參數資料
型號： MR80C32-25SBR
廠商： TEMIC SEMICONDUCTORS
元件分類： 微控制器/微處理器
英文描述： 8-BIT, 25 MHz, MICROCONTROLLER, CQCC44
文件頁數： 53/80頁
文件大小： 5152K
代理商： MR80C32-25SBR
253
XMEGA A [MANUAL]
8077I–AVR–11/2012
For reception, a fixed programmable minimum high-level pulse width for the pulse to be decoded as a logical 0 is used.
Shorter pulses will then be discarded, and the bit will be decoded to logical 1 as if no pulse was received.
The module can only be used in combination with one USART at a time. Thus, IRCOM mode must not be set for more
than one USART at a time. This must be ensured in the user software.
22.2.1 Event System Filtering
The event system can be used as the receiver input. This enables IRCOM or USART input from I/O pins or sources other
than the corresponding RX pin. If event system input is enabled, input from the USART's RX pin is automatically
disabled. The event system has a digital input filter (DIF) on the event channels that can be used for filtering. Refer to
“Event System” on page 67 for details on using the event system.
22.3
Registers Description
22.3.1 TXPLCTRL – Transmitter Pulse Length Control register
Bit 7:0 – TXPLCTRL[7:0]: Transmitter Pulse Length Control
This 8-bit value sets the pulse modulation scheme for the transmitter. Setting this register will have no effect if IRCOM
mode is not selected by a USART.
By leaving this register value to zero, 3/16 of the baud rate period pulse modulation is used.
Setting this value from 1 to 254 will give a fixed pulse length coding. The 8-bit value sets the number of system clock
periods for the pulse. The start of the pulse will be synchronized with the rising edge of the baud rate clock.
Setting the value to 255 (0xFF) will disable pulse coding, letting the RX and TX signals pass through the IRCOM module
unaltered. This enables other features through the IRCOM module, such as half-duplex USART, loop-back testing, and
USART RX input from an event channel.
TXPCTRL must be configured before the USART transmitter is enabled (TXEN).
22.3.2 RXPLCTRL – Receiver Pulse Length Control register
Bit 7:0 – RXPLCTRL[7:0]: Receiver Pulse Length Control
This 8-bit value sets the filter coefficient for the IRCOM transceiver. Setting this register will have no effect if IRCOM
mode is not selected by a USART.
By leaving this register value at zero, filtering is disabled. Setting this value between 1 and 255 will enable filtering, where
x+1 equal samples are required for the pulse to be accepted.
RXPCTRL must be configured before the USART receiver is enabled (RXEN).
Bit
76543210
+0x01
TXPLCTRL[7:0]
Read/Write
R/W
Initial Value
00000000
Bit
76543210
+0x02
RXPLCTRL[7:0]
Read/Write
R/W
Initial Value
00000000
相關PDF資料
PDF描述
MQ80C52CXXX-30/883D 8-BIT, MROM, 30 MHz, MICROCONTROLLER, CQFP44
MQ80C32E-36/883D 8-BIT, 36 MHz, MICROCONTROLLER, CQFP44
MQ80C154-25/883 8-BIT, 25 MHz, MICROCONTROLLER, CQFP44
MSP430F2003TRSAR 16-BIT, FLASH, 16 MHz, RISC MICROCONTROLLER, PQCC16
MSP430F2012IRSAR 16-BIT, FLASH, 16 MHz, RISC MICROCONTROLLER, PQCC16
相關代理商/技術參數
參數描述
MR80C32-30 制造商:未知廠家 制造商全稱:未知廠家 功能描述:8-Bit Microcontroller
MR80C32-36 制造商:未知廠家 制造商全稱:未知廠家 功能描述:8-Bit Microcontroller
MR80C51BH 制造商:ROCHESTER 制造商全稱:ROCHESTER 功能描述:CMOS SINGLE - CHIP 8-BIT MICROCOMPUTER 64K program Memory Space
MR80C86 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:CMOS 16-Bit Microprocessor
MR80C86/B 制造商:Rochester Electronics LLC 功能描述:- Bulk 制造商:Harris Corporation 功能描述:Microprocessor, 16 Bit, 44 Pin, Ceramic, LCC
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*