmed, the UART may be used with the following
registers: UART Receive Register (URR), UART Transmit
Register (UTR), UART Status Register (USR) and Mixed
StatusRegister(MSR).Inreceptionmode,aFIFOof1 to 8
characters may be used, and is configured with the FIFO
Control Register (FCR).
The Hardware Status Register (HSR) gives the status of
the supply voltage, of the hardware protections and of the
card movements.
HSR and USR give interrupts on pin INT when some of
their bits have been changed.
The MSR does not give interrupts and may be used in the
polling mode for some operations; for this use, some of the
interrupt sources within the USR and HSR may be
masked.
A 24-bit time-out counter may be started to give an
registers TOR1, TOR2 and TOR3. This will help the
microcontroller in processing different real-time tasks
(ATR, WWT, BWT, etc.) mainly if the microcontrollers and
cards clock are asynchronous.
ThiscounterisconfiguredwitharegisterTime-Outcounter
Configuration (TOC). It may be used as a 24-bit or as a
16 + 8 bits. Each counter can be set to start counting once
data has been written, or on detection of a start bit on the
I/O, or as auto-reload.
相關PDF資料
PDF描述
TDA8012A Low power PLL FM demodulator for satellite TV receivers
TDA8012AM Low power PLL FM demodulator for satellite TV receivers
TDA8020 Dual smart card interface
TDA8260 Satellite Zero-IF QPSK/8PSK downconverter with PLL synthesizer
TDA8260TW Satellite Zero-IF QPSK/8PSK downconverter with PLL synthesizer
相關代理商/技術參數
參數描述
TDA8007BHL 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Double multiprotocol IC card interface
TDA8007BHL/C2,118 功能描述:輸入/輸出控制器接口集成電路 SMART CARD INTERFACE RoHS:否 制造商:Silicon Labs 產品: 輸入/輸出端數量: 工作電源電壓: 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 安裝風格:SMD/SMT 封裝 / 箱體:QFN-64 封裝:Tray
TDA8007BHL/C3 制造商:NXP Semiconductors 功能描述:Cut Tape 制造商:NXP Semiconductors 功能描述:Double Multiprotocol IC Card Interface 48-Pin LQFP
TDA8007BHL/C3,118 功能描述:輸入/輸出控制器接口集成電路 INTERFACE CARD MP RoHS:否 制造商:Silicon Labs 產品: 輸入/輸出端數量: 工作電源電壓: 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 安裝風格:SMD/SMT 封裝 / 箱體:QFN-64 封裝:Tray
TDA8007BHL/C3118 制造商:NXP Semiconductors 功能描述:IC RFID 20MHz LQFP-48
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*