- 您現在的位置：買賣IC網 > PDF目錄95919 > MC12429FA (FREESCALE SEMICONDUCTOR INC) 400 MHz, OTHER CLOCK GENERATOR, PQFP32 PDF資料下載
參數資料
| 型號： | MC12429FA |
| 廠商： | FREESCALE SEMICONDUCTOR INC |
| 元件分類： | 時鐘產生/分配 |
| 英文描述： | 400 MHz, OTHER CLOCK GENERATOR, PQFP32 |
| 封裝： | LQFP-32 |
| 文件頁數： | 3/9頁 |
| 文件大?。?/td> | 173K |
| 代理商： | MC12429FA |
MC12429
354
FREESCALE SEMICONDUCTOR ADVANCED CLOCK DRIVERS DEVICE DATA
Table 1. Pin Descriptions
Pin
Function
Inputs
XTAL1, XTAL2
These pins form an oscillator when connected to an external series-resonant crystal.
S_LOAD
(Int. Pulldown)
This pin loads the configuration latches with the contents of the shift registers. The latches will be transparent when this
signal is HIGH, thus the data must be stable on the HIGH-to-LOW transition of S_LOAD for proper operation.
S_DATA
(Int. Pulldown)
This pin acts as the data input to the serial configuration shift registers.
S_CLOCK
(Int. Pulldown)
This pin serves to clock the serial configuration shift registers. Data from S_DATA is sampled on the rising edge.
P_LOAD
(Int. Pullup)
This pin loads the configuration latches with the contents of the parallel inputs.The latches will be transparent when this
signal is LOW, thus the parallel data must be stable on the LOW-to-HIGH transition of P_LOAD for proper operation.
P_LOAD is state sensitive.
M[8:0]
(Int. Pullup)
These pins are used to configure the PLL loop divider. They are sampled on the LOW-to-HIGH transition of P_LOAD. M[8]
is the MSB, M[0] is the LSB.
N[1:0]
(Int. Pullup)
These pins are used to configure the output divider modulus. They are sampled on the LOW-to-HIGH transition of
P_LOAD.
OE
(Int. Pullup)
Active HIGH Output Enable. The Enable is synchronous to eliminate possibility of runt pulse generation on the FOUT
output.
Outputs
FOUT, FOUT
These differential positive-referenced ECL signals (PECL) are the output of the synthesizer.
TEST
The function of this output is determined by the serial configuration bits T[2:0].
Power
VCC
This is the positive supply for the internal logic and the output buffer of the chip, and is connected to +3.3V or 5.0V
(VCC = PLL_VCC). Current drain through VCC ≈ 85mA.
PLL_VCC
This is the positive supply for the PLL, and should be as noise-free as possible for low-jitter operation. This supply is
connected to +3.3V or 5.0V (VCC = PLL_VCC). Current drain through PLL_VCC ≈ 15mA.
GND
These pins are the negative supply for the chip and are normally all connected to ground.
相關PDF資料 |
PDF描述 |
|---|---|
| MC12430FA | 800 MHz, OTHER CLOCK GENERATOR, PQFP32 |
| MC1333 | UHF BAND, Si, NPN, RF SMALL SIGNAL TRANSISTOR |
| MC1413DR2 | 0.5 A, 50 V, 7 CHANNEL, NPN, Si, POWER TRANSISTOR |
| MC1413BDR2 | 0.5 A, 50 V, 7 CHANNEL, NPN, Si, POWER TRANSISTOR |
| MC1416DR2 | 0.5 A, 50 V, 7 CHANNEL, NPN, Si, POWER TRANSISTOR |
相關代理商/技術參數 |
參數描述 |
|---|---|
| MC12429FN | 制造商:MOTOROLA 制造商全稱:Motorola, Inc 功能描述:HIGH FREQUENCY PLL CLOCK GENERATOR |
| MC12430FA | 制造商:MOTOROLA 制造商全稱:Motorola, Inc 功能描述:HIGH FREQUENCY PLL CLOCK GENERATOR |
| MC12430FN | 制造商:MOTOROLA 制造商全稱:Motorola, Inc 功能描述:HIGH FREQUENCY PLL CLOCK GENERATOR |
| MC12439 | 制造商:MOTOROLA 制造商全稱:Motorola, Inc 功能描述:HIGH FREQUENCY PLL CLOCK GENERATOR |
| MC12439FN | 制造商:Motorola Inc 功能描述: 制造商:Motorola Inc 功能描述:MISCELLANEOUS CLOCK GENERATOR, 28 Pin, Plastic, PLCC |
發布緊急采購，3分鐘左右您將得到回復。