參數資料
型號: SAK-C167CR-LM
廠商: SIEMENS A G
元件分類: 微控制器/微處理器
英文描述: 16-Bit CMOS Single-Chip Microcontroller
中文描述: 16-BIT, 20 MHz, MICROCONTROLLER, PQFP144
文件頁數: 27/67頁
文件大?。?/td> 809K
代理商: SAK-C167CR-LM
C167CR
Semiconductor Group
24
A/D Converter
For analog signal measurement, a 10-bit A/D converter with 16 multiplexed input channels and a
sample and hold circuit has been integrated on-chip. It uses the method of successive
approximation. The sample time (for loading the capacitors) and the conversion time is
programmable and can so be adjusted to the external circuitry.
Overrun error detection/protection is provided for the conversion result register (ADDAT): either an
interrupt request will be generated when the result of a previous conversion has not been read from
the result register at the time the next conversion is complete, or the next conversion is suspended
in such a case until the previous result has been read.
For applications which require less than 16 analog input channels, the remaining channel inputs can
be used as digital input port pins.
The A/D converter of the C167CR supports four different conversion modes. In the standard Single
Channel conversion mode, the analog level on a specified channel is sampled once and converted
to a digital result. In the Single Channel Continuous mode, the analog level on a specified channel
is repeatedly sampled and converted without software intervention. In the Auto Scan mode, the
analog levels on a prespecified number of channels are sequentially sampled and converted. In the
Auto Scan Continuous mode, the number of prespecified channels is repeatedly sampled and
converted. In addition, the conversion of a specific channel can be inserted (injected) into a running
sequence without disturbing this sequence. This is called Channel Injection Mode.
The Peripheral Event Controller (PEC) may be used to automatically store the conversion results
into a table in memory for later evaluation, without requiring the overhead of entering and exiting
interrupt routines for each data transfer.
After each reset and also during normal operation the ADC automatically performs calibration
cycles. This automatic self-calibration constantly adjusts the converter to changing operating
conditions (e.g. temperature) and compensates process variations.
These calibration cycles are part of the conversion cycle, so they do not affect the normal operation
of the A/D converter.
相關PDF資料
PDF描述
SAK-C167CS-4R33M 16-Bit Single-Chip Microcontroller
SAK-C167CS-L33M 16-Bit Single-Chip Microcontroller
SAB-C167CS-L33M 16-Bit Single-Chip Microcontroller
SAK-C167CS-4RM 16-Bit Single-Chip Microcontroller
SAK-C167CS-LM 16-Bit Single-Chip Microcontroller
相關代理商/技術參數
參數描述
SAK-C167CR-LM HA 制造商:Infineon Technologies AG 功能描述:16BIT CMOS CPU AUTO TEM MQFP144 制造商:Infineon Technologies AG 功能描述:16BIT CMOS CPU AUTO TEM, MQFP144 制造商:Infineon Technologies AG 功能描述:IC, 16BIT MCU, C166, 25MHZ, 144-MQFP; Controller Family/Series:C166; Core Size:16bit; No. of I/O's:111; Supply Voltage Min:2.5V; Supply Voltage Max:5.5V; Digital IC Case Style:MQFP; No. of Pins:144; RAM Memory Size:4KB ;RoHS Compliant: Yes 制造商:Infineon Technologies 功能描述:MCU 16-bit C166 CISC/RISC ROMLess 5V 144-Pin MQFP
SAK-C167CR-LM HA+ 功能描述:16位微控制器 - MCU 16-Bit Single-Chip 5V 25MHz ROM less RoHS:否 制造商:Texas Instruments 核心:RISC 處理器系列:MSP430FR572x 數據總線寬度:16 bit 最大時鐘頻率:24 MHz 程序存儲器大小:8 KB 數據 RAM 大小:1 KB 片上 ADC:Yes 工作電源電壓:2 V to 3.6 V 工作溫度范圍:- 40 C to + 85 C 封裝 / 箱體:VQFN-40 安裝風格:SMD/SMT
SAK-C167CR-LM-ES-HA 制造商:Infineon Technologies AG 功能描述:
SAK-C167CR-LMGA-T 制造商:Rochester Electronics LLC 功能描述: 制造商:Siemens 功能描述:
SAKC167CRLM-GAT6 制造商:Infineon Technologies AG 功能描述:MCU 16-Bit C166 CISC/RISC ROMLess 5V 144-Pin MQFP