參數資料
型號： Q67121C452
英文描述： IC-SM-8-BIT CPU-12MHZ
中文描述： 集成電路釤8位CPU - 12MHz的
文件頁數： 28/121頁
文件大?。?/td> 1000K
代理商： Q67121C452
Semiconductor Group
4-1
External Bus Interface
C501
4
External Bus Interface
The C501 allows for external memory expansion. To accomplish this, the external bus interface
common to most 8051-based controllers is employed.
4.1
Accessing External Memory
It is possible to distinguish between accesses to external program memory and external data
memory or other peripheral components respectively. This distinction is made by hardware:
accesses to external program memory use the signal PSEN (program store enable) as a read
strobe. Accesses to external data memory use RD and WR to strobe the memory (alternate
functions of P3.7 and P3.6). Port 0 and port 2 (with exceptions) are used to provide data and
address signals. In this section only the port 0 and port 2 functions relevant to external memory
accesses are described.
Fetches from external program memory always use a 16-bit address. Accesses to external data
memory can use either a 16-bit address (MOVX @DPTR) or an 8-bit address (MOVX @Ri).
4.1.1 Role of P0 and P2 as Data/Address Bus
When used for accessing external memory, port 0 provides the data byte time-multiplexed with the
low byte of the address. In this state, port 0 is disconnected from its own port latch, and the address/
data signal drives both FETs in the port 0 output buffers. Thus, in this application, the port 0 pins are
not open-drain outputs and do not require external pullup resistors.
During any access to external memory, the CPU writes FFH to the port 0 latch (the special function
register), thus obliterating whatever information the port 0 SFR may have been holding.
Whenever a 16-bit address is used, the high byte of the address comes out on port 2, where it is
held for the duration of the read or write cycle. During this time, the port 2 lines are disconnected
from the port 2 latch (the special function register).
Thus the port 2 latch does not have to contain 1s, and the contents of the port 2 SFR are not
modified.
If an 8-bit address is used (MOVX @Ri), the contents of the port 2 SFR remain at the port 2 pins
throughout the external memory cycle. This will facilitate paging. It should be noted that, if a port 2
pin outputs an address bit that is a 1, strong pullups will be used for the entire read/write cycle and
not only for two oscillator periods.
相關PDF資料
PDF描述
Q67126-C2088 RF inductor, ceramic core, 2% tol, SMT, RoHS
Q67127-C2036SAB-C161R1-L16M IC-SM-16 BIT CPU
Q67120-C2200 16-Bit Single-Chip Microcontroller Bare Die Delivery
Q67120-C1054 High Speed CMOS Logic Triple 3-Input NOR Gates 14-SOIC -55 to 125
Q67120-C1056 High Speed CMOS Logic Triple 3-Input NOR Gates 14-SOIC -55 to 125
相關代理商/技術參數
參數描述
Q67121-C848 制造商:INFINEON 制造商全稱:Infineon Technologies AG 功能描述:16-Bit CMOS Single-Chip Microcontroller
Q67121-C862 制造商:INFINEON 制造商全稱:Infineon Technologies AG 功能描述:C16x-Family of High-Performance CMOS 16-Bit Microcontrollers
Q67121-C900 制造商:INFINEON 制造商全稱:Infineon Technologies AG 功能描述:16-Bit CMOS Single-Chip Microcontroller
Q67121-C923 制造商:INFINEON 制造商全稱:Infineon Technologies AG 功能描述:C16x-Family of High-Performance CMOS 16-Bit Microcontrollers
Q67121-C942 制造商:INFINEON 制造商全稱:Infineon Technologies AG 功能描述:16-Bit CMOS Single-Chip Microcontroller
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*