參數資料
型號: MC68HC05V7FN
廠商: MOTOROLA INC
元件分類: 微控制器/微處理器
英文描述: 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PQCC68
封裝: PLASTIC, LCC-68
文件頁數: 155/170頁
文件大?。?/td> 589K
代理商: MC68HC05V7FN
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁第37頁第38頁第39頁第40頁第41頁第42頁第43頁第44頁第45頁第46頁第47頁第48頁第49頁第50頁第51頁第52頁第53頁第54頁第55頁第56頁第57頁第58頁第59頁第60頁第61頁第62頁第63頁第64頁第65頁第66頁第67頁第68頁第69頁第70頁第71頁第72頁第73頁第74頁第75頁第76頁第77頁第78頁第79頁第80頁第81頁第82頁第83頁第84頁第85頁第86頁第87頁第88頁第89頁第90頁第91頁第92頁第93頁第94頁第95頁第96頁第97頁第98頁第99頁第100頁第101頁第102頁第103頁第104頁第105頁第106頁第107頁第108頁第109頁第110頁第111頁第112頁第113頁第114頁第115頁第116頁第117頁第118頁第119頁第120頁第121頁第122頁第123頁第124頁第125頁第126頁第127頁第128頁第129頁第130頁第131頁第132頁第133頁第134頁第135頁第136頁第137頁第138頁第139頁第140頁第141頁第142頁第143頁第144頁第145頁第146頁第147頁第148頁第149頁第150頁第151頁第152頁第153頁第154頁當前第155頁第156頁第157頁第158頁第159頁第160頁第161頁第162頁第163頁第164頁第165頁第166頁第167頁第168頁第169頁第170頁
SECTION 11: 16-BIT TIMER
MOTOROLA
Page 71
MC68HC05V7 Specification Rev. 1.0
accompany a successful output compare provided the corresponding interrupt enable bit
(OCIE) is set. After a processor write cycle to the output compare register containing the
MSB ($16), the output compare function is inhibited until the LSB ($17) is also written. The
user must write both bytes (locations) if the MSB is written first. A write made only to the
LSB ($17) will not inhibit the compare function. The free-running counter is updated every
four internal bus clock cycles. The minimum time required to update the output compare
register is a function of the program rather than the internal hardware.
The processor can write to either byte of the output compare register without affecting the
other byte. The output level (OLVL) bit is clocked to the output level register regardless of
whether the output compare flag (OCF) is set or clear.
11.3
INPUT CAPTURE REGISTER - $14:$15
Two 8-bit registers, which make up the 16-bit input capture register, are read-only and are
used to latch the value of the free-running counter after the corresponding input capture
edge detector senses a defined transition. The level transition that triggers the counter
transfer is defined by the corresponding input edge bit (IEDG). Reset does not affect the
contents of the input capture register.
The result obtained by an input capture will be one more than the value of the free-running
counter on the rising edge of the internal bus clock preceding the external transition. This
delay is required for internal synchronization. Resolution is one count of the free-running
counter, which is four internal bus clock cycles.
The free-running counter contents are transferred to the input capture register on each
proper signal transition regardless of whether the input capture flag (ICF) is set or clear.
The input capture register always contains the free-running counter value that corresponds
to the most recent input capture.
After a read of the input capture register MSB ($14), the counter transfer is inhibited until
the LSB ($15) is also read. This characteristic causes the time used in the input capture
software routine and its interaction with the main program to determine the minimum pulse
period. A read of the input capture register LSB ($15) does not inhibit the free-running
counter transfer since they occur on opposite edges of the internal bus clock.
NOTE:
The Input Capture pin (TCAP) and the Output Compare pin (TCMP) are
shared with PB7 and PB6 respectively. The timer’s TCAP input is always
connected to PB7. PB6 is the timer’s TCMP pin if the OCE bit in the
MISCELLANEOUS control register is set. See 7.2.2OCE - Output
相關PDF資料
PDF描述
MC68HC05V7CB 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PDIP56
MC68HC05V7CFU 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PQFP64
MC68HC05X16FU 8-BIT, MROM, MICROCONTROLLER, PQFP64
MC68HC705X32FU 8-BIT, OTPROM, MICROCONTROLLER, PQFP64
MC68HC05X16MFU 8-BIT, MROM, MICROCONTROLLER, PQFP64
相關代理商/技術參數
參數描述
MC68HC05X16 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:High-density complementary metal oxide semiconductor HCMOS) microcontroller unit
MC68HC05X32 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:High-density complementary metal oxide semiconductor HCMOS) microcontroller unit
MC68HC05X4 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:HCMOS Microcontroller Unit
MC68HC05X4CDW 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:HCMOS Microcontroller Unit
MC68HC05X4DW 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:HCMOS Microcontroller Unit