參數資料
型號: ML60851ETB
廠商: OKI ELECTRIC INDUSTRY CO LTD
元件分類: 總線控制器
英文描述: UNIVERSAL SERIAL BUS CONTROLLER, PQFP44
封裝: 10 X 10 MM, 0.80 MM PITCH, PLASTIC, TQFP-44
文件頁數: 27/88頁
文件大?。?/td> 1137K
代理商: ML60851ETB
Oki Semiconductor
ML60851E
31/84
DMA Control Register (DMACON)
Read address
DDh
Write address
5Dh
D7
D6
D5
D4
D3
D2
D1
D0
After a hardware reset
0
After a bus reset
The previous value is retained
Definition
0
Note 1: In the 16-bit mode, the upper byte of the leading word is 00h.
Note 2: The allocation is made in the little-endian sequence of the upper byte followed by the LSB. In
other words, the lower byte corresponds to AD0 to AD7 and the MSB corresponds to D8 to D15.
In the 16-bit mode, when the packet size is an odd number of bytes, the upper byte of the last
word is 00h.
Note 3: Make sure that all bits other than D7, that is, bits D4 to D0, are set completely during initialization
(at the latest, before the token packet for EP1 arrives) and are not modified thereafter.
When wanting to temporarily halt the DMA transfer in the middle, write a “1” in D7. When the
transfer is restarted by writing a “0” in D7, it is possible to restart the transfer from the byte (or
word) next to the one at the time the transfer was halted.
Note 4: The bits D6 and D5 are fixed at “0”. Even if a “1” is written in them, it will be invalid.
DMA Enable
0 = DMA Inhibited
1 = DMA Transfer of EP1 is
enabled
DMA Address Mode
0 = Single address mode
1 = Dual address mode
Byte Count
0 = The byte count is not inserted.
1 = The byte count data is inserted in the
leading byte or the leading word of the
transfer data. (Note 1)
DMA Transfer Data Width
0 = Byte wide (8 bits)
1 = Word wide (16 bits) (Note 2)
DMA Transfer Mode
0 = Single transfer mode
1 = Demand transfer mode
Halting DMA Transfer
0 = Normal operation
1 = The DREQ pin is deasserted.
相關PDF資料
PDF描述
ML610Q346 RISC MICROCONTROLLER, PQFP64
ML610346 RISC MICROCONTROLLER, PQFP64
ML610Q347J-NNNTB 8-BIT, FLASH, 4.2 MHz, RISC MICROCONTROLLER, PQFP64
ML610347-XXXTB 8-BIT, MROM, 4.2 MHz, RISC MICROCONTROLLER, PQFP64
ML610347J-XXXTB 8-BIT, MROM, 4.2 MHz, RISC MICROCONTROLLER, PQFP64
相關代理商/技術參數
參數描述
ML60852 制造商:OKI 制造商全稱:OKI electronic componets 功能描述:USB Device Controller
ML60852A 制造商:OKI 制造商全稱:OKI electronic componets 功能描述:USB Device Controller
ML60852ATBZ010 功能描述:USB 接口集成電路 12 Mbps; USB Device Controller RoHS:否 制造商:Cypress Semiconductor 產品:USB 2.0 數據速率: 接口類型:SPI 工作電源電壓:3.15 V to 3.45 V 工作電源電流: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:WLCSP-20
ML60852ATBZ03A 制造商:ROHM Semiconductor 功能描述:
ML-60-V2/80721 制造商:Thomas & Betts 功能描述: